I hate to even think about selling this one but I will list it and see if any of you lefty's have an interest.

LH Air Arms EVOL Paradigm .22 rifle. Purchased new for AOA 2-3 months ago. It is a piece of art as far as I'm concerned and it shoots amazing. I have it shooting 18.1 gr at like 850 FPS for an insane number of shots per fill, approximately 90. I think this is the 2nd LH Paradigm that hit US soil.

This gun is as MINT and MINT can be. It looks just like when I took it out of the box. I have the original box and papers. I don't have to sell it but my American Air Arms .22 mini is getting most of my shooting time.

I will take NEW PRICE of $1800.00 for it shipped to the lower 48. This doesn't include the scope or bipod. Feel free to PM me or text me at 405-664-4695 if you have any questions. It's an amazing air rifle. I have many transactions on this forum and not a single issue with any of them. Thanks.

New guy here. Looking to get a good quality pellet gun, either .25 or .30. Accuracy and durability are a must. So far the FX Impact M3 looks like my first choice? 600mm or 700mm? 700cc bottle, pre-tensioned barrel, and good mags would be my first upgrades.
What do you think?

BRK Ghost that is!



The Carbine, Plus and HiPower caters for models from 12ft/lb up to 95ft/lb outputs, each boasting 20-level main power adjustment and fast-swap interchangeable .177, .22, .25 and .30 calibre barrels. And there's even more - from butt to muzzle - making a BRK Ghost everything you want a rifle to be!

Comes with LOTS of extras. Everything in the photo minus the scope and then some!

M3
Marksman 30MOA Rail + Original Rail
KLS-3 Bag Rider + Original Butt Stock
Dual bottle adapter
X2 300bar 700cc bottles
Ergo Vert Grip + Original Grip
Carbon Fiber Sleeve
Pin Probe + Slug Power Kit
Slug Barrel + Original Barrel
Huma Slug Port + Original Dual Transfer Port
(Both barrels are their own full individual set ups)
Carbon Fiber Shroud + Original Shroud
FX Chronograph
FX Magazine + Iguana Hunter Magazine

Comes w/thousands of JSB pellets and NSA Slugs.

I’m sure I’m forgetting some things too.

2000$ + Shipping. Available for drop off or pick up if you’re in the Bay Area.

Hello new here. I have been doing some research on a PCP gun. Based on my simple requirements:

• Must be under the $1200 range.
• Must be quite enough to plink in the backyard with neighbors about 50 -75 yards on either side not very noisy. Or be suppressor friendly.
• Must have a clip magazine to house multiple shots. Do not want a single bolt action load.
• Must be very accurate between 50-75 yds
• Must be regulated
• Must be tactical looking with stock adjustments and ability to use accessories like bi-pod and scope.
• Must be able to swap barrels for diffrent ammo caliber types
• Must have removeble canister for refill

I found the FX Impact meets most if not all of these requirements. Except for my budget. What alternatives should I look at that meet or exceed these requirements. Is there anything in my budget?

So I’ve been trying to achieve consistent groups and found this pellet comparison target very telling, I have been fighting random fliers and can see some of it is defiantly pellet related. Not sure if the heavier pellets are best or the fact that they are “match“ grade.

Like new Rti prophet 2. 22 cal. Has few extras on it. K&l PRs w/bag rider saber tactical grip and oem also. SABER tactical rail -Carbon Wylie silencer. Cheek rest and 2 mags. Guns really great shooter. Tuned for 18 gr pellets at 920 ish. Shoots what few slugs I tried very well/ Gun has great shot count 1700 SHIPPED

This project has been on the table since I got this Marauder Semi-auto. As with all Marauder's with steel tubes it is a shooter but had a front heavy feel to it and did not have a good balance. Also, as with all wood stocked gun's, it had generic 14" length of pull to the butt pad. One size does fit all folks comfortably. So after figuring out the max length I needed to handle the foregrip and shoulder the gun, I went to sawing off needless material. Six inches came off the front and 1-1/4" with pad came off the back for about a pound or more of weight savings.

Chemically stripping the factory paint and poly sealer finally came out of the wood and checkering after three attempts. Time should be taken here to ensure that there isn't any sealer in the checkering or elsewhere, as it will show up upon staining and the process repeated.

It's been some time since I have done any woodworking project involving sanding, staining, and sealing so I did a lot of research first. The one thing that I keep hearing from gun stock refinishers is to get the wood sanded to a perfect scratch free surface before applying any stains or sealers. The more time that is taken here will determine the outcomes. I thought I had got it right, but did have to go over a couple of areas that scratches showed up at.

