I am thinking of the Panthera 500 for next summer and getting it as a hunting gun. I know this is a PRS rifle but I feel like the Panthera 500 would be a great gun for hunting to ranges to 150 yards or even more. Do you think the Panthera 500 would be the best for hunting between the three models or a different gun all together?

Looking for a DonnyFL Tanto 177/.22 1/2"-20 Is like finding hens teeth. Ive always wanted to try 0dB, and now seems to be as good a time as any. It looks like the 110C by 0dB will work, I see the length is obviously 110mm, who knows the outside diameter... ? The Tanto is 1.22" x 5" for comparison.

DonnyFL Fatboy 2.0 with all 3 inserts and muzzle brake. A very light cosmetic mark or two from normal use as it wasn't mounted for long.

Never used the muzzle brake as I had a ltd edition version (not avail) as well, but I noticed there is a small cosmetic scratch on the face of it. Full disclosure, I thought I had received a used one but is just anodizing imperfections on interior of the male part that screws into the front of the mod. No deformation of the metal itself and not seen when used. Also, the imperfections are between the anodizing contact points. Just being honest as I inspected it after I decided to unwrap it for the picture.

Asking $190 shipped. No trades at this time. PayPal FF only. Conus shipping.

Konus Pro M30 8.5-32x52 (SFP)
- Focuses to 10 yards, has a bubble level inside of the scope tube, and a mil dot reticle. Owners manual and sunshade included. $340 $220
- Small Marks/speckling on the finish on the objective end and sunshade

Email or PM is fine. More pictures can be sent if needed. [email protected] for email inquiries.
Paypal (F&F or add 3% for fees), Zelle or USPS Money Order accepted.

Thanks for looking

Hello I was contacted by private message by somone trying to scam me into sending money f&f. I want to let people know who it is but for some reason the private message is no longer on my message center. Could I please have the help of an admin or mod? I have their email but can't find their original private message to me. Asking for an admins help please.

If your contacted and asked to email [email protected] do not give him any of your money. He tries to get you to send money f&f by saying he'll give it to you for whatever price you thibk is fair. He will give you tons of pictures but will never time stamp them or take special asked pictures like a stamp with airgundepot next to it. Total textbook f&f scam. Exactly what the classifieds rules tell you to look out for. So look out yall!

Not using this so hopefully someone else can. $120TYD any other questions feel free to ask.

Would like to swap my .22 for a .25 cal. Will post pics later. Regulated Huntsman only. Thanks

Have my R9 complete. Steve Corcoran stock really makes it pop!!

Just thought id share a few pics of my 1987 77k that ive been picking away at through the year, in my little home shop.

Now shrouded (and re blacked by a very nice gent called Paul Chell), sitting in a home made english walnut stock (with Ebony cap), running a 176gr skirtless rotating piston, and putting out 11.4fpe with both JSB 7.3's and 8.4's.




Ive added a little brass bling here and there....





....and also included a removable foresight (from an old Remi 700) so it can still be enjoyed as Herman intended....it is a 77 afterall





Thank for looking

Question and assistance asked for and appreciated.

Interested in buy a PCP, my first sporting precharged airgun (have a 10m match gun). After a lot of reading, and online window shopping, I have two choices in mind for a .22 caliber air rifle.
My uses are few: tree rats, plinking and all around good clean fun.

Choice A: Daystate Wolverine R HP (laminate or walnut stock)

Choice B: FX Crown Continuum mk2 in GRS Nordic Wolf stock


Both appeal to my visual sense in pictures, Wolverine has 50% more power I believe (30fpe vs 45fpe), Crown has two barrels and the GRS stock has cheek adjustment.

Wolverine has the cocking lever which I can switch to left handed operation (I shoot long guns left handed) with an ambidextrous stock. Crown is available in LH stock but lever is fixed on the right side of the action.

Wolverine barrel/shroud look sturdy in the event of a bump. Crown barrel/shroud looks like its’ POI could change with a small bump. This observation may not matter since I do treat my airguns with kid gloves.

Crown has external hammer/transfer port adjustments, although full power is still 30fp. Wolverine is adjustable, not with knobs. I am more of a ‘set it and forget shooter’ after I find the pellet of choice.

I like the LH GRS Nordic Wolf stock more than the ambidextrous thumb hole (and less adjustable) stock on the Wolverine.

