brand new tansu 22 cal

here is list whats for sale i got to get a price for all thats listed

Ok guys/gals, should I paint or let nature do its thing. Mr Bear will be taking aims @ 70 yds. Thanks in advance.

Are “high end” scopes all they are cracked up to be? Or are mid range scope 99% as good without the prestige of a tier 1 scope?
Before you go jumping down my throat, I’m sure there are comparisons from reviewers, scope experts, etc that discuss a smidge of chromatic aberration at the tiny edge, yadda yadda blah blah blah…

Last weekend my hunting buddy Gerry @Gerry52 and I compared the Athlon Cronus 4.5-29x, Athlon Midas BTR gen2 4.5-27x and Sightron S-TAC 4-20x side by side outdoors around noon on a sunny CA day. We compared optical quality only.

All three scopes were set to 20x, mounted on guns sitting side by side on a table overlooking a winery and trees in the distance. We took turns looking through each one at least 3 or 4 times. And our conclusion was they all had excellent optical clarity and pretty much looked the same. We both thought that for hunting purposes out to a couple hundred yards, there was practically no difference.

Take it for what it’s worth. The S-TAC normally sells for about $500 but can be had at times for about $300. The Midas BTR gen2 normally around $600 but sometimes can be had for $450, and the Cronus normally about $1600 but at times discounted as low as $1000.

If I had to do it again, I’d buy two or three Athlon Midas BTR gen2 or Midas TAC than one Cronus and be perfectly satisfied. When I shot the Long Range event in Oregon the end of April, and did quite well, I used the Midas BTR gen2.

Just my two cents on the matter. Going anywhere much over $500 (discounted) illustrates the law of decreasing returns…

I thought my back yard set-up was "neighborhood friendly", I was wrong. My wife heard me dispatch a squirrel and said it "sounded like a gun". I'm shooting a 22 Dreamline, pushing out Hades pellets at 890fps. I'm pretty sure what she heard is the pellet hitting the "target". It make a pretty decent "pop" when a squirrel takes one to the noggin.
My only experience with 0.177 is with a springer which makes enough noise its difficult to tell how much noise the pellet strike makes.
My question for the Airgun Nation: are 0.177's quieter than 0.22's? Will they reduce the noise of the pellet strike on small pests? Thanks.

Raw .30 @ 77 fpe vs Daystate gp .177 @ 20 fpe ringing steel at 70 yds. Leftys rejoice!!!!

I’ve noticed in the rare instances that I injure a furry friend with bad shot placement, even if I chase him down and finish him off, the initial location of injury becomes deserted for the next few days

As if getting shot without dying release some kind of warning/danger scents that keeps other squirrels from coming by?

SALE PENDING
These 1200 pellets have been weighed and labeled on both front and back of tin.
I did the math using PA with their buy 3 get one free along with the 10% code they run around 9 cents per pellet, excluding tax and shipping. I come up with around 75 bucks.
The price for these pellets is a firm 48$ ( works out to around 4 cents per pellet) You pay the shipping. Note: Pirate Ship will be used to find the lowest carrier, I never make money off of shipping. Once I have your zip code I can message you the actual cost for shipment. Payment can be cash, personal check, or PayPal friends and family. Neither of us need to pay PayPal but if you want to cover that cost, be my guest. I trust you and you trust me.
Now for the list:
57 pcs. 33-33.5 grain
77 33.6
84 34.1
108 33.8
120 33.9
217 34.2-34.4
233 34
300 33.6-33.8

Don't wait around, these will go fast and you will miss a great deal. Thanks for looking and thanks AGN!

Perusing RMAC 100 yr results and trying to locate the whole score board. If someone would guide me to the results , I'd appreciate it.
Now, why I posted, didn't the rifles used be listed w/ shooter and position?
Interested in SKOUT results. Wondering if they did t fair out. All things being fair, when Impacts are in @ 40 to 1, it's not really much of a bragging right when you say Impacts won.
I see the SKOUT dropped the price to 2495. This might start a cascade effect in this overpriced trade.
Okay, shoot at me.
OOOOH, I JUST READY THAT SNEAKY ADD A LITTLE CLOSER. NO EXTRA BARRELS! So not the big sale I first understood.

Set up my arb awning and wind breaker very quickly last night.

Very impressed, and yes that's an led strip for lighting.

I was wondering why I haven't seen any squirrels or rabbits recently...This may be the answer, well one of them, there are two. I was only 15' away with a 250mm lens. edit: I'm pretty sure it's a Coopers Hawk. A few years back we saw a fledgling,

Managed to purchase this Donny FL Emperor for my new Bushbuck.
Looking forward to seeing,(hearing), how it works on the .45.
I have to use hearing protection while shooting it as is.
It will have to wait for now. The stock pictured is all that remains of the Bushbuck.
The actions has been returned to AOA for repair.
It started leaking.
I will share as the drama unfolds.

Doc

$1600 Edgun Matador R5M .22 caliber, in pristine condition perfect working order, no leaks. Comes with blue laminate stock (picatinny rail installed), new walnut stock (picatinny rail installed), fill probe, o-rings for a complete rebuild if needed, spare charging handle springs (stainless installed), BAT moderator, stock moderator included, 4 magazines. This PCP is a tank, extremely accurate, and out of stock everywhere.

NOTE: scope, scope rings, and bipod are NOT included

Located in Layton UT, sorry not willing to ship local pickup, price is FIRM.

Want to give a big thank to FX for talking the time and effort to develop a proper shoulder rest for the AF bottles ..is greatly appreciated...