I oil-based stained it with walnut mixed with a little golden oak. Satisfied with the depth of color and contrast after multiple coats and a thurough drying, the sealer went on. There is a multitude of different types of finishes that can be used on stocks for a multitude of reasons. I finally chose Minwax polyurethane to seal the wood and keep hand and gun oils from soaking through. With poly finishes there is a coated plasticy/shiny look to it that I don't know if I like, only because the raw oil stained wood looked and felt really good.

What do you all do to keep your Yong Heng compressor from dancing across your floor during filling. I’ve had some that stay put, but this one in particular vibrates across the floor if I don’t hold it in place. Any tips are much appreciated.

As a newbie to PCP air rifles, it appears that PCP air guns are a bit more complicated to maintain in the long run due to finding the correct O-rings, etc., to replace old parts, especially if the model is no longer in production. Also, I'm sure to replace such parts on the PCP air guns; we would at least have to know what we are doing so as not to damage or break anything. To keep or to sell... ???

Need a new valve or want to replace one? Now is your chance. All in good working order with 0-rings 7//8-14 thread from MSA tanks $35 each shipped or $100 for all three. Paypal FF or Zelle DM me if interested -Only 2 left! Going fast only 1 left!

Went down to the former dairy to reconnoiter for Spring and maybe get lucky, which I did. All kills at 40 yards, 1 MIL of holdover from my 25 yard zero. All DRT.

I got out early this morning and tried 100 yards with the Bullshark shooting 10.3 Knockouts at 975 fps. I wasn't sure how well I would be able to see the bull at 100 so I went a little overboard drawing the first one. After I saw how well it did, I made a windage adjustment and tried another one. The first group is around 1.5 inches and the second is 1.25.

Hello All,
Looking to buy my.first PCP. Looking something in .22 that is compact but still carries a punch. Was between the Brocock commander xr with the folding stock which I believe in .22 makes about 28-30 foot pound energy and can be had for around $1500 or the FX impact m3 power block which I believe in .22 can make 60 foot pound energy and can be had for around $2000. Above power I am putting long term reliability and problem free use and obviously accuracy. Any advice? The gun would be used for hunting mostly (,iguana, pigeons etc).

Hello AGN,

As I’ve begun to get more and more invested in the engineering and repair of PCPs I’ve run into a problem multiple times. I needed tools or hardware I didn’t already own. (The only thing I already had was a rechargeable power drill and bit kit).

First time it was a torque screwdriver…
Next it was metric hex keys…
Shortly after a Tipton gun vise…
Followed by silicon oil, silicon grease, and graphite powder…
Then it was a Dewey rod with attachments and jb compound…
Then a borescope…
Now it’s a bottle degasser…

So my question is-

In relation to maintaining, repairing and cleaning. What are the items you keep on your bench or in your toolbox? Looking to get ahead of the potential requirements! As always, thank you in advance!

Up for sale is a Falcon FN8 pistol in .22 caliber. Comes with two mags, original mag loading tool (not needed, but cool), Falcon quick fill mod (a unicorn) and fill probe. Also included is a Falcon LW8 carbine stock. Also included and another hard to find item is a B-Square 3-9x40 AO compact scope. The pistol shows normal wear and the stock has one decent ding. Shooting at 12fpe and has held air for years.

The bad... The original Falcon safety button is missing It's not used with the carbine stock and I lost it. One could be easily made by a machinist. I had this gun configured as a carbine for years and I simply lost it. If I ever find it, it will go to the buyer.

I will need $650 $600 shipped for this one. No trades. PP or MO

A buddy already had the top just laying out in his yard and said if I can get it in the truck I could have it.

About $20 in cinder blocks, a couple tubes of construction adhesive and the help of a neighbor to place the top.

The funny thing is the wife didn’t even blink when I told her what I was doing.


Will at some point paint/seal it. And recommendations on a paint/sealer that will withstand the direct Southern California sun? It destroys everything out here in the desert.

Pristine Weihrauch HW95 Luxus. Caliber - .177, Stock - hardwood, Weight - 7.5lbs, Rail - dovetail, Trigger - 14oz, Fps - 877, Fpe - 14.3, Pellet - Air Arms 8.4,
Scope brand & model - Hawke Airmax, Specs - 4-12x40 SFP, Dia - 1", Legnth - 13", Weight - 21.9oz, Rings - Westhunter height adjustable, Caps - bikini caps.
Includes original sights and owners manual.
Shipped double boxed in original manufacturers box.

$500 shipped!
PayPal FF please

SOLD, PENDING PAYMENT.
FX IMPACT MKII SNIPER .22 700mm barrel. Includes factory hard case, two magazines, two Speed Dial speed loaders, Saber Tactical extended pic rail under bottle and factory short rail, Donny FL moderator, Ergo vertical grip and FX factory grip, manual, Huma single shot loader.
Scope and rings in picture are not included.

