Hi y'all. I am new to air rifles, I'm a semi auto shotgun user but due to a very short and limited hunting season here in spain on designated hunting grounds, namely october to february and only on thursdays, saturdays, sundays and public holidays, Having permission on quite a lot of private land, and in order to not attract the attention of the authorities I decided to buy an air rifle, I bought a Hatsan 6.35 calibre (.25 in old money) 24 joules breakbarrel, scope, sound moderater etc. In the UK being over the legal limit of 16.7 joules this would require a full firearms licence. Anyway my point, is there any way to 'Tune it up', example get more power from it than the 24 joules it already produces..? It does feel powerful already and can stick a solid open point slug a good inch into a builders plank from around 40 yards, but would just like a bit more from it.

Saw this pop up on the youtube feed today from Alkin USA.
New water trap / muffler drain attachment for the W31.

Link:

AGN Members,

I added a Altaros Regulator from TalonTunes to my Talon SS. I need to readjust Regulator . In order to do this I have to remove it. How do I depessurize the tank? With 2000+ Psi I am a bit edgy on doing this. (AirForce Say's DO NOT dry fire) Loosen explosion disc screw a bit or slowly unscrew Top Hat valve from Regulator til it leaks slowly ?
BTW, Without the regulator I was getting 790-830 FPS Power wheel set at #8. I set the Altaros to 125 BAR now getting 640 FPS. Small change increase (650 FPS) at #10. Another Problem is My YH now shows 3000 Psi and the Talon only 2000 Psi, Altaros 140 BAR. Any knowledge on these questions greatly appreciated.

Bill

Up for sale my LCS Air Arms SK-19 .25. I am the original owner of this and have had a lot of fun with it. I have had no issues with it, and hold air perfectly. The barrel shroud was coated matte black, as I’m not a fan of carbon fiber look. Comes with Donny FL barrel adapter to use a aftermarket, ERGO grip installed, and factory grip. Scope is optional Hawke sidewinder 30SF 4-16x50, Donny Koi is optional
SK-19 $1400
Hawke $400
Koi $100
If all three $1800
No trades at this time. Split shipping within CONTUS. Zelle or PayPal f/f or plus 3%
Message me with any questions or offers

Up for sale is a used SWFA 3-15x42mm FFP scope. Scope itself is in good condition with a bit of rash on the turret edges from being moved in and out of the safe. The optic tracks perfectly and has no issues. It will come with Butler Creek caps and the throw lever that screws into the magnification ring.

Price is $380 and face to face pickup is preferred. I'm located around the Charlotte area and am open to meeting halfway. Shipping will be at buyer's expense. I prefer to deal in Zelle or Paypal.

I have decided to sell my .22 caliber Diana Bandit. I bought it new with the idea to build a custom carbine. Buck Rail had all of the components I wanted to make the transformation so soon after receiving the pistol, I bought the kit to build the carbine. What’s cool about it is that there was no modifications to the pistol other than taking off the original stock and sights, then bolting on the new kit parts. Really simple but made this thing more fun to shoot. After shooting it, I saw that the power curve did not lend itself to accuracy over a string of shots. So I added and Altaros regulator. That made things more consistent and the gun is deadly accurate at 25yds for 20 shots. It is exceptionally light weight (just under 4lbs.) and the perfect close quarters pesting tool you could ask for. It comes as pictured with all of the original components as well as the completed carbine kit. Here’s a list of the cost involved with building this:

Diana Bandit .22 $ 199.00
Buck Rail Lower $ 32.00
Buck Rail Side Folder $ 54.00
Minimalist Butt Stock $ 50.00
Front Rail Handguard $ 20.00
Dovetail to Pic Rail $ 10.00
Reflex Sight $ 32.00
Altaros Regulator $ 99.00
Carm Magazines (2) $ 40.00
Total Build Cost $536.00
Build price does not include original shipping costs on any of these items…
Full disclosure... There is a gouge and a couple of scratches from attempting to remove the moderator base. That is the only blemish.

I’ll let the entire package go for $350.00 shipped CONUS. Drop me a note if you have any questions.

Spent about 3 hours at the dairy farm yesterday. (Sorry! It's 70 and overcast here.) There are two areas I shoot. One is the feed pile where the birds, mostly Starlings now, Eat and poop. At that site I had about 10 dead Starlings and 1 collared dove. The other location was a farmer owned pole and wire that was at the entrance to the barns where there was feed in the trouhgs for the cows to eat.
My Alpha Wolf is DOA so I went to my back up rifles. I used my Daystate Pulsar with a Heli board at power level 4. Chrono says with the .22 Hades ut about 612 FPS. That rifle has a 9 round magazine. I went through 8 magazines and probably missed maybe 25 shots. This is 25yd shooting. At the power level I dropped from 230 bar to 200 bar. The pulsar is close to antique status, but it always hits where you aim it. Even after a long rest period between uses (maybe weeks). You do the math but there won't be as many Starlings breeding next Spring. The farmer reminded me that I shoot em and he takes care of the 'crime scene'. Also got a nice text that thanked me for helping control a costly problem for the farm. Farmeres should be a 'protected species' and we air gunners should help them any way we can.

