Gimana cara nya untuk belanja sperpart senapan angin fx impact mk2

I received a new compressor for Orcair for review and it has quickly become my new favorite of the 7 or 8 I have. This thing is totally autonomous and can even fill up to 2.0L tanks!

Check out my video here:

Price is Firm, not accepting offers.

Upgrade Sale. Recently bought an Accu Tac, so I’m passing this one along. Carbon fiber legs, very adjustable, NOT a quick connect.

CONUS $50 PP FF, Apple Pay, Venmo. Shipping included.

I got the 100th annivesary edition. #490 of 2023 made. So beautiful. Williams peep site. Fiber optic front site. Super light weight, yet solid.

It won't pump up. It did at first, but then I :

dry fired it many times filming the trigger

shot it once with the bolt open, it snapped shut

When I sat down to film the shooting portion, the gun would not pump up.

Did I do that?


Are you not supposed to dry fire pump guns?

---

Like this gun? I posted a thread with alot of close up pics here: https://www.airgunnation.com/thread...man-326-close-up-pics-2023-were-made.1297072/

Buy a hw97 177 from krale.....big decision to make but I can only have one. I had a 22 hw 97 but I still never tried a 177 so what do you guys think? Just for plinking in backyard and target shooting .

Ok just an interesting question. I was perusing the AOA used rifles and found a Revere in a full blown benchrest stock. I'm really not interested, but it struck me that the "fairly hard to adjust" Revere wouldn't be on my list of bench rifle actions. I know you can throw any action in a bench stock. Was curious what everyone thinks of this pairing??

I don't have an m3. But was wondering for those who do, do you still need to dry fire 1-2 shots b4 a hunt? Cause I know mk1 and mk2, the first 1-2 shot will be slower. I don't think it have anything to do with reg creep. It's just how most if not all guns do it. So wondering if the m3 is the same since it have 2 regs. Maybe having 2 regs fix this problem?

Will only ship to lower 48 states
Shoots slugs or pellets. scope not included.
FX Impact MK2
M3 cocking block assembly
M3 power wheel
KL Arca Rail
KL GigaRail
.25 Slug A liner with cf sleeve
Huma high flow transfer port
Huma high flow pellet probe
Orion magazine insert
QD fill probe extension
Comes with a couple of tins of pellets it is tuned for.
It will come with FX case and moderator.
It will also come a .22 Cal Donny that was drilled out for .25 and it is whisper quite and the gun shoots lasers. 1,350 shipped

I also have a GX-E- CS4 Compressor these compressors work great does 5,000 psi fills easily and fast. 350 bar no problem. Will come in origional packaging. 600 Shipped or if you take both Gun and compressor I will do 1,850 shipped..

No Trades you can contact Sonny @928-848-4969

After 7 years of being in airguns, I have finally picked up my first RAW. Crazy because they have always been one of my top choice for looks and quality. I have mostly steered toward adjustability, so haven’t picked one up… until now.

After selling my Thomas earlier in the year because of a crazy job and not being able to shoot FT like I want and seeing no end in sight, I’m hoping that a recent job change is going to give me more free time. The RAW popped up and I knew I couldn’t let another one pass. This thing is a beauty too and has a lovely 2 stage, 3.5oz trigger. I’m going to have fun!

When I saw it was Rick, a well respected member and FT shooter, I knew I had nothing to be worried about. Quick conversation and two days later, I have TM1000 #5, yes #5, in my hands.

I wasn’t planning for this so fast, so now I need a HFT scope. I can’t even shoot it! I know what I’m looking for now.

I can’t wait to share more as the journey continues, but I was so happy, I had to share.

Looking to sell my Thomas HPX .22 benchrest gun.

This rifle like all Thomas rifles are layers lowest score 236 best score 246...(I know this gun shoot better than I ever could)

No Longer Available. Gifted it to a friend. Thanks.

Older filter that came with an old compressor I bought. It, the compressor took a , and now I upgraded everything. So….

