I see Buck Rail is now offering a "pump-action" conversion kit, for the Umarex Notos.
Seems like a great idea for fast, follow up shots.
No more fumbling for the left handed, flush fitting side lever.

Just wondering anyone out there shooting these 25 calibre H&N HP2 slugs in 28, 30, 32 and 34gr in their guns.

What speed for each weight?

Thank you.

As new and works perfectly.
Includes sunshade and focus lever.
$200 shipped east of mississippi, west is $15 more.

I picked up a pre-owned compressor. This is a GX-E-CS2. No manual or instructions.
Looks like foam filter in then handle to catch moisture.
Is there a better moisture prevention system for this compressor??
Also, the fill probe fits loosely in the bottles. Just need new O'rings????
Seems like it might be hard to line up the hole in the probe to the hole in the tank.
Is there a trick to this???

I did get what I need to run AC and DC.
Thanks
Good Shootin!!
DarryH

I have a friend with 22cal gamo swarm he wanted to try slugs neilson has some 17.5 in all different diameter! Anyone know which one works best without having to buy all of them?

$800 or best offer

Selling my .22 cal Ataman M2R Type 4, pretty sure I am the only one in America with this rifle, everyone else has the compact. Prove me wrong would love to see some pics . Love this rifle, shoots amazing groups 50 yards and beyond, but times are tough have to sell her. Comes with all you see here, The rifle, .25 cal Donny FL Tanto moderator, Bipod, Axeon 4-16x44 EDR scope, 1 magazine, machined foster fitted fill probe, and a Ataman bag. Let me know, thanks.

I bought a rifle in a pawnshop with a torn piston. Probably the piston cap was not securely fixed at the factory, that's why the piston was torn off. These are the consequences, the thread of the piston cap was worn out, I did not find any other damage, the thread on the piston is intact. I only ordered a new cap. The rifle is in mint condition, this is evident from the blueing of the piston. They tried to repair the rifle, but they could not disassemble it completely, they also could not reassemble it correctly, since the rifle is very complex in design and experience in repairing these rifles is needed. Many parts were lost during assembly and disassembly. The missing parts did not turn out to be a problem and I ordered new OEM ones. My question is the following, is it worth putting the cap on the thread lock? I am afraid that there is some invisible defect in the piston and the cap will be torn off again, will it hold reliably? Or maybe use JD glue or epoxy?

Hello all.

I recently became interested in air guns back in April, after accidently coming across the sport with a parallel hobby. As luck would have it, a former colleague sent me his old air rifle to use as a learning platform. Fast forward to today, and I now have 4 air rifles (including the first), a portable compressor, a not so portable compressor, a 9L tank, and a high pressure "bike pump" (used once, almost died, bought the portable compressor immediately).

I've been extremely blessed with some of the folks I've met locally, providing me with a ton of information as well as opportunities at gear I probably wouldn't have come across so early in the hobby. Thankfully, or regrettably, I have very limited impulse control and have seized most of the opportunities that came my way.

I look forward to learning and growing in the sport, I even have thoughts of competing at an event in October. We'll see what the cards hold.

Regards,
ZV

Edited to add my rifles are PCP's, hopefully answering the question before it's asked.

gun has had about 2 mags shot througe it tack driver shoots 25 gain pellet at like 907 fps come with fill probe and 1 fx mag i am first owner got it from u tah air when they came out super nice rifle and shoots really good this rifle came wit larger pendum from factory

Fx Dreamline Lite
Original stock included and mounted in a saber tactical chassis
Carbon bottle installed and including original cylinder type
Power plenums installed and includes extra seal kit
Huma regulator installed
Upgraded to fx impact barrel shroud and liner with carbon tension sleeve and donnyfl mod

.25 caliber and very fast

Have an arrow barrel kit if interested.

$1000 obo. I'll include the arrow barrel and several extra mags.

FOR SALE: The Ultimate Custom Airgun – No Stone Left Unturned!

This is your shot—to own a fully-modified monster of an airgun. Built from the ground up, this beast was tuned to run 21gr hybrid slugs at 850fps, effortlessly doing so for over 150 consistent shots per fill. Truly a This is the “buy once, cry once” kind of setup.

If you’re looking for plug-and-play performance and the kind of craftsmanship that turns heads at the range—this is it. I’m only letting it go because I don’t need two airguns in the same caliber... otherwise, this beauty would never leave my hands.