I was bored a couple days ago so I took my best 33.95gr shooter and started doing a test but the heat was ruthless. I put a target at 120 yards and 180 yards just to narrow down where I need to focus. At 120 yards my gun was still good. At 180 I think my pellets became little paratroopers. When I get time I will incrementally work my way out 10 yards at a time. Just curious and for conversation sake, how far have you guys shot pellets accurately? Doesn’t matter the caliber. I have taken birds with my Taipan .22 shooting 18’s out to 130 yards. Who knows, it might have been luck or the gun could go to crap at 131 yards. But I never spent any time with pellets shooting over 100 to see where each gun, pellet and tune goes off the tracks. So to save me a lot of shooting, I’d like to hear just how far you guys have shot them and still hit stuff. Be it a can, spinner or target. Maybe this has been discussed but I’ve never seen it.

Just now getting into airguns for pests around the house and backyard plinking. Researching rifles and air compressors but haven't made the dive yet. Lots of good information on here and many vendor sites online.

I've been debating on going with a new Umarex Notos since they are back in stock or something in the Classifieds, preferably in 22. Challenge is the rules for Classifieds with 10 posts and 10 activity days but I feel like it's a better buy. Outside of Notos and Prod, any opinions on preferred brands? Any brands I should steer clear of? I was tempted at the AGT Vixen ad but is this overkill for a first PCP?

Sold
This Texan is in great condition has the Tx 2 Valve, comes with The Donny Moderator drilled out from .357 to .457 works great but if you need ultra silent it also comes with the Donny extension . I have it pictured with just the Moderator and then with the extender. It come with a bag of 280 Grain Pro Slugs and a new box of Nielsen 196 Grain slugs. Comes with the picatenny rails for your scope and underneath for your bi pod. The bi pod in pictures comes with it as well the scope not included. 900 O.B.O Shipped to the lower 48 Thanks for looking.

You can call or text Sonny @ 928-848-4969 Anytime I am retired lol

How many of you run Trijicon scopes.? I'm definitely tempted & wonder how they stack up for clarity again $ for $ with others. I should say clarity at 20x & up.
Joe

So today I got to shooting the blitz yesterday it was doing fine no jams. today each shot I have to pull bolt back to shoot again, I did have bolt way back and turned up in the notch for 7 hours but that's not even that long so I don't know. Why is it jamming now each shot now, If I cant fix the problem its a return as I don't want it I bought it alone for the full auto an If I cant get that to a level of reliability then its useless for me. I added a donny fl adapter an am running a tatsu, was doing fine yesterday with exact same setup. It jammed 5 times in a row then it cycled for like 16 shots an again jammed I was dry firing to make sure its not a mag issue.

Has anybody had their notos apart to let me know easiest way to fix this leak.

Hello,
I am looking for another springer for hunter class or possibly WFTF. I currently have a tx200 that I just put in a cs1000 stock. I put in arh spring in it and that's it. Shoots great. I would like to try a HW for comparison. I'm a lefty so either one would work great. I would definitely change spring because I want under 12fpe. Honestly I love the cs1000 stock so I would probably order one for the gun. I know barrel droop is a problem with the 98. I know they aren't as easy to work on/break down as my tx200. I think I can figure it. I honestly want a butter smooth shot cycle and cocking is not an issue for me. I mostly see tx,98s, one 95 at matches and that's it. What would you guys that has shot them in matches recommend? I'm not concerned on how the shoot of the bench but how the shoot of sticks or knee. I think I want to use vortex piston seal but probably an arh spring or tbt. I welcome any advice. Thanks

Jon

I have 3 vulcan 3 rifles with 700mm barrels. Synthetic stock.

Only shot a few times as a youtube review copy.
Firm Price $1195.00 For Each Rifle. Paypal only ......

All Of Them Together.



.22 Call



Paypal only $1195.00


.25 cal




.30 cal

Let the fun begin with a full interview with DonnFL discussing this new item from Karma Airguns.

Looking to see if anyone is interested in trading a arken epl4. 6-24x 50 I have a like new ep5 includes scope rings

So a Very Good Friend picked up a Gen 1 .22 RainStorm at Toyz that Shoot a couple years ago.
No magazine, stock was broken and a bad fix to that. Got a good price on it but just never liked it much.
Being We wheel and deal with each other alot I asked if I could buy it. Sure enough after some cash and parts deals? It became mine.
I let it set for a month or more as I searched for magazines. I finally was guided to someone that sold me 2 for a VERY good price!
Let it sit a few more weeks before I filled it to get to testing things. And here is where I kind of went Stupid.
I filled off the SCUBA tank so just under 200 BAR which is the rateing for the RS. No problem. But pressure gauge only went to just over 100 BAR.
Asked my Friend and he said he believed the gauge was bad. DER OK! Said I. Loaded a magazine and took some shots. What a weak POS I got. Or so the STUPID voices in my head told me.
Now some of the voices speak in languages I don't understand and some times they go missing. I assume to visit relatives or a strip club.
Well today one of them showed back up and told me "You know if there's a Regulator in there the gauge is reading fine right?"
Thank God that voice speaks English! (Well with a Scottish accent but I can live with that)
Degassed and took the tube off. Sure enough a Huma Reg and one of those danged 'Brissle brush' depingers!

Now I have a Huma Reg tester so I can reset the reg for Power over shot count. (Oh the joys of a compressor!)
So taking a gamble on what looked like a possible parts Gun? I'm pretty happy with how things are turning out as I Love the Evanix Guns!
This one has alot of work to get it where I want it but Scotty says I did good.