Upgrade Sale: looks meh, but works perfectly! Media is like new as far as I can tell. Easy to replace if needed.

Below find stock picture from internet along with actual.

$65, shipped CONUS only. PP FF, Apple Pay, or Venmo.

Two years of searching and disappointment I finally got my HW98 .20
Approximately July 20 I saw the 98 at AOA. Almost had a heart attack. I tried buying from them before, no dice, because I live in Canada. They want nothing to do with the paper work involved. So I called my man Wes who is a dealer and can buy from them. For 3 days I get a voice mail he’s busy. I’m watching that gun 3-4 times daily with panic. I posted here “Where’s Wes” and find out he’s in Scotland. Had to change my depends. He’s gone another 1 1/2 weeks.
‘I’m watching that gun daily like I owned it. On Aug 7 a member jccams blew my cover, announcing there’s a 98 at AOA. Luckily I read it shortly after he posted it. Another Depends, major load. What to do? I immediatly called I think Kirk at AOA. Told him of my dilemma and asked if I paid for it Wes would contact them when he gets back. Kirk was A1 and saved the day, awesome customer service!
I have to thank Kirk and Wes at Airgunarcheryfun for making this work.
This is the new 98. Already for the bench.I picked up this scope weeks ago.To me this is the ultimate.Already a place for it. Just finished my coffee after supper. I’m going to shoot this baby on the range. Crow

Silent Thunder Ordinance (STO) Pugio 1/2UNF thread. I received this with a gun that I purchased but didn't use it. There are light blemishes opposite the logo which I tried to show in the second pic. $80 shipped CONUS.

Yesterday I got to shoot a couple of my Twenty caliber Weihrauchs. First two rows was with my blue R9 with JSB 13.73.
The last two rows were my 98. Third row is JSB 13.73. Fourth row was H&N 11.42s

Five shot groups at 25 yards. Stickers are the same size as a dime.

Sold.

Upgrade sale. In perfect working condition, FX pocket Crony, G1. Original box included. Batteries not included, don’t want to deal with shipping issues. CONUS only, shipping included. PP, FF. Apple Pay. Venmo all accepted.

$120.00

Thanks for looking.

Christian

Hello Forum Members,

As soon as you have a problem with PayPal and they hesitate to correct the problem get in touch with your State’s Banking Commission.

On June 26, 2023 a Forum member sent funds with PayPal via their “Good and Services” payment method to pay for an item that was purchased from me. Within 5 minutes after I received the email from PayPal notifying me that they were holding funds for me, I called them on the phone. The email stated that I would have to give PayPal my “Tax ID Number”. When I reached PayPal, I explained that I DO NOT have a Tax ID Number, and that I REFUSED the payment, and instructed PayPal to RETURN the money to the “sender”.

NOTE: Legally at this point I am NO longer involved in any way with future action (s) pertaining to these funds, either by PayPal or the sender. ( For reference purposes the amount of the funds in question was greater than $1,300.00 )

Just 3 days later PayPal attempted to withdraw that exact amount from my Bank Account. However my Bank will not allow any transfer of funds from my account without my permission and BLOCKED PayPal. One week later PayPal tried again but was blocked by my Bank. I called PayPal several times and told them that I had ordered my Bank to permanently block PayPal from EVER send or withdraw any funds from my account.

Several weeks later during a phone conversation with a PayPal supervisor, the agent threatened me by saying PayPal “HAD” reported to the IRS that I had in fact received these funds and that I would be responsible to pay up to 24% taxes on said amount. The agent also demanded that I give PayPal my social security number in lieu of the Tax ID Number.

NOTE: I do not give my SS number to anybody, period. And I explained to the PayPal supervisor that at some time PayPal would have to provide PROOF to the IRS.

After many emails and at least a dozen phone calls ( I did not keep count ) to PayPal, they still refused to correct the issues. On September 04, 2023 I composed a complete detailed letter to the Texas Department of Banking. Within 3 days I received a reply stating that they would file a complaint against PayPal.