$850 + Shipping w/ UTG BugBuster Scope ($1600+ Invested)

$750 + Shipping without Scope ($1400+ Invested)
Open to Trades



Build & Mod List — Everything You Could Dream Of:

All ports opened to 4.5mm
Tuxing 360cc Bottle
C88 380mm FX Liner System
380mm STX Superior Liner
Buckrail Chassis – Lightweight & Tactical
Huben Dream Regulator – Consistent Pressure Delivery
CRC Precision Plenum
Aluminum Lever – Smooth Cocking Action
Full Trigger Kit – Crisp, Tuned Trigger Pull
Hammer Weight + Upgraded Poppet Valve
Huma-Air MOD30-3\0 Mod – Super quiet
Ergo Suregrip
Hajimoto Bottle Clamp + Mag
Stock Mag Included
Spike Industries Folding Brace
PP750 Stock Grip w/ Custom Airgun Archery Fun G10 Grips
UTG BugBuster Scope (if purchased w/ scope)

BONUS: Includes 200 FX Hybrid Pellets

The back story.

I am a newbie to PCP guns. My first one is a Ghost with a Hawke Airmax 30 WA SF scope I have had for a couple months. I am not a serious shooter, rather a backyard duffer/plinker.

My Ghost was grouping pellets like I was a pro shooter for about three tins of pellets. Then one day my groups moved about 1" left and 1" low. Consistently. So I zeroed the scope again and all was good for 50~60 pellets. I was still grouping good but would get a stray every five or six pellets. The stray would be 2" or so off the group. One day my first pellet was 6" low! Later I dry fired the Ghost not realizing my mag was empty. A large puff of vapor came out of the barrel. I am guessing vapor as it looked like thin smoke.

I fill the Ghost using a GX cs4i in my air conditioned shop. Thinking the drier air in the A/C would be good enough without a separate moisture filter. That thinking was apparently wrong.

When I bought into PCP I had planned on using nitrogen to feed the compressor. I modded the compressor so it would accept my nitrogen tank/regulator or use the compressor like it was designed. I did this for when I was filling the Ghost outside in my humid Florida environment. So I emptied the Ghost and refilled it using nitrogen yesterday evening. Went out this afternoon and shot about fifty pellets. Every five shot group was back to what it was when I first got the Ghost. The POI did not move back but tight groups and no strays.

So, for you experienced shooters, was moisture causing my bad groups?

* Hello everyone I hope you have a nice afternoon, I'm here looking for some kind of help or recommendation what should I do with my FX M4 .22 700mm sniper, I'm currently shooting 32 to 34gr slug, my highest point of impact is at 50 yards with a velocity of 960fps, at 50 yards I can make about 30 shots very consistent accurate, the problem is when I change to 70, 80, 90, 100 yards, the point of impact Automatically MOVES TO THE RIGHT About 3 centimeters, the further away you have the target the more it continues impacting to the right but the consistency of the groups are almost perfect 23.78mm MOA at 100 yards, but I need help or know how to do so that it does not make this impact to the right my M4 has many improvements.

HOW TO:
1- Barrel swap for a 700mm STX heavy duty barrel.
2- Carbon fiber barrel.
3- M3 barrel clamp with two bolts.
4- Carbon fiber barrel tensioners.
5- SUMÓ DONNYFL silencer.
6- Slug power kit.
7- Digital pressure gauge behind the grip.
8- TRS rail.
9- ARCA rail.
10- New telescopic sight.

I WOULD APPRECIATE YOUR HELP. I honestly don't know what to do with this problem anymore, but everything is working correctly afterward. I would appreciate your answers. Thank you.

I recently purchased an E5K1, which as far as I can tell has the same type water-cooled system as the K2 model. I used the compressor only to fill up my airguns (Umarex .30 Gauntlet and .50 Hammer) never used it to fill tanks. Unit setup was easy, and I thought I'd finally got a compressor that would last. I was impressed with the quick fill times, cool and quiet operation. That lasted a grand total of ONE hour operating time, according to the on-board hour-meter. The water pump stopped working, or would turn off after a few seconds. I could tell water was only circulating intermittently by watching the spinning/stopping of the flow indicator on the side of the compressor.

