Hi everyone,
I'm hoping someone can help me out. I'm in the process of tuning my FX Crown and I've already achieved an extreme spread of 5–8 fps with a velocity around 875–880 fps.
When testing accuracy at 75 meters, I get good 3–4 shot groups that can be covered with a thumb. But on the 5th or 6th shot, the POI shifts, and I get another group just as tight, but in a different spot on the target.

I'm shooting .22 caliber with the 700 mm Superlight barrel. Regulator is set at 78 bar.
Outside temperature is high, around 38°C.

I don't know if it could be me, parallax not properly set, the temperature, the moderator... or barrel harmonics.

Thanks and cheers to all!

Silver Gen 1 Impact .30 600mm
Huma Reg
M4 Power Block & 750 Power Plenum
Kraford & Lypt compact arca rail
AirMarksman digital gauge
Tungsten Hammer
Will have 480cc bottle not 300
I am sure I am missing something, $1400 shipped
scope/mod not included
or will trade for wildcat compact bt

HIGH TO LOW EXTERNAL REG 499.99. If you shoot on the bench this is a great setup for a condor, texan or any other sytem in place. Simply the best way to shoot teathered.


5000 PSI down to super low PSI external Reg with case a great deal. Sorry Solid Price No Trades, I only take paypal.

270 FX .25 cal hybrid slugs
202 NSA .25-29.5 gr slugs


$50.00 plus shipping in ConUS

I'm selling my .22 Nova Freedom PCP/Pump air rifle for $150 shipped (CONUS). It has less than 100 rounds through it and is in very good condition. I haven't used it in a few years so I function tested it (it holds air and it works). Comes with air rifle, original box, paperwork, and all original accessories. You can read a review here: https://hardairmagazine.com/reviews/american-tactical-nova-freedom-pcp-air-rifle-review-22-caliber/ I will post pics when I get home later today.

Beautiful and accurate. FX Wildcat MKIII VP Bottle .22 cal. Slug power kit installed by Utah Airguns, Kuiu Vias hydro dipped stock, Sabre Tactical bottle clamp adapter with pica tinny rail. 2 magazine & ODb moderator included. . Crimson Trace FFP 6-24x56 MOA scope. Will ship in original box. Bipod is not included $1700 + shipping.
email: [email protected]

Got a Snowpeak SP500 pistol to try darts, the only .22 darts I could find are these Milbro Black 0.222. It does 4 fpe with 14.3 grain CPHP at 355 fps.

These are about 21.2 grain, I average 50fps or 0.12 FPE with them. The package says they are mild steel. After shooting I see no rifling marks and they pull out by hand very easy. Heres a 20 shot group at about 8 feet. I ran out of travel so I want to get a longer elevation screw and stretch or replace elevation spring.

I know the price difference is almost $200, but deciding which one to get, I do like the digital layout of the AEA but from videos it looks like it vibrates badly. The GX seems proven and good value for the money. Thoughts?

https://gxpumpofficial.com/products...ous-work-12v-auto-stop?variant=43490052866219

https://www.thepelletshop.com/colle.../products/aea-480-bar-7000-psi-air-compressor

looking for the best grease to use ? i want to clean old dry grease and re-lube a old pistol . Preferably a small tube .
Thanks
Stan in KY .

( thanks for the move , just never thought of grease as an Accessory)

I have a silver gen 1 impact .30, 600mm fully upgraded with huma reg, tungsten hammer, power block and m4 750 plenum. Will have 480cc bottle not 300

Looking to trade for a carbine setup .25 or .22 GK1 or a Wildcat Compact BT in .22 or .30.

Scope and mod are not included with impact. I can provide more photos if interested, thank you!

WTS: Huben GK1 V1 .22 - COMPLETE SETUP - $1100

Price: $1100 shipped CONUS.
Payment: Venmo, Zelle, PayPal (if G&S add $25.00 to cover fees)
Email: [email protected]

Price includes everything below:
- Huben GK1 V1 .22 pistol with all original factory parts plus many add-ons.
- Impulse Air 1200 .22 moderator.
- Buck Rail Huben GK1 Stock Adapter (installed)
- Strike Dual Folding Stock (purchased from Buck Rail).
- GK1 Custom Shroud Adapter with thread cover (purchased from Kraz Cool)
- GK1 Mag Release Extra Spares
- GK1 Advanced Loading Gate (installed).
- GK1 Advanced Loading Gate from Kelly at Kraz Cool.
- GK1 Original Loading Gate
- (2) Original fill probes.
- (2) Fill Port Protectors.
- Original assorted hex keys and o-rings.
- Owner's Manual
- Original GK1 Pistol Hard Case and shipping carton.

Note1: Holosun HS507K 2MOA Red Dot is not included, but additional $175 if want to purchase.
Note2: Subtract $100 if moderator not needed.

I purchased this Huben GK1 V1 .22 pistol new from Kelly Schmidt at Kraz Cool Airguns in 2023. It functions flawlessly and has all original factory parts plus many add-ons. Specifically, I've installed the Buck Rail GK1 Stock Adapter (needed for folding stock), and GK1 Advanced Loading Gate (from AGN member MOistone). The GK1 is in excellent condition, very accurate, and a joy to shoot!