This is an orchard and garden that I watch over for a friend.

I shot at (and missed) two rabbits while these guys (twins) were roaming around between me and the rabbits at about 50 yards. The rabbits were at about 80 yards. The ATN sets it's zero based upon what the LRF tells it. It reports that info on screen and in the video. The building behind the fawn is about 30 yards past him. I didn't trust the ATN and aimed high expecting the drop would be calculated wrong... nope. Gotta love JSB 15.89 in 20 cal at 28 fpe. Flat like a laser.

Their momma didn't care for the noise but she just kept back a bit, she didn't leave.

I know this has been discussed before, but kinda shocked that adding just a 20cc plenum to my .25 caliber RAW HM1000x gave me 1011 fps with 34 grain JSB's (77 fpe) using OEM spring.
The set-point has always been set at about 150 bar, but w/o the additional plenum ... same set-up maxed out at 930 fps.

The additional plenum had been on another lesser caliber gun, but felt it belonged on the higher powered gun.

Going to lower regulator set-point to about 140 bar with the idea of getting the gun to max out at around 940 fps. Trying to tune to about 910 fps for efficiency/low ES, knowing the gun can generally shoot 1 MOA at said velocity.

So I step outside at the edge of the evening as the air cools a bit to put a few rounds down range. I'm shooting at this Birchwood casey swinging spoons target at 25 yds. I usually shoot for group but I'm bit low on energy these days and I'm gonna be out of light soon. Anyhows. Things r going as expected "7 for 7" when the scopes windage cap fell off the scope. So I put it back on and snugged it up. And I'm thinking, " I wonder if that is going to change my POI". Lo and behold my next shot was a miss. Just to be sure I took another shot. miss. I had to adjust my windage 6-8 clicks to get poi back on target. The scope is a Hawke AMX 2-7 X 32. Do you think that would be the case with all scopes. Just changing the tension on a scope cap.

Selling a RAW hamster I recently aquired. I have a few already and do not need this one.

$175 shipped obo

Call/ text: (NINE16) 5three1-2349

Or email

camsprecisionairguns(@)gmail.com

Great shooting R5 Matador .25 Long in a limited edition. Set up to shoot slugs...see data below. Very nice condition. Huma regulator. I have had it a few months and it has been a safequeen. I have way more air guns than I need so this one needs a new home. Asking 1700 including shipping to CONUS. Call or text Ron 714.296.7489 PP FF preferred. Gun only but can add various scopes. Reduced to 1500.00.....Now 1450.00....OK try 1400.00 Great Deal at 1350.00. Lower More?? Try 1150.00 and that's it or I keep it.

A few members questioned if this was a Superlong. I bought this from a member who said it was a Superlong Magnum. I just measured it at 34 inches which means it is a Long version. This ad is now corrected. Thank you to the members who pointed me in the right direction on this. Not sure what to say to the guy who sold it to me. It is ,however, an awesome gun.
https://www.edgun.shop/collections/...5-limited-edition-long?variant=20888232624187


NSA 33.5. Filled - 250 bar.

1 - 1002 11 - 1024

2 - 1024 12 - 1022

3 - 1023 13 - 1024

4 - 1025 14 - 1025

5 - 1024 15 - 1022 1-20

6 - 1026 16 - 1021 Hi - 1026

7 - 1023 17 - 1021 Lo - 1016

8 - 1023 18 - 1018 Av - 1022

9 - 1024 19 - 1019 ES - 10

10 - 1024 20 - 1016 SD - 2



NSA 33.5. Filled - 250 bar.

1 - 1015 11 - 1013 1-19

2 - 1012 12 - 1016 Hi - 1016

3 - 1013 13 - 1014 Lo - 1011

4 - 1014 14 - 1014 Av - 1013

5 - 1013 15 - 1013 ES - 5

6 - 1015 16 - 1013 SD - 0

7 - 1013 17 - 1011

8 - 1013 18 - 1013

9 - 1015 19 - 1013

10 - 1013 20 - 1011

Hello everyone,

This package includes everything listed, pistols, scopes, rings, bipods, and other accessories. I have two (2) notations so please read and if you have any questions send me an email.

1) Those of you that know me also know that everything I have is absolutely like brand new and well taken care of. All items have all of the original factory manuals, equipment, supplies, etc. along with the factory boxes.
2) I will not sell any item individually and sold as a complete package only.
3) The quantity for each item is shown to the right of the description.

I have these listed on my website so the Package can be purchased with a credit card; www.uncletomsplace.net

I am asking $1,450.00 with Free shipping to lower 48 states. If you have a questions or want to make an offer please contact me.