I am leaning towards the DayState WolverineR HP since I have a hunch it will be more trouble free, although this is just a guess. No personal experience with either brand.

Which would you folks choose of the two, and why? Your input is appreciated

Includes bipod 3 mags and a hawke side winder 6.5-20x42 scope and the case gun shoots amazing holds it air no issues, have sold my fx streamline already have a few more airguns to sell this one won’t last long message if interested

$1050 OBO

Comes with all the factory accessories. $2450 TYD Sold Pending Funds

Sales Rules:

• I accept PayPal or Venmo - F&F only. Not my preference, but will also do check or USPS MO and ship once cleared.
• CONUS shipping is included in the asking price. Please allow up to 48 hours for shipping.
• I will go based on PM timestamp.
• Please - no trade offers for this sale.

Have a .22 Tanto for sale. Thread is M14x1.25.

Price: $90 SOLD

Where can I find a detailed look at the Hojimoto mods along with target shooting on a Gauntlet2 as compared to a stock one? Side by side comparison.
(Nate of the airgun channel)

Hello everyone,

My good friend @davelarson has told me how well Slugs do in windy condition when he shoots. Well I ordered some Nielsen slugs in two sizes in the .177 caliber, some 12.5gr and some 15.0gr. I shot both sizes at 25 yards and they were pretty close to being equal in accuracy. Then I moved out to 50 yards with variable wind from 10-20 and guts to 25 and the 15.0 edged out the 12.5 by a little bit. I have my big wood target frame out at 85 yards and no paper target on it at the time but I decided to shoot at it just to see how much drop from the 50 yard. I aimed at a previous hole and the Slug only dropped about 2" but was dead on in line so I shot 4 more times. I taped a Dime on the board and took this photo, needless to say that I am pleased how well these are shooting.

I have ordered a mix bag of various brands in the 15gr size to try out. I also ordered 3 different sizes from Zan and anxious to give these a try out.

ThomasT

Sales Rules:

• I accept PayPal or Venmo - F&F only. Not my preference, but will also do check or USPS MO and ship once cleared.
• CONUS shipping is included in the asking price. Please allow up to 48 hours for shipping.
• I will go based on PM timestamp.
• Please - no trade offers for this sale.

Selling two Hugget Astille mods. Both are 1/2x20UNF. Not sure if I have the boxes, but if I can find them will ship as well.

1 - Top in picture. .177.

Price $90 SOLD

2 - Bottom in picture. .22. Comes with "silenting" end cap. End cap was originally in .177 but set on lathe and bored out for .22.

Price $90 SOLD

I am needing to modify or fabricate new, a mount base for one of my slug shooters with a fairly high scope position.

* Whats needed is the how many .000" of an inch in height differential per foot or by the lineal inch equates to 20 MOA ?

** If it helps .. the base is 4 1/2" long, so how much wedge over that distance ?

Sorry to ask, but have not found the base anwser, only the math of which is not my strong suit.

Thanks !!

This was tuned by John Thomas about a year ago including a HO PG4 Vortek kit and Vortek seal. It also has piston sleeve buttons, brass pivot bushings, and a tuned trigger. It is in very good condition except for the top of the rail that shows some wear. Also, I had a Leupold QR mount professionally installed by a gunsmith which involved drilling/tapping four 8-40 holes in the top of the receiver. No functional damage at all and all of those holes can be covered by a one piece mount. Also included are the pellets shown; most tins are only about half full. I’ve put around 2-3,000 pellets through since and it’s doing between 13.5-14 fpe. Included is the original box with all its contents and an OEM Weihrauch moderator. Great shooter and the most accurate springer I’ve ever shot. It’s passed the ten dimes challenge more than once. I’m only moving because I recently picked up a PCP and my HW50 does all that I need a springer to do. 525$ TYD via F&F PP not interested in trades, PM for more pics

Now this is a real review!

Recent arrival from AoA.

It's the little guy in the middle HW30. Small in comparison with my R9 and Benji Trail NP2 yet same pull length as the R9 so "feels" full size, kind of like a Ruger 1022. Can actually cock the thing with ONE finger, crazy low cocking force. Only a few dozen pellets through it so far. Getting 720 fps with Crosman Domed 7.0gr (8.0fpe). For giggles tried a couple of 16.2gr JSB Beasts and got 440 fps/6.9 fpe. 820 fps/8.5 fpe with the 5.71gr alloy H&N FTT. Great trigger as is normal with all Weihrauchs. So far getting right around 1/2" with open sights at 10m. Much breakin needed but right out of the box a mild 'lil pussycat. Doubt I'll scope it but may put a red dot on.