Strike Dual Folding Stock folds left/right and has QD for easy removal/reinstall... Very nice!

I want to sell all accessories together as a complete package if possible. It's a very good price. I also don't want to remove the Buck Rail Stock Adapter need for Folding Stock. But, will consider other options if necessary.

If interested PM me, or email me at: [email protected].

Hello to all,

Back in 1986 I had a booth at the Shot Show in Las Vegas, I was taking a break and walking the floor looking at what was available and came across a booth that was representing BSA Air Rifles. BSA has a much storied history; ( Birmingham Small Arms, England) they have manufactured Firearms, Air Rifles, Motorcycles, bicycles and even an automobile. They are probably best known for their BSA Motorcycles, a very popular line of Motorcycle’s both there and abroad.

There was an Air Rifle on a table at this booth that caught my eye, it was labeled, “BSA Supersport Magnum” It was a barrel cocking Rifle available in both .177 and .22 caliber, the velocity claim on the .22 caliber was 750 fps!! It was a very sleek looking rifle, OAL, 39”, WEIGHT 6.5 LBS, adjustable rear sight, barrel mounted , fixed front, rubber butt pad, safety was a lever on the right at the rear next to the tube. Also had a scope rail, the guys at the table said it was a Maxi Grip scope rail; that the scope rail was mounted on rubber strips, and would help eliminate scope slippage? The Cocking effort was about 30+lbs.

Anyhow I liked the rifle and vowed to look more into it after the show. In 1988 I was browsing thru my latest Shotgun News and saw an ad for the “BSA Supersport” from a company called “Precision Sales International Inc”. I placed an order for the .22 caliber. At some time BSA became a subsidiary of “Gamo” in Spain, I don’t know anything other than that, and really am not interested, will leave that to someone else to sort out, I am only interested in the product!! I have read that the DS prefix on the serial number of this rifle indicates 1986 production?

The “Supersport” was kept in my shop for pest control and plinking, it was light, handled well and was accurate, I did try a scope on it and a red dot sight neither was to my liking, they in my view took away from the ease of handling and quick sight picture I wanted with this rifle, although I may reconsider soon at my age now!! Back in that time frame I was pretty busy in my shop and did not have much time to devote to air guns, I think it was in late 1999 when I set out to finally determine the pellet for the BSA Supersport, I had just mostly used Crosman .22 caliber which was good for about 1 -1/4 inch groups at 25 yards open sights.

After trying out a myriad of pellets I found three that displayed the most potential and were consistent accuracy wise with this rifle; RWS 14 grain. Match, RWS 11.9 grain Hobby and H&N HP, 12.65 grains The RWS 14 gr. Match delivered 697 fps. /15.1 ft. lbs. The RWS Hobby 11.9 grain delivered 760 fps. / 15.3 ft. lbs. and the H&N HP 12.65 gr. delivered 743 fps / 15.5 ft. lbs. All three of these pellets will deliver ¾ to 1 inch groups at 25 yards @ 15 + ft.lbs at the muzzle, a real “Thumper”, no it’s not a target rifle but it is ,in my view, more than adequate for my intended use! The RWS 14 grain Match always exhibited the most concentric group patterns and is the pellet I chose for this rifle. These rifles have hammer forged barrels and are quite good!!

I have thru the intervening years replaced the Mainspring and Piston seal twice, along with the breech seal, but other than that it remains as I purchased it some 30 + years ago; it still hangs out in my shop to this day, I call it my “Work Horse”!!

While on the subject of BSA, I also have a copy of a 1920s BSA break barrel Air Rifle made, as best I have been able to determine, by the Japanese in the early 1950s/60s, it has an engraving on top of the rear tube stating “Trade Mark” along with “Champion” and a serial # 268 in several places. I will enclose some photos, may put up a little something on it in the future, really a fun little Air rifle!!

Garey

In really good condition

Functions great with no issues

1 magazine

Includes aftermarket moderator adapter and original moderator.

Original box and test sheets included.

Owner has a paradign which is the wood stock version he likes more so he is selling this one.

Clayton Horn
[email protected]
541-647-3971
Text ok

Looking to trade/sale my m3 in .22 standard
I purchased new thinking it would be ok me being a lefty but the magazine totally bugged me so I purchased the lefty kit and 2 Orion magazines but during the install I stripped one of the power block holes.I purchased a allen screw from home depot that snugged up and seems fine.I purchased a new power block and screw set from a fx dealer but there's no way I'm doing another install, that will be up to new owner.i have only put a tin or less through the m3 since new .the picture with the allen wrench is pointing to the stripped hole that has the screw from home depot in it.
No scope,or mounts or bipod included but can be negotiated .
Price 1500$ shipped paypal ff or add $ for fees.