Thank you,
ThomasT

Several months ago we had a woodchuck take up home in the backyard. He had burrowed under an old slab of concrete that I’m sure was once a patio. I was told by the better half he was cute and OFF limits. It really wasn’t a big deal. I was planning on doing a deck over that old patio anyway and chucky really wasn’t bothering anything. Fast forward to now. Deck is done and my wife caught ole chucky on the patio table eating all her plants . She put a bounty on his head now. Lmao. She took a pic of him on the table. I will have to have her send it so I can post it here. Anyone else’s sig other ever have a change of heart about backyard “pets”?

After many years of kicking it around I ordered an mklll this morning. Thank you to Steve at SPAW for putting up with me and answering all of my questions. Now the waiting begins, should have it by the end of this week or early next week. Yes, im an FX guy, and yes, I've been drinking the Kool-Aid!!!! I have an FX Wildcat currently and love FX airrifles!

Is 6x too much magnification for small game hunting inside of 50 yards? Thinking that I might want an Athlon Midas Tac 6-24 mainly for target shooting, but don't want to limit my ability to pop a squirrel if one gets in the way.

Looking to sell my fx dreamtac compact 22cal.
Gun has been tuned for crosman hollow points at 750fps for a nice ratting gun. It is LASER accurate with the cheap pellets at this speed, and gets 140 shots on a 250b fill of the 300cc bottle.
It’s very easy to tune it back up for high power shooting, and will do so without issue.
Currently has the 910 airguns short throw lever installed on it, and an ergo grip. Will come with both, as well as factory cocking lever and factory fx grip.

Asking $900 shipped with fx hard case, or can do $850shipped without case.
Either way, it will be well packaged, and shipped ups ground with insurance.

Buy with confidence knowing I have perfect seller feedback, and have done many transactions here on the classifieds.

Message for any more info or more pics

Scope and moderator not included. Comes with 1 factory side shot magazine, and will throw in 3D printed speed loader also.

Thanks for looking.

When I go to pull trigger back on first stage ( the travel amount creep ) and it rest up against 2nd stage …..and I don’t pull trigger it won’t spring back on its own it sticks….. kinda weird ? Any suggestions. It should spring back, maybe I adjust sensitivity to much , been adjusting triggers for awhile now and never had this issue

greg

I have Notos and use it as a carbine, and I really like it as a carbine.

Has anybody tried using the Notos as a pistol?

As the title say I'm looking for a low magnification FFP scope with parralax, this is for my PARD 007s and sp
I prefer FFP because i use the reticle with Strelok Pro and MTC Rapier

Got these in FFP already, a Vector Veyron 3-12x44, as well as a Taurus and a Continental 34mm, both in 3-18x50

Something like 2-7x32 or lower would be great

This is for a BRK pathfinder with transfer port adjustment. Which will give me more shot count: 100 bar and max power (fully open transfer port) or say 135bar with the power wheel dialed back (partial transfer port)?

Awesome to se he is not out of the game redesigned LDC coming soon..

I was thinking of buying a Foster dead head plug, but got to thinking I have some fill probes as well. It would be easy to make a dead head receptacle for a fill probe. I measured the probe and it was 0.312" in diameter that is close enough to 5/16" that just drilling a 5/16" hole into some metal may work. As long as the wall thickness won't yield, worst case the surface finish from drilling is too poor so it leaks.

Found my leak!
Look at your atmospheric blead hole on the right side of your Impact.
Small leak over a few weeks is a thing to troubleshoot. A bit of soap an water is cheap and affective.

C39 19790 O-ring 10x1,5 NBR90
A bit of a challenge, but most can do it with patience.

I'll say up front that I'm relatively new to PCP tuning. I'm having troubles getting a consistent tune. Here's what I'm trying to achieve:

Setup: FX Maverick 700mm .22 with 11 gram hammer, Huma pellet probe and hammer spring, shooting through the slug transfer port.
Pellet: JSB Exact .22 Monster redesigned
Goal: consistent speeds around 950 FPS

And here's what I did:
- Find the regulator pressure resulting in a plateau of 1000 FPS at maximal hammer spring tension. This turned out to be 120 bar on the rear regulator, so I set the front to 150 bar for a 30 bar difference.
- Turn back the hammer spring tension to find the 95% optimum at 950 FPS. This turned out to be half way the preset wheel (4 out of 7). The difference between 4 and 5 is quite big (940 at setting 4 and 970 at setting 5). I tried to finetune using the preload screw, but that didn't do much.

I now have an average of 940 FPS, but the spread is quite large (range from 920 to 975, not changing the hammer spring tension). At 100 meters, I can also see that the rifle is not very consistent.
What would the more experienced people around here advice me to do to achieve a more consistent FPS? Lighter hammer maybe? Or more pressure? Any advice is appreciated!