I have a .22 leshiy 2 with a 350mm barrel that has been custom threaded for 1/2x20. It will come with one mag, 350cc bottle, wika reg guage, Valkyrie aluminum handguard, fx shroud that goes over and mounts to the barrel, and a Huma-Air Raptor Tuning Regulator. Your choice of grip if you want multiple I will add for a fee and will come with a hugget belita for $2200TYD only trades I would consider are .30's nothing specific yet so let me know what you have.

Please know that I’m only shooting at this distance for the fun factor. Using 10 MILs of holdover, I can see the pellet drop down from the top of the objective as it hits or misses the intended targets. Today I got three hits on five attempts. Of course wind conditions have to be just right. But in real practical terms for pesting, this little demon is murder on small pest out to 60 or more yards in a good shooters hands. That saline bottle is the size of a chipmunks body.

I have a brand new cvlife bipod and scope for sale. The scope is a 3-9x40. Asking 35 for both of them. Won't come with the rings on it, but will come with the rings that came with it.

If your was to shoot a different airgun you own every day. How long would it be before your rotation of starts over?
Estimates are fine.

Been about 6 months since my last tree rat, guess I did a pretty good jobs keeping these roof eaters off of my roof! Speaking of the roof another neighbor has been spending thousands repairing his roof damage from them and water damage from the leak.

Today was the first hot day, shot straight to about 85 by noon. I was messing around with some stuff and saw some movement in my tree, ran to my garage and grabbed my trust dream-tac compact loaded with hades. To my surprise it was still on my tree because last couple of tree rats high tailed out of my yard as soon as they saw me, guess this one didn't see the Facebook post about my yard! So I put the center dot on its vitals through its shoulder and squeezed the trigger. Solid thump, like normal it tried to climb the tree but couldn't, it came back down but it was behind the tree so I couldn't see it. Usually they pass out about 5-8 feet from the trunk. Just as I was about to go over there it appeared at the based of the truck not dead! Guess my shot wasn't good enough so put the dot between the eye and ear and thud again! This time it did the death flop for good 15 seconds, I thought it would ran out of gas long ago.



It was an older female, pretty good size. Tried to find the pellet as usual and I was really shocked by how that thing isn't dead from the first shot, the 177 hades pellet was more deformed I have ever seen, must of hit all the bones.


Then I found the headshot pellet too, it didn't pass either like usual so this is definitely one really tough tree rat, maybe toughest ever for me!!!

This gun is the Ultimate Ratting/Pesting/Plinking Setup! A Complete Package Ready to Shoot. $1850 complete and to your door
** Don't let the price scare you off yet... keep reading for all the details**

Gun is a Beautiful Silver/Black FX Impact MK1 upgraded to MK2 Block & Power Plenum. This gun is FRESH! All new Oring kit and seals installed and tested. This gun DOES NOT LEAK... PERIOD! and unlike an M3 it probably never will. Additional upgrades include a new Huma High Pressure Regulator, FX/Wika Regulator Gauge, Saber Tactical Ambidextrous Cocking Block with M3 Short Throw cocking lever and knurled rubber cocking handle, Saber Tactical Cheek Riser with custom "Soft Touch" Cheek piece, Custom Buttstock with Atlas Monopod/Bag Rest and QD Sling mount holes, K&L Trigger Guard Extended Rail with Picatinny and ARCA all in one. Gun/Kit also includes FX "Empty Can" Moderator, 300cc FX CF Bottle, a "Knock Off" (fake) Atlas bipod, and FX Impact Hard Case. Now to the important details.. I'm selling this gun in a combination 177 AND .22 setup. With this package you will get both 177 & .22 500mm Barrels with Superior Liners and caliber respective probes, x2 FX Factory High Capacity Sideshot Magazines in .177 and x1 Factory High Capacity Sideshot magazine in .22. The .177 mag pkg also includes x2 Speed loaders and pellet "Shaker" to load the speed loaders. Also to make this a complete "Ready to Shoot package a Vector Veyron 4-16x44 FFP Scope and mount are also included. I'm also including a new tin of .22 JSB Hades and x2 tins of .177 JSB 13.4g Monster Diablo pellets.

The best part of this package in my opinion is that you don't really have to adjust the tune to shoot either caliber. You'll have to shoot it to fully understand but the power profiles are really close.

Recap and Pics: EVERYTHING listed above in the description (and it's a lot!!) - $1850 shipped/insured Conus. Paypal F&F or you cover the fees. Zelle & Venmo also considered. ** Not looking for trades or deals, serious inquiries only please** I prefer a conversation to answer any and all questions, contact info sent on request.