This is gooooooood lol ,

It seems as if they went back to single regulator which does actually look like a plus,
really just a reshaped mk2 with a new amp reg mixed with an edgun and a prophet?

Edit: I can see this all making tons of sense for PRS , I just think theres going to be some imaginary dreaming going on of hunting animals at 300 yards now but to each their own

Apparently, FX is launching their new PRS Platform, the Panthera.
Any thoughts?

The FX Panthera is unlike any previous FX Airgun. It is a dedicated slug rifle, with precision competition in mind, pushing the boundaries of airgun performance and accelerating the FX Airguns legacy.

The Panthera includes technology displaying a generational leap-forward for an airgun. It begins with the new Dynamic Block, a new breech block designed from the ground up for performance slug shooting. The Dynamic Block utilizes a compact one-piece valve. This High-Power / Short-Impulse Valve is extremely efficient while allowing an immense and precise flow of air.

The plenum design (i.e. Dynamic Plenum) feeding the Panthera is revolutionary. It is an over-the-barrel plenum which provides a consistent regulated pressurized plenum around the barrel, adding increased rigidity to the barrel as well as allowing multiple plenum lengths to be employed to match the caliber and power of the rifle. Precise levels of pressure are maintained by the single AMP MKII Regulator. Three sizes of plenum will be utilized initially depending on length of barrel and caliber: a Micro Plenum (sub 12ft/lb rifles), Macro Plenum (62cc) & Magnum XL Plenum (156cc).



The results of the Dynamic Breech & Plenum are extraordinary. Testing has yielded constant 10-shot strings with standard deviations in the low 1.0–2.0 range and extreme spreads as low as 3-4. This ability to precisely control air flow paired with the world-class FX Superior STX barrel using premium slugs will yield competition wins, and not just in airgun competitions. .22LR precision shooters will identify the ability to shoot the same BC slugs and weights they are used to, but with the control and standard deviations that only FX Airguns can deliver.

The Panthera stock is designed for competition. It features a 14.75” long Arca rail complete with M-LOK sections and a barricade block nestled next to the breech (you can achieve an ideal balance point by adding external M-LOK compatible weights or internal FX Barrel Weights that attach under the shroud). The Panthera further fits the shooter using a fully adjustable butt stock and an adjustable cheekpiece that is also ambidextrous. The Panthera’s air source is a 300cc carbon fiber bottle attached in the rear and is filled via a rear located foster quick disconnect.



The Dynamic Block has a larger breech than previous rifles that allows projectiles up to 13mm in length. It uses the Standard Side-Shot Magazine but with a newly designed deeper lid to accommodate longer length slugs (Now called the Standard Plus Side-Shot). The FX Panthera employs the Quick Tune System (the same as found on the FX Impact M3), uses a 20MOA picatinny scope rail, comes standard with a zero-angle AR grip, and has an ambidextrous sidelever cocking handle that is reversible to the left side of the rifle. Dual angled Manometers on the left side of the block show the bottle pressure and the regulated plenum pressure.

The FX Panthera will be offered in three configurations, the Panthera 700, Panthera 600 & Panthera 500 (corresponding to barrel length). The Panthera 600 & 700 utilize the FX Superior Heavy STX barrel liner as standard as they have been purpose built for slug shooting. The Panthera 500 uses the standard FX Superior STX barrel liner that shoots both pellets and light weight slugs. The rifle allows for the quick change of barrel liners but changing calibers and affixing different barrel lengths to the Panthera can only be done by an authorized FX dealer.



Additional accessories will be offered to further customize the rifle including a bag rider, barrel weights, offset M-LOK weights, smaller profile competition Mini-Mag, Picatinny accessory sections, and an optional tungsten hammer.

The new FX Panthera will forever change the precision rifle world. It feels and shoots like a precision 22LR, enjoying straight back recoil, but with laser sharp precision and accuracy only found with an FX Airgun

Sure it has been discussed can’t find it

What chronograph?