So I got an adapter and a Suppressor from Buck Rail. At first I was disappointed. I was getting erratic Pellets all over the target. I was using power 3 to keep things Quiet. I took it off, and the groups came back again. So I then started thinking about it and told myself to try Higher power. So on Power #4 I achieved Minute of Squirrel Accuracy! 30 yards with the JTS 18.1’s. I had run out of the CHP’s, so I will try some groups when I get more. The Buck Rail crew was very helpful. Shipping and communication was excellent! Thanks “Chris”!

I have a avenger in .177 cal and the POI keeps shifting on me. After the rifle has sat for a couple of days the POI has shifted down about 1 inch at 30 yds. I can zero it and it will shoot just fine. If I let the rifle sit for a couple of hours the POI will move up about an inch. I have used 2 different scopes with different mounts with the same problem. What can I do to fix this problem???

Thanks
Mike

Is this air compressor good for the altaros booster pump I'm filling a 45min scba tank and a small guppy tank I'm not insanely worried on fill times

Last time I shot it it shot fine. Sold as is. I will include a umarax pistol free with purchase. $70 shipped for both. PM or [email protected] if interested.

Yes the outie wounds are through shot beast little gun.

My pics don't seem to be showing it well, but my new-to-me Crosman has a lot of scuffs & scratches on the plastic stock. I've never tried to fix/restore a plastic stock before. Any advice or link to a how-to?

This is a very special little compact Mutant. The barrel in this thing is EXCELLENT! It shoots everything from 16gn JSBs / Hades up to 34gn slugs lights out.

It has a custom valve and hammer system, the valve is also compatible with the Taipan Veteran. Cocking lever is also reversible.

Efficiency & versatility - I had it shooting JSB Monster RDs at 937FPS over the winter (very easy to tune) with an ES of 1, but I re-tuned it for JSB Hades with it's monster shot count. The shot count really shines with 16gn ammo (JSB Hades, Jumbos, H&N, etc), and I've been able to get over 200 shots per fill at 12FPE (>150 shots at 15FPE, and 64 shots at 25.5FPE). I was able to shoot the Monsters and 25gn H&N slugs around 50FPE around 190bar, but the custom hammer system can work the valve at higher pressure if that's your thing.

These Mutants use 12-shot mags vs. 10 in the Veterans. There's nothing quite like these Ukranian-made Mutants. You get the impression / feeling like they were hand-built by someone who cared!

Durability & reliability - It's also one of the most durable bullpups that I've ever seen. It would make for a perfect truck gun, barn gun, and / or for all around field use. You can't really mess up the barrel since it actually stops under the forward barrel support and the factory moderator threads and sleeves over it under the support.

I've taken over 100 squirrels with it and about twice that in starlings and sparrows. These Taipans are very reliable and I serviced the rifle recently (5/25/2024) using high quality o-rings with proper grease. It should stay sealed for many (many) years to come.


Modifications and included components:

• Custom indestructible, industrial strength valve system (tested with reg wide open at 250bar with a sledgehammer hammer system)
• Bored out / tapered the block porting
• Custom grade 5 titanium lever handle with dual 1/4" set screws
• Custom 3-piece \hammer spring tension (HST) adjustment knob - marine brass with brass and Delrin preload / spring guide bushings + heavy hammer weight and heavy custom spring (needed for >170bar tuning)
• DonnyFL HST with custom spring and Delrin spring seat (for <170bar tunes)
• Huma regulator (springs max at ~195bar)
• Magpul MOE bipod / accessory rail, screws are threaded into the rifle and affixed with embedded T-nuts (very strong, screws and rail are removable)
• (2) 12-shot factory magazines
• (1) factory single shot tray / SST
• Assortment of custom hammer springs
• 1/2"-20 UNF thread for moderator attachment - not really needed, but it's there anyway!
• (1) magazine holder
• Upgraded Wika gauge
• Original packaging

Optional:

• Nylon padded carrying case with two side zipper pockets from EDgun (add $45)
• (2) additional 12-shot factory magazines: $40/ea
• I have an optional Taipan factory aluminum mag holder set that holds (8) mags, but I also made some custom threaded Delrin attachments that allows you to run a single (4) mag holder to minimize weight: $80

Terms:

• $1250 + 1/2 shipping CONUS (no Chicago or NJ). Zelle preferred
• No trades

I see thread after thread. And video after video of people with rifles like AA and Weihrauch, etc.
where they spend a premium on these rifles that shoot 25+ FPE. Then turn around and spend time and money to cut the power in half or more. All in the name of stacking pellets?

Seriously these guns shoot great without choking them to death power wise.


For me. I’d rather shoot dime size groups at 25 yards @ full power than shoot a 1/4in group at 1/2 power.

But maybe it’s because I don’t compete in target shooting. I practice shooting, I hunt, I pest, I plink.
A 1500.00 12fpe serves no useful purpose in my mind.

This is not an attack on springers. It’s my personal problem with lack of understanding.
Where I see most other shooters tend to tune for more power, more efficiency, and more accuracy.

Don’t hate me. I just want to know

Just some suggestions for new gun owners aside from the obvious safety rules. I always inspect the gun for nicks, scratches dings and dents, I don't want a dealer by chance sending me a gun someone sent back or a shipper damaging it. Next thing I do is check all fasteners/screws ETC to make sure nothing is loose. Then I clean the entire gun specially the barrel as they generally arrive filthy. From there, (PCPs) I check the gauges and top off the air wait an hour or so and mark or write down the pressure on a piece of blue tape, stick it on the stock and put it in the safe to be checked the next day. What else do ya'll do with your new guns before you shoot them?