I'm really starting to question the quality / quality control of Chinese compressors at this point. I started with an Air Venturi Nomad, which lasted until the warranty ran out. This was followed by a Spiritech VE3, which quit working after several months. I was able to get a refund on that through Amazon. Next came a TUDIVING TXEDT032, a water-cooled beast with an engine about the size of a volkswagon beetle. Surely, I thought this would handle filling my guns with ease. Not so. Just after the Amazon 30 day return period expired, it gave up the ghost, refusing to produce more than 3000 psi. After monumental efforts, a refund was issued. Since I'm starting to get paranoid with all these failures, I decided to buy a little TUXING TXET063 4500 PSI digital compressor to use as a backup to the next compressor I set my sights on: the mighty GX-E5-K1... not the monster the K2 is but surely this one could handle my meager requests. By now, I'm starting to think conspiracy theories, that the Chinese are trying to destroy our great nation by sending us faulty air compressors. I'm in the process of returning ANOTHER air compressor. If I've learned one thing it's ALWAYS get the extended warranty!

If it was only me having these compressor problems, it would be one thing. I'm just a relative newcomer to airgunning, with only a couple of years experience and 23 dead coyotes under my belt; I don't know a ton of other airgunners. But I have a buddy whose a fellow airgunner, and he too has run through about 5 or 6 compressors. He has another buddy whose had similiar experiences.

Can anybody shed some light these compressor issues? What do you guys with lots of experience use for your guns? What compressors are the most reliable, having long service life? Thanks so much in advance!

Bought this from a machinist member here, never got around to installing it. A heavy duty valve kit designed to hold up to a vet 1 being pushed to highest power ability for slugs. Comes with installation instructions as well. $100 PayPal F&F , conus. Shipping included. Will not work on vet 2. Thanks

I emailed HatsanUSA to enquire as to the availability of a oring kit for my Hat.At44. I was having some difficulties locating a complete set. My email was answered by Kadden who informed me that they did have them. Kadden requested a copy of my receipt and address. This was on a Thursday evening. Sunday, father's day, the complete oring set in my hands.
So I just wanted to come on here and give credit to HatsanUSA and Kadden for making MY customer service experience easy and very fast to get the product to me. I don't know if Kadden is a member or if the HatsanUSA people read these but just want to say Thank you from a very happy Hatsan owner.

Hello good men and potentially women as well, I've got a bit of an issue with my Priest 2 which I'm hoping you could help me solve.
The hammer in my gun broke, to be exact the part that sticks out on top of it simply snapped off, is there way to fix it to make it functional, even if not for very long?
Also, what's more important, I'm obviously looking to buy a new one and on RTIs shop the ones for Prophet 2.1 look considerably more rugged so I'd like to buy that one, does anyone know if they're compatible? They kinda look like they would be but you never know.
And lastly, just to be sure, I wanted to order the pivoting part of the trigger, part number 46 to be exact, I'm fairly sure it's the exact same part between the 2 (there's no Priest 2 specific parts apart from a few select ones) and the same question for all of you, is it compatible?

Hello,

What are you impact m4 settings ? In .22 and .25

Reg pressure
Micro/ macro wheels

I would run around 950fps in .25 , 25.4grn pellets and would compare

Kral Empire X Bullpup air rifle with Walnut wood stock. In .25 cal, comes with CVLife bipod and CVlife Bestsight 3-9x40 illuminated scope. This has the tube air cylinder.
Comes with fill probe and two magazines and one 3D printed single shot tray. Rifle is in excellent condition and has held air for as long as I have owned it. Very accurate, tack driver. Just thinning my stash of air rifles. Shipping to CONUS only where air rifles are allowed. $650, Shipping included.

I am trying to determine the value of my FWB 603 . Any information on the best way to do this would be appreciated.

C88 zelos bottle adapter with gauge $40 to your door

I have two compressors down. Waiting on simple gaskets & O rings for one. If you need parts today & have.China made compressor.
you have a long wait. Seems like two months minimum. If anyone here knows a faster way to get parts, please speak up. Fly

Are compressors potentially dangerous given high pressure. What safety gear should I wear while using? Thank you.

Hello all! Just wanted to Share my first hunt day with slugs. Most shot were between 40-100yards. Before I used pellets but the wind throw off a lot of shots past 40-50yards...

Finally got a good combo of slugs and velocity for my uragan2 600 .22.