Almost new BinTac T9 9mm semi auto Pistol/Carbine. Equipped with adaptor and Ronin by Donnyfl. Also equipped with a rear AR style stock. Comes with 2 factory mags and and 1 CNC mag. Has Red dot sight and laser/flashlight combo. This is a very powerful and accurate Pistol/Carbine-over $1250 invested

Price $850 $800 OBO. Will split shipping.

PayPal F&F or cash, Don't hesitate to ask questions.

Thanks for looking,

Dan

I shoot in my back yard mostly at targets, from a bag rest at a range of 65 to 70 feet. Using a break barrel that cost under $200 and came with a 4x32 scope. Sometimes I do shoot at a pest or two. Now that I have retired, I find myself using it more but having trouble seeing the target, so I put the scope on. Now I am finding that I have to remove my eyeglasses to get a good sight picture, (both eyes open) Not sure what type of scope to look for but would like more magnification. Would like to keep the price low, (to keep wife happy) and my wallet. I know that will limit my options, but all suggestions will be greatly appreciated Thanks.

I just ordered some targets from them. They arrived fast, and they kept me informed along the way.

For sale is this Scott 30 minute tank with new 300 DIN flow restricted valve and 20" micro bore fill hose. I lucked into several of these tanks that were obviously surplus units (your tax dollars at work). I removed the Scott valve and replaced it with a new fill assembly with a male foster fitting on the tank and fill hose with female fosters on each end and a strain relief the whole length. This tank makes a great compromise between the large 60 minute tanks and the small 90 cu in bottles. This tank is dated 09/07 and therefore past it's "15 year service life". Due to it's age , no commercial business will fill it. You must have your own compressor that is capable of filling a bottle of this size. Use this at your own risk and assume responsibility . I have aired this tank and checked for function , and it is ready to go. Selling for $180 including tracked and insured shipping to the conus. To comply with DOT rules , the tank will be shipped empty . Not interested in trades or offers at this time . Please deal by PM . Thanks for looking. Herb...................PS, this is the last one I have for sale.

After sitting for 6 months my Impact M3 developed a massive leak while trying to fill with air it just rushes back out from around the trigger?!?! Have had it completely apart twice including the regulator and can find no O ring that doesn't appear to be pristine......any thoughts?

Utah airgun sent me a newest model from Europe complete with all the fixes from first run of M4 and it works amazing. The current tune will shoot 10gr fx pellets amazing in .177 and switch to the .22 same tune shoots the 18gr jsb amazing just a couple clicks on the scope and your good.
Gun
.22 barrel kit and 2 mags
.177 barrel kit 1 mag
Rear sling adapter
Black arts barrel band
Reason for dropping on market is im just going back to Daystate to avoid dealing with tuning. The paper work will come with gun and warranty paper work.
$2300 f&f
Will trade for edgun leshiy 2

I’ve had my Gk1 four days and now it won’t take air, it had been doing really well. Yesterday I shot twelve rounds at full power without issue, I had 7 mpa of air left, when I got home I noticed the air was gone. I then tried to refill the pistol and it wont take air. I contacted New England Air Gun, they had me turn the power setting all the way off to reset the pistol but it still wouldn’t refill. Anyone else had this issue?

Bought off a forum member, but I never got to use it. Selling for what I paid for it - $200 shipped CONUS.

Thank you.

Need help here peeps. I followed all the instructions. Used distilled water for the coolant. The unit is running off AC 110 which is set properly on the unit. I have the max pressure and requested pressure both set for 300 bar. It was working great for the first 4 hours but after it hit 2000psi it started randomly shutting off the pump. The unit would still have power and the fan would be running but the start button wouldn’t be illuminated green and the off button would be on. If I hit the start button it will start right back up but then it turns off again within 3-15 minutes. It’s not from overheating either because I babysat it today after leaving it shut off for 24 hours and it turned itself off within 5 minutes.

I sent a message to the manufacturer because I bought it direct but I am hoping that I am just doing something wrong. I read all the directions though and I can’t find anything else to do. Also to note. After a couple shutoffs last night I tried giving the grease thing a half turn but that didn’t help either. As always, help is greatly appreciated!

So I derailed the thread about an FWB 65 with a brief discussion on other target pistols. Thought I'd give this it's own thread. I'm fascinated with the accuracy of the 10 meter pistols (and those that wield them as intended, off-hand), I recently got a great deal on an FWB P8x. Already had the Baikal. And a Crosman 1701P. All are great in my short (15 ft) garage range, wanted to try a true 10 meter test so took my two most accurate outside for a death match ;-). To my eye (too lazy to measure ctc and make it scientific) the P8x wins by a small margin. Based on engineering quality and fit, finish, and trigger, I thought the P8x would be a runaway winner but not so...Cheers! Rick

I'm getting a war warp. Wondering if there's anyone with parts for sale. Not sure what I need yet. Spare magazine. .30 conversion kit. Etc

I rotate and shoot a stable of pumpers and springers. However, I don't track shot count. Is there an easy way to determine when lubrication and other maintenance are required? Should I track the shots taken on each, use a calendar, or do both, or is there another way? I have Daisy BB guns, several pumpers, and several break-barrel springers. Thanks in advance for any replies.