I have about half a tin of pellets through it. I thought I was going to go hog wild with tinkering with this Impact and bought it and a lot of accessories for it but am switching gears to try out field trials with a different gun, can’t justify both so want to sell.

Gun is in perfect condition, still at original factory settings.

PayPal price $1200+ shipping.
Personal check or USPS Money Order price $1000+ shipping.
For those afraid to take a chance on a sale without PP or all their finances tied up there. I have an excellent rating on AGN and accurate shooter.com forum under same screen name as here. I have sold well over ten thousand dollars of guns and equipment on accurate shooter. I have been a special deputy on my counties sheriff department for 18 years. There is nothing on earth that would make me compromise my good name or reputation.
Not interested in any trading.
Can provide any additional photos upon request.
Randy

I have aea challdger 357/ 9mm for trade it comes with a bunch of ammo near 700 slugs don't like bullpup possibly will trade for night vison like atnor any air guns

Hello all,

I have been a powder burner for years but recently got Introduced to pcp guns. I bought a hatsan flash qe .25 and it was a fun starter pcp but lacked build quality and accuracy. It’s now time to get something a little nicer and really jump head first into this pcp thing. The two guns that keep catching my eye are the fx crown and maverick. Both have amazing reviews but ultimately seem to serve a different purpose. My goal is pest and vermin control along with muscle memory practice for powder session. What are you experiences and stories about these two rifles along with perfected calibers. Also, is there any other guns in that price point you might recommend and what compressors do you prefer using. I currently use a hand pump but that has to change asap lol!

I appreciate all the help and look forward to getting more involved in this community!

[No trade offers on this listing please...]

Hello AGN,

I'm looking to sell a very nice FX Impact M3 Bronze, custom high capacity magazine, HUMA slug pin probe, WIKA air gauges, carbon fiber liner sleeve, stainless steel bolts, owner's manual and factory FX hard case. This rifle is currently set up as the Compact configuration with the 0.177 caliber 500mm barrel with Superior liner w/ bonded carbon fiber liner sleeve and 300cc bottle. It is currently set up to shoot ZAN 13g at ~930-940fps (reg 1=130bar, reg 2=100, power wheel=8, micro=3, valve=4 bars) with great results. I will include a full bag (400 slugs) of the ZAN 13g slugs with the rifle. The rifle itself was recently resealed by FX and is in excellent condition as shown in the photos; the cheek rest and shroud have been carefully wrapped in an automotive grade carbon fiber vinyl wrap (which can be easily removed without any residue if you don't want it).

This beautiful M3 comes with the following upgrades / extras:

• Carbon fiber liner sleeve (epoxied onto the Superior liner)
• HUMA slug pin probe
• 3x WIKA/FX air gauges w/ black faces
• Custom 3D printed 0.177 high capacity magazine
• Stainless steel bolt kit (already installed; original blacks screws will be included)
• Carbon fiber wrap on cheek rest and shroud
• 400 ZAN 0.177 13g slugs

PLEASE NOTE: scope and mounts are NOT included in the purchase price...

Price is: $1700 + 1/2 actual shipping for the 0.177 x 500mm/300cc Compact configuration

Local pickup is available in the SF Bay Area - otherwise, payment by Paypal Friends & Family is preferred (or add 3.5% if using PP Goods & Services). I have plenty of feedback both here as well as dating back to the old Yellow Forum so please feel free to do your due diligence and know that you're dealing with a reputable trader.

Selling an FX Impact X in .30 cal. The gun has a 700mm barrel and a power plenum has been added. I have a Vector Veyron 4x16x44 FFP scope mounted on the gun now. No problems with the gun or the scope. I went out earlier and shot a full clip @60 yds. Speed @ about 900fps. with 44 grn. JSB pellets. Price for the gun and scope combo is $1450.00 or gun by itself $1250.00. These prices include shipping in consus. Thanks for looking.

So I want to get 2 things. One that has to do with airguns and what that doesnt and im not new new but im semi new to both worlds haha. I want to be able to use a Nail gun to make stuff (im having a lot of fun learnign about carpentry lately since I found out im dislexic and not just mentally challenged when it comes to building things.) SOOO now that I know how to compensate or im learning tinkering has become sooooo much easier in all aspects of my life. ANYWAY I wasn't sure if I get a tank or compressor hook up for a nail gun can it work to fill Airgun bottles. I do have a Scuba HPA (can't remember the term someone gave me a link on here for a bigger refil bottle) type tank just curious what I cna use to refill that and if I can use this compressor for both applicatons or if anyone has suggestions. IF THEY ARE TOTALLY DIFFERENT TYPE SET UPS please only laugh at me a little bit hahahaha.

Selling a cricket mini carbine, one mag included that was the only one that came in tha box .. shipped 3 day priority.. no bag or scope, or scope mounts included .. $1, 250.