Lower 48 on shipping
I live in Knoxville Tennessee and would travel an hour maybe 2 for a meet up to trade.
you must have equal to or better feedback for me to ship same time on a trade deal if not you ship first.
trades im interested in
1 uragan 2 .22 laminates
2 edgun rm5. 22 long laminates
3 edgun layla 2.0. 22 laminates
4 taipan veteran 2 tatical 1 piece laminate stock in .22 anti double feed model preferred but not mandatory if nice enough
5 kalibrgun argus 60 .22 laminate
6 Possible partial trade on a war warp
Hit me up if it's nice and laminate ill take a look.
If you want additional pictures of certain areas just let me know.
Thanks for looking

I was informed by a nice member here that what I thought was a power block actually is not and after checking into it ,it's more like the block from the early m3 runs before the power block came out.The fx dealer sent me out the wrong block.My m3 is a power block model so I'm in the process of rounding up a correct power block before putting back up for trade.

Athlon #214514 - HERAS SPR 15-60X56 BLR2 SFP MOA

Just got this scope a month or so ago but the reticle is too fine for my old eyes.

Snaps in / out of focus really good for FT but I was having problems in the dark shadows.
Just a personal problem, not a fault with the scope.
Asking $500, includes shipping.
I don't support PayPal, so USPO Money Order, Bank cashiers check, or personal check (held till funds clear).

Anyone have a Allen Z fill adapter for a theoben the can send me some pictures of how it is set up. The one I made is having some issues.

I bought a pre-owned HW95 walnut in .177 cal from AOA. When it came in, it looked brand new and not a mark on it. AOA test sheet showed velocity of 888 fps with JSB 8.4 gr pellets. Boy, was it twangy. I replaced the innards with a Vortek PG4 HO kit and before in put it in, I cut one coil off the spring figuring it would make it a little smoother. Velocity then jumped to 927 fps. The twang was gone but the shot cycle was really snappy. Accuracy improved too, but I kept getting a flyer every 10 or 15 shots. Still not satisfied, I replaced the HO spring with a 12 fpe spring from Tom at Vortek. Now, it's shooting 8.4 AA pellets at 840 fps for 13.2 fpe and 762 fps with JSB 10.3 gr at 13.0 fpe. The shot cycle is much smoother and the cocking effort is just right for my 85 year old carcass. I guess the power level is about what an HW50 is. I really like it here. Accuracy is top notch and I've decided this rifle is a keeper.

Click the link : Video of the situation

It speaks for itself.

I need a long skinny mod for my impact. It has a zero db currently, but i want it more quiet. I have a donnyfl Koi in .177-.22. The hole is .300 on both ends. Anyone have experience using one this tight?

Greetings All,

I recently purchased a .22 cal Umarex Zelos for my grandson. I think I have a handle on which scope I want to buy but do not have the compressor/SCBA tank figured out.

My thought was to buy a SCBA tank and a compressor to fill up the tank. Also, I'm looking at buying smaller tank for portability.

Any advice would be much appreciated! Thanks in advance.



R/



John

.25 FX Panthera with 600mm barrel, 2 magazines, single shot loader, bag rider, hard case and carbon fiber bipod. 5 new packages (100 pieces) of Altaros 50 grain slugs and one new package of Altaros 60 grain slugs. 1 opened package of each. Tuned by Utah Airguns. $1400 + shipping.

If i reduce the power (say 11 FPE ) can the sled be adjuster accordingly ?

Hello, I have a nearly brand spanking new LCS-SK19 in .22 caliber. I found a dealer that still had some that had been removed from the website but were brand new, in the box. It shoots flawlessly. Zero issues. I guess I'm just not a semi auto guy. And, I'm really not a full auto guy. Is it super cool, YES! But, bench rest targets is really more my speed. It only has one tin of JSB 18.13 pellets through it. This is the FX barrel version. So, if you want to shoot pellets use the Superior liner. That is what's in it. But, if your a slug guy you can use the Superior Heavy liner. It has a 600mm FX Superior on it now and it does well with JSB's. It is full auto and semi auto selectable and does both very well. I call it a custom simply because I custom fit a really nice grip for it and had a bottle sleeve, and custom barrel band made specifically for it. It has a new Donnyfl Sumo mod and a new Arken LH-4 6-24x50mm FFP Illuminated scope. I have fitted the scope with a Ultra-lite Razor Claw one piece scope mount to shave some weight. It has a nice pic rail under the bottle and it will come with a new UTG Recon 360 bipod. The bottle is a 580cc 300 bar. And, it will do around 4 full mags on a full fill. It has the capabilities of being hypersonic but can also be turned way down to increase shot count. I'm asking $2,000 plus shipping per location for everything that is in the picture. PayPal is preferred. Goods and Services is also no problem if my feedback stats don't satisfy my honest salesmanship. But, you will need to pay the selling fee. You can PM me here or reach out by call/text to Brett Williams (870) 450-8479 with any questions of purchase information. Thanks for looking. Safe shooting

Do you like to have for your PCP air rifle?

Loading pellet mags is a bit tedious at the range. I've got five mags for my brand new Marauder. I'm thinking of getting five more... and loading them at home before going to the range.