Here we have an HW30s in .20Cal that I bought new (AoA) several months ago, to date I have fired one tin of pellets through it and found everything to be as expected. As this is my last .20 I'm also going to let go of my .20 pellets. 2000pellets in sealed tins. 1500 H&N Field Target Trophy 11.42gr and 500 H&N Baracuda 13.58gr.

$375 Shipped to your door where legal.

I was looking over some of the site functions and got curious when I saw the “current visitors” tab. I was wondering, “how would AGN know who these people are?” When I clicked that tab many of the visitors just said “Guest” where a username would be. BUT I also noticed bots that were combing the threads. Some of had huge tech company names attached to them and others had names I’ve never heard of. I clicked one of the bot names and it started to take me to another site. I closed that tab.





I don’t know much about bots. Can any members or staff explain their purpose here? I would imagine some are the result of people using search engines, but what about some of the other ones? Are any of them malicious? Is there a way that we can differentiate one from another with relative ease?

Selling as one lot. $125 shipped CONUS PP F&F or buyer pays fee.

H&N Baracuda 18 3 sealed tins
H&N Baracuda Match 21.14/5.52 5 sealed tins
H&N Baracuda Match 21.14/5.51 2 tins, not sealed, one appears to be full, the other about 75%
H&N Field Target Trophy 14.66/5.53 3 tins sealed, 3 not sealed but appear to be full
Beeman Kodiak 21.12 copper plated 1 tin sealed
Polymag 16g 4 tins not sealed but appear to be full

So just wondering how many members here respond to these adds? If so what are your results, as for mine it is a waste of my time.

I need to know if this is okay to use its secolube 500 Its only been in there 15 minutes but its this dark WHATT??, I though the first oil change gets all that stuff , How come only 15 minutes in an my secolube is that dirty is it alright to use despite the color its only 15 minutes old.

With the long list of EBR podiums credited to the Impact platform (not necessarily the M3, though), I was quite surprised at how much mush there is on the second stage.

Don't get me wrong, it's on OK trigger...for a bullpup. But certainly not what I was expecting given that podium pedigree. Not match-grade by a long shot, IMO.

So what are you all doing to get a cleaner break?

Hello, its was time to clean the barrel of my Maverick. The screw for removing the barrel is stuck in the shroud. Any Idea's to remove it.
Sorry for my english.

Hey guys. I got a Panthera and now I'm learning to tune it. It's not a straight forward thing. There are different ways to arrive at your desired FPS. I was struggling, but got some good insight in this thread: https://www.airgunnation.com/thread...22-regulator-adjustment.1289858/#post-1492344

Now I'm ready to collect some tunes! (tuning numbers)

---

PLEASE POST YOUR FAVORITE TUNES HERE:

18.1gr factory tune out of the box (.22 cal): Power Wheel (Macro) 22 / Micro Wheel: 2.5 / Regulator 85 BAR
This tunes gives me 90 shots at 890 FPS exactly. It holds 1 inch groups at 75 yards, even if your not shooting your best. Super fun tune for plinking with friends.

....still looking for that 25.4gr tune! -Nate

---

How to Tune a PANTHERA:

* NEVER shoot a Panthera below the regulator pressure.
* NEVER adjust the Regulator above 180 bar.
* Set the Regulator at the lowest possible pressure to achieve the desired velocity.
* Remove AMMO before adjusting Regulator.

Turning the Reg UP:
* You must have more air in the tank than the desired reg pressure, before you start.
With air in the gun, gently turn the allen screw inside the front top corner of the trigger guard no more than 1/4 turn counter clockwise to increase Reg pressure, check the dial, Repeat until the needle reads the desired pressure.

Turning the Reg DOWN:
* Make sure gun is EMPTY of AMMO before you start.
With air in the gun, turn the reg adjustment allen screw clockwise no more than 1/4 turn to decrease reg pressure.
Shoot the gun with no ammo a few times untill the reg pressure stops dropping. That is your new reg pressure. Repeat if nessecary.

NEVER ADJUST the POWER WHEEL when GUN IS COCKED!!!

Sold
$900.00 shipped insured to your door insured.
If you have the same scope but with the MOA-H reticle I will swap ya straight up and pay shipping.

Retail is $1579.00 you will have a $500.00 savings.

Basically brand new - I mounted it and during setup I quickly decided that Mil-hash is not my thing; my brain needs a MOA Christmas tree style reticle. If you have the MOA-H same model i will swap ya straight up and pay shipping.