Today, September 14, 2023, an agent from PayPal called me and explained that “they” HAD resolved all incorrect issues and at my request CLOSED my PayPal account.

One follow up to this issue, PayPal held the “senders” money ( a Forum member ) for over 2 months before giving him a refund.

I sure hope sharing this information will help other Forum members in the future.

ThomasT

HFT500 in perfect condition. I bought it with the intention of shooting benchrest but never got to it. It's certainly accurate enough for serious benchrest, but it's been a safe queen.
$875 plus shipping.

I am assuming a wheeler torque screw driver is what i need to use to mount a rifle scope.

Good morning!!
I have a FX Dynamic in 25 cal with a 600mm barrel.
What slug brand and weight is recommended for accuracy past 100 yards? Also what speeds do the slugs need to be at for best result?
I’m trying to avoid wasting a ton of slugs and air (I don’t have a compressor).

Thank y’all!!
John
Boerne, Tx

I’m offering this with 15 tins for $750 shipped or alone at shipped. I just want to buy a .25 Patriot so trying to move now, or I’ll finish the stock in truoil and keep if no takers.

This beauty sends a RWS 14.5g pellet out at 657-658fps for roughly 13.9ft/lbs. Group shown at bottom was printed with RWS Superdomes right out of the tin, rested on knees sitting at 9 yards/27-28’ with irons on the rifle. One .22 pellet for size reference.

It was tuned & piston buttoned by John Thomas of Thomasville PA late last year. Note the upgrade on hardware and set back straight blade Rekord trigger. It’s got a solid break, thunk, snappy 35e that is absolutely amazing. Could make a great small game/bird pesting airgun although I find it too nice for such. Wonderfully precise shooter but not something that I would want to cock all day as a 10m group shooter, and that’s about 80-90% of my shooting anymore.
I’m offering it with ( shown at bottom) a nice older duplex Bushnell Trophy & B square one piece fully adjustable mount & 12 sealed tins of CPHP & 3 RWS Superdomes or without.



As a lefty I hook release with right thumb over the top and cock.
There may be 1-2 slightest imperfections in the stock
I’m looking for $750.00 with all pellets, Busnell & B-Square shipped anywhere in the CONUS paid via USPMO or PayPal G&S add 3%.
Option for HW35e alone $565.00 shipped anywhere in CONUS.

Last week offering it. If no sale, fill pores & pass it down to one of my 9. Contact me through PM here.

The ONLY trades I might be interested in would be:
a high power .177 of either type that can send 13.43-16’s. Or a good .25 break barrel. Maybe a RWS 54-56TH and cash on my end

I have filled my bottle to 220 bar and attached it to the gun, I then try a dry fire and there is no air release.
The rifle was taken apart to the main components recently this is removing trigger mechanism, barrel, stock and reassembled.
Can anyone guide me as to what might be the issue and how I can rectify the situation.
Thanks

i knew there had to be more than one! staying up late manning the tripod in the window paid off .. we're clearing the threats lol .. this one was textbook, dropped like a sack of potatoes .. i did the humane thing and made it quicker for him .. dumped the whole mag in him ..

Meet Neil Palmer who is the reigning HFT World Champion, Neil chose to take on rounds 6 and 7 of the UKAHFT National series with the latest Daystate Red Wolf Grand Prix. Last Saturday Neil took 3rd Place with a great 55 and on Sunday, he took the Open class win with an amazing 57ex60, which is all great preparation for this weekend (16-17 September) when Neil will be competing in the World HFT Championships with his Daystate Red Wolf Grand Prix. Good Luck Neil!

the huma reg is impressive, i like the airmarksman backbone even though it doesn’t match, i did not want to spend so much on the backbone but finally broke down and now i have no regrets. (matches M3?). I have the sleeve for the straw barrel but not excited about glueing it on. This impact started out as a compact 25 cal.