Sales Rules:

• I accept PayPal or Venmo - F&F only. Not my preference, but if we've done prior transactions I will accept check or USPS MO.
• CONUS shipping is included in the asking price.
• I go based on PM timestamp.
• Please - no trade offers for this sale.

I have a solid reputation on AGN as an excellent seller and buyer. Can provide member references upon request.

Selling off some extra ammo I've collected over the past few years. I have way more than I need and I'm letting these go for a good deal.

***SHIPPING IS INCLUDED IN PRICE***
Pellets will be well packaged using Pyramyd Air foam rings where possible.

There's a lot of pellets here so be specific in your PM which number lot(s) you want.

2) JSB .22 15.89gr - 10 brand new tins packed in sleeves of 5. PRICE: $120 SOLD




6) H&N .22 Barracuda 18gr - 10 tins, 2 sealed sleeves of 5 tins each. Price: $50 SOLD


7) H&N .22 Barracuda 18gr - 8 new sealed tins. Price: $40 SOLD


8) H&N .22 Barracuda 18gr - 17 new sealed tins. Price: $90 SOLD



***BELOW THIS LINE ARE SOLD***
1) JSB 10.34gr - 6 new tins. All from the same sleeve of 10 tins. PRICE: $65 SOLD

3) JSB .22 18.13gr - 10 brand new tins packed in sleeves of 5. PRICE: $120 SOLD

4) H&N .22 Barracuda March 21gr 5.52mm - 12 new unopened tins. PRICE: $80 SOLD


5) H&N .22 Barracuda March 21gr 5.50mm - new unopened tins. PRICE: $45 SPF

Hey fellow AGN members,
I am a long time Crown .25 pellet shooter and after my uncle gifted me with an Express, I want to start shooting slugs. First and foremost, I am a hunter and part time home range shooter. I haven't a clue what I am doing tuning for slugs. Uncle had it set @150 BAR. He had the Macro wheel set way up. I took that back to the 13 recommended setting. for starting. Been tinkering with various weights and brands of slugs. I would like input from you all on your favorite slug and settings. I would like also like two to three clips or more worth of shooting. This platform is heavy enough taking even a pony tank of air is not feasible for a long walkabout in the field or woods. I know how accurate my crown is with pellets. @ 50 yards shoot a single ragged hole. I know slugs are better suited for longer ranges but can I expect the same with slugs? Thanks,

Marty

Im thinking about buying the gx cs4 for filling my 45 min SCBA tank and a my small guppy tank what's y'all's thoughts on them?.

Good morning all,
I am looking for someone who does re-seal/tune ups on Webley Tempests. I have two of them and I believe one is in dire need of an overhaul. I have called Baker Airguns over in Ohio, but he doesn't service them. If anyone has some experience with a airgun smith that services Tempest please let me know
Sincerely
Mark

Was in AZ this weekend and picked up this beauty during the AOA Memorial Day free walnut stock upgrade promo. 20 Cal.

It's been 2 years since we lost our friend Will Piatt.
His wife Ginger is putting together a book about him for his family and you can contribute your stories or thoughts about him at the link below! Will had many friends and gave a lot to the Field Target community, so if you feel lead, click the link and add your thoughts! It can be as short or long as you wish. Thank you!

https://docs.google.com/.../1FAIpQLSfUDqx4vw6trB.../viewform

Was shooting these Healthways air Pistols and rif;e.

Ok yall thinking about getting the Leshiy 2 30 cal. Idk about barrel either 450mm or 600mm barrel.i do mostly target shooting And hunting out to 100 yards nothing farther So pellets all I shoot.

I had the oportunity to shoot with the new Vulcan 3 HP cal. .30
Unfortunately the wind was too strong
I shooted to gong at 150 meters with ZAN 59 grain and despite the wind the rifle performed very well

Here is the video with english subs:

Hi, looking for an S-TAC FFP mil 3-16 or 4-20. Thanks

Works perfectly - as I won't be able to host shooting guests outside any longer, I don't need three range finders.

$60 via PayPal F&F shipped within the continental US.

Thanks for looking. DZ

Hello guys
I am looking for Jaeger .22 or .30 in bullpup setup. If anyone wants to trade - please let me know
I have bunch of great guns.

After 10 hours of use.... My


I guess what I'm looking for are some instructionals for
▪ disassembly
▪ trouble shooting


Thanks!

Matthias

This gun can pass for old, new stock. Never shot the rifle until this ad. Five shot chrony string with 16gr. Apolo pellets: 813, 789, 771, 775, 775. Standard Deviation: 15FPS. 21.86FPE. No trades, third party, or international sales. Will ship double boxed, UPS ground insured CONUS. Weight: 13lbs. Dimensions: 47" x 12" x 4.5". Buyer pays UPS ground insured (Pirate Ship). Paypal FF/Venmo/Walmart2Walmart or USPS MO. Asking $825 + shipping.

Is there anything out there like the original Shoebox? Mine has been trouble free other than a couple routine rebuilds over the course of something like 15 years. Where it is electric powered it only needs a tiny/quiet compressor and an occasional dab of white lithium grease on the pistons. I am worried that mine will die at some point as parts are drying up. the Altaros while nice is air powered and requires a lot more first stage air IE a large compressor. I read about nothing but failures from what’s available today. Is anything worth buying?

I just got off the phone with a farmer friend who is going to show me a new place to hunt pestilent ground squirrels. I can't speak for you fellers, but I would rather have an hour in a new hunting ground than a week at Disneyland. What makes it even more fun is being able to be have it all to myself...no waiting in line, no parking problems, no traffic, no screaming rugrats, and now that I'm retired I can go any day of the week. Being all alone is not my first choice, but my shooting buddy passed away. Now when I find a new spot to shoot, he always goes with me in my thoughts. We used to have some terrific times out shooting together. Don't take your good times or your friends for granted, they don't last forever.