Comes with the original box, the scope, the ranging wheel and the rubber eye cup.

The Rowan Pointer and Throw lever you see were adds to the scope, i didn't need them, but they are NOT included.

Fastest results by texting Rudy Smith 251-610-8582.
I have lots and lots of positive feedback from our fellow AGN troupers.
PayPal account:
[email protected]
Venmo: Rudy-smith-15
Please look carefully at model # on box and use Sightrons website for details: https://sightron.com/collections/siii-field-target-series-1

YES FT guys - 16x is marked on the scope and it is illuminated.

Like new, purchased from SPAW, original Power Block many accessories including, Air Marksman backbone, saber Tactical arca rail, ergo vertical grip, Donny Tatsu, Bullet Central CF barrel tensioner, FX CF liner sleeve, CARM SS shot adapter, two liners. All original parts included. $2450.00 PayPal, Conus only.

There’s been more and more coyotes around my neighborhood they’ve been snatching little dogs in backyards. I have several pups as well and I want to do something about it. I’ve never shot at an animal this big before and hope you guys can give some pointers.

1. Would a .22 suffice or is a .25 required？
2. What fpe is ideal?
3. Are Jsb Diabolos sufficient?
4. What’s the best shot placement?
5. Any tips on luring them out?
6. What’s the best time to watch out for them?

In excellent condition, like new.

$130 shipped CONUS. Zelle, PayPal, USPS money order accepted.

In excellent condition, could pass for new. Not getting along with FFP, but love the clarity & turrets (going to replace with a Heras SFP).

$500 shipped CONUS (can discuss options for non-CONUS). Zelle, PayPal, USPS money orders accepted.

I have a .25 pcp (hatSan vectis) and I’m wondering what is the best ammo to use for groundhogs? It groups well with both slugs and pellets. I have polymags and h/n slugs that both group nearly equal. Thoughts and opinions welcome

It was another great day of splitting cards at the 200 yard range. IMHO, the Diablo Rod and Gun club in Concord CA is the best air gun range in northern California. The RSO's and other air gunners are great to be around. I can honestly say that I haven't met a airgunner I did not like at the Diablo range.

I 3d printed a better card holder which holds oversized card stock. Now the cards pretty much stay in place after splitting, or partially splitting them. I also taped on some short wind flags to help me read the winds.

Both top cards took about 12 shots each to split. The top right card was a perfect split, down the middle. The top left card was partially hit and split 4 times! The winds picked up a bit and the 2 bottom cards took a ton of shots to split them.

Like I said, "great day at the range"
Rod in San Francisco






4 times

Like new, got it early this year from Krazy Cool. Gun is set by Kelly to shoot nsa slug at 965fps. 24.8g .219. Gun have only been in the back yard, dime size or better at 25y. Also shoot Monster redesign pretty well also. Have not mess with the setting at all. Have never leak or jammed, operated flawlessly.

Reason for selling: strange but semi-auto is not my thing, I’m missing the mechanical loading/unloading.

$1550 shipped or free pick up in San Diego CA. No trade please.

Will come with box, orings and manual + 4.5. Boxes or nsa slug 350/box.

Scope&rings not included but can have for additional $250.

Paypal ff or add fee
Bang
8fi8-876-tutu64

Hello everyone, I've finally gotten my Benjamin Marauder .25 cal all set up with a Hawke 3-9x40 scope. I've got 10 different types of pellets in, and I've got my Hill air pump in finally.

I have only shot it about 120 times or so now. A fellow I met gave me a free fill up off of his tank while I was still waiting on my pump. That was enough to get me sighted in at the local range and get a couple groups.

I got the pump yesterday and may or may not be shooting the rifle indoors across the longest stretch of the home (about 23 yards). I'm getting some good groups... I've been using a big stack of magazines taped together inside of a cardboard box and a taget stapled on it. Tested it in the backyard and no way the pellets will get even close to going through it.

So far everything groups fairly well at 20 yards. Nothing shoots much worse than a clover leaf and many shoot one hole to my surprise. I'm very happy with the performance indoors.

The Hill air pump (made in Sheffield, England) is a very fine piece of machinery. It has a very nice finish, is smooth to operate, has nice rubberized handle grips, and went together dirt simple. The thing is built like a tank and it doesn't start getting hard to operate till it hits about 2700-2800 PSI, and even then it's not very hard to pump. The attachable moisture removing element is a great add on that I think is a must. Dry air is always best!