I’ve been trying to get my .25 Skout shooting pellets well at 100Y since November, mostly shooting .25 Heavy JSB, FX, Daystate Rangemaster, and JTS. While my groups and scores have been reasonably good, I just kept feeling that I needed more to be competitive at the highest levels for 100Y BR pellet.

I decided to change caliber to .30 and shoot the JSB Exact 44.75 grain pellets. So I swapped out the barrel and probe, then tuned the gun for about 870 fps.

This is typical of what I saw this past Saturday. I still need to shoot more to verify it’s not a one off thing, but I’m hoping I can continue 10 shot groups at 100Y like the below (other groups were similar, especially vertical spread).

What has me the most excited is the vertical spread of approx 1/2 inch, which would easily keep all ten shots in the 10 ring of an EBR/RMAC target with correct wind calls. The stats are also very good with ES of 5 fps and SD of 1.4 fps. We’ll see how it goes over the next couple of weekends prior to the Oregon event.

This is a ridiculously tight, low round count cream puff that I purchased from the original owner. It has very minor signs of use. It has been completely rebuilt with genuine Feinwerkbau buffers, seal and spring on 1/7/2024 and is not broken in with perhaps 50 pellets fired. The original buffers were as good as new and were replaced based on age. It is a later dual spring model and a Beeman import. I have bought, rebuilt and sold 6 of these over the last few years and you just don’t find them this tight. $650 you pay shipping. Paypal F&F or you pay fees.

I have a great shape Huben Titanium handpump, can handpump my PROD to full in 20 seconds.

These are $400 new I am asking $195 shipped anywhere in the lower 48, can get pics if necessary but it is in really good shape. If you know what youre looking at, you know this is a good deal.

Venmo or Zelle only, paypal sucks and my feedback doesn't.

Looking for one of these. Prefer synthetic

I dont know if this is something to fuss around about, but compared to 2 other brands i have theese looks dirty and has some ressidue left in the HP ? This is just the first one i took out of the box.

Sold

I'm up too 800 fps with no porting thanks to C88 and his FX barrel!

0.159" center to center 20 shot group.

Got a chance to shoot a new RAW TM1000x .177 today at my local range.

Pretty windy, and my 50-100Y sight-in range was crowded.

RAW TM1000x .177 with Nutmeg brown laminate stock
Sightron 36X Fixed 2FP
No moderator
Pellet: JSB 16.2g
Velocity - varied, as I adjusted HST several times
Randolph Front mechanical rest
Rear Protektor bag
Distance: 30y and 40y

Very pleased with first outing. Shot about 175-200 pellets, and no recoil at all. My first .177 and the breech area is very generous for single load.

Velocity started out at 895-904 average FPS. Martin had great luck in Tn at 870 FPS at 55yards. A ragged hole group and now I need to find the right velocity for optimum accuracy. I may need to clean the barrel, as group #’s 4 and 5 opened up at 40Y at the end of my session.

I brought the gun to bed last night to sleep next to me, and I then was promptly shown the couch!

Tom

Some pics of my setup.

25 shot group at 50 in light to medium wind. Thomas Slug gun and 38gr slugs.

Added another 25 for 50 total and messed it up a little.

Group measured .361" outside to outside at widest part. Around .26 moa. Very pleased

Mike

Crown MKII, Saber Tactical stock, Donny FL moderator, 600mm .22 cal barrel. 380mm .177 cal barrel, Fat Bastard rear grip, 2each 22 cal magazines, 1 each .177 cal magazine.
asking $1400 for the set up buyer pays shipping. Here are some pictures , scope not included can be added for $2k for scope. I am original owner I bought new just don't shoot anymore.

View attachment 449273

View attachment 449274

View attachment 449275

Getting this ErgoAir Fox Bat grip to fit the Rapid Air Worx HM1000x was a bit of a challenge, but it’s on there now! Scandinavian Arms bipod for support

Well it says Marauder on the side. Scott built 3 of these special gen 1 jewels. There’s a story behind each one. When I was lucky enough to get this one he told me he built it to keep the $2000 guns honest. I’m sure Frank and Scott will be along in a while and hopefully elaborate on the subject.

I’d like to sell my WAR Flex package. I’m ready to get out of this sport. I have a ton of ammo and PCP accessories to go along with it for the right price. Gun is in great condition with a custom burnt bronze cerakote. It is not very quiet, but we can discuss that further. It’s really hard to place a value on this kit. I’m thinking $1200 for the gun and barrel kits. Accessories would be extra. The gun is pictured in its .22 configuration.

WAR Flex
Cothran Powerhouse Valve
24” .22 barrel
17” .25 barrel
24” .357 barrel
One mag for each caliber with probe
Extra WAR valve, missing valve spring
Barrel tension nut for each caliber
3 barrel shrouds

Pm me for more details.

Like new Safe queen with no signs of use worth mentioning. Right hand Zebrawood target grips, trigger shoe and muzzle break. Available with the as new pictured Hawke red dot for $250 or $180 without red dot. Plus actual shipping. PayPal F&F or you pay fees.

I have an EdGun Matador R5M Long in .25cal. It's in Like New Conditon and holds air with zero leaks. Huma Regulator, and wika analog gauge upgrades.

Package includes the following:
-EdGun Matador R5M Long. 25cal with tactical stock
-Donny FL Shogun moderator and Adapter
-Green Laminated Stock
-3 Magazine's
- 1 Fill probe

Scope IS NOT included.

$1500 Shipped and insured Goods and services. Not looking for trades unless it's Asic Crypto Miners.

I have a Diana Airking Laminate in 22
Rifle hasn’t been shot very much.
There is a small mark on the barrel and on the stock. I do not have the original plastic front sight.

$450 shipped

Element 34mm high fde
Eagle vision 34mm
Utg pro 30mm
Utg pro 34mm
The Hawke rings
Athlon rings
NOT PICTURED (BUT INCLUDING A FACTORY PICTURE) are 30mm nightforce medium rings

I would sell the whole lot for $250 SHIPPED (if you inquired at the $300 dollar price point , you can still pay the $300 ) if someone wanted to take them all off my hands otherwise I'd have to go to individual fair pricing WHICH IS NOT GOING TO BE DISCOUNTED SO HIGH

Between the NF , element, utg and the eagle vision rings I think there's over $600 there lol

There are shops that claim that they test every rifle before it leaves their store.
So I wonder if they are cleaning every barrel before the test, or if they are just shooting through the grease?
I never hear anything about them cleaning the barrel before they test the rifle, just the claim that they test every rifle.
I’m not complaining about it, just wondering about it since it seems weird to test a rifle without cleaning the barrel.
Does anyone else wonder about this?

Have not had the rifle out in several months. When I took it out of the case yesterday I was surprised to find the bottle empty. Tried to refill it it but the air was leaking out. Thought it might be the bottle O- ring so I swapped it out for a new one. That did not fix it. I know the leak is somewhere around the fill nozzle. Anyone else had this problem? What did you do?

Hi,

I have just received a 0.36L CF bottle to upgrade the small AEA HP SS tube.
First of all the seller lied and while he told me that all the bottles were made
during the past 30 days, the CF bottle had a manufacture date of 06 - 2023.
Already nine months old and the re testing period is 3 years.
https://www.aliexpress.com/item/1005006221649697.html

Anyway, I have inspected the inside of the bottle with a small camera and you
can see the video at the link below:


I am no expert in CF bottles and this is my first one, but I would like to ask you
if this looks normal? The inside surface is very rough and there is some
black stuff/residue inside as well. Carbon fibers? Not sure. On the outside
everything looks fine as well as the threads.

Any comments?
Thanks.

Looking for a FX Crown Mk II .22 cal 600mm preferably tuned for shooting 25 + or - grain slugs or pellets. Not interested in problem childs.

Having some fun always wanted to have a 20 caliber TX200. My friend Mark and I continually hype each other up for projects like this

I have machined the .20 LW blank to be a length of roughly 11.75" and am using a Carbon Fiber Shroud.

It will have a magnetic latch, I have to chop the underlever and rethread it for the end plug. Either that or chop it and ream out the arm for 10mm to insert the magnet directly in the lever, but I believe I'd prefer the adjustable end plug for fine tuning the magnet.

It currently is at 10.5fpe w/ 13.7gr JSB, the spring kit installed is a weak old Vortek kit that I'll be replacing w/ a new spring from Tom soon or maybe I can dig one up in my stash.

Anyways, here are a few pictures of the journey.

WTB: Taipan Veteran Shorty .25 caliber. You may e mail me direct at [email protected]

Over the years I’ve used a lot of different barrel cleaners… and nothing quite compares to the Patch Worm

Haven't really been following airguns much anymore. Shoot my Evol Mini and Notos quite often still but still might want a small bullpup. Kinda miss my Taipan Shorty as it was a fun little gun. Not sure if there's anything new coming out with Shot Show and IWA being recent? My guess would probably be nothing but maybe I missed something.