I have a .22 Gamo magnum, .22 pcp avenger and .22 impaxt M4. I want to step up to a .30 pcp. If I buy an fx barell kit, mag, and moderator I am looking at over $600. Should I buy that or get a cheper .30 like a hastan blitz for $799.

Young buck that recently shed his antlers has a broken right leg. May have been hit bt an auto.

Thought I'd share my notes...

I'm in the honeymoon period with the .22 caliber HM1000x I got just before winter hit and we are just getting to know each other.

The HM1000x was too much gun to be shooting indoors so today's calm, 50 F weather had me at the shooting bench for the first time in 3 months.

During the initial acceptance testing the PCP preformed well averaging 955 fps for 51.5 fpe with JSB Monster Redesigned pellets.

Ergonomically I found the grip to be too small for my hand, the stock too short and the trigger too light.

I swapped the grip for a larger commercial one which will do until I can make a custom one.

The spacer I made (picture attached) gives me a 13.5 to 15 inch adjustment range for the LOP.

The trigger settled in nicely. I suspect that grease on the trigger needed to be displaced (that's what it felt like was happening) because after a bit of use, the 1st stage smoothed out and the distinction between the 1st and 2nd stages became much clearer. The trigger was factory set at 3.5 ounces which I increased to 6.5 ounces.

I really think that RAW should consider shipping the HM1000x with the trigger set a bit heavier and let the customer adjust it down if they prefer. I'm used to the light triggers on my 10 meter target guns but not everyone can shoot a 3.5 ounce trigger safety.

I'm getting 36 shots from a 230 bar fill then the HM1000x falls off the regulator at 150 bar. I'm considering swapping the 480 cc bottle with the 700 cc bottle from my Panthera to increase the shot count a bit.

Hope this is of interest.
Cheers!

---

NLA

Perfect MK2 .30 impact 850$. Bipod not available, scope is not included. Will sell scope separately.

Ux Notos with bottle mod with the real Huban dream Notes drop block 3-D printed LDC 3-D printed adjustable cheek height butt stock discovery 4-16-44 scope c88 Fx 500mm barrel and shroud and FX superior liner and 3 10 round mags and 7 12 round mags I get about 90 shots per 3500 psi fill pressure Looking to get $500 shipped lower 48

Hey Airgun Enthusiasts!

Get ready to experience a revolution in break barrel air rifles! Pyramyd AIR is thrilled to announce the pre-order launch of the Air Venturi OmniStorm™!

This isn't just another air rifle; it's a game-changer designed for ultimate versatility and performance. The OmniStorm™ boasts the groundbreaking OmniPiston™ system, delivering incredibly smooth, vibration-free shooting across all power levels.

What makes the OmniStorm™ stand out?

• OmniTuner™ Customization:Dial in your perfect velocity and cocking effort! Whether you're targeting small game or enjoying some backyard plinking, the OmniStorm™ adapts to your needs.
  
  
• OmniPiston™ Technology:Experience the best of both worlds! This innovative system combines the adjustability of user-friendly systems with the power of traditional gas pistons. Perfect for sharing between family members, regardless of strength.
  
  
• Vibration-Free Shooting: Say goodbye to jarring recoil! The OmniPiston™ ensures a consistently smooth shot cycle at any power setting.
• Versatile Sighting:Comes equipped with bright red and green fiber-optic sights for quick target acquisition. Plus, an 11mm dovetail rail is ready for your favorite scope.

This rifle is perfect for anyone looking for a highly adaptable and enjoyable shooting experience.

Don't miss out! Secure your Air Venturi OmniStorm™ today!

Click here to pre-order now: https://www.pyramydair.com/product/air-venturi-omnistorm-air-rifle?m=6532#13965

Let's discuss! What are your thoughts on the OmniPiston™ system? Are you excited to customize your velocity with the OmniTuner™? Share your questions and comments below!

Happy Shooting!

WoW i just looked at a bunch of Air gun for sale sites and it got the impression everybody is using E-Bay to price their used guns .

FX Dream Tac. Never used, in factory condition. Does not come with butt stock. $1050 firm with shipping, US only. Payment options to be discussed at time of purchase.

I have been dialing in my M3 compact .22 for years. It’s always been good but never great. So about a month ago I went at it one more time to see if I could squeak that last bit out of it because it really is one of my favorite guns. I think I did. So tonight instead of one of my other proven long bombers for picking mice off a 130 yard feeder, I decided to see if this gun was capable of mouse accuracy at that distance at night. I set up and dialed exactly what Strelok said because I confirmed the data I entered was jiving with my gun last week.

This gun is not a night hunting gun often so I had to grab a Pard mount that I don’t use because the unit doesn’t click in very well. But I figured it would be good enough. It wasn’t as you will see in the first video. Two more videos to come to further explain this debacle. Age related or does this type of stuff just happen?

I can make to order

Solid walnut WORKSTATION except for the threaded bolt which is 1.25", straight grained maple.

Features:

• 213.5"x8" x 8.5"
• 15 pounds
• Walnut is kiln drilled, 2" to 2" thick.
• Thick leather protects the firearm at all contact points
• Threaded wood bolt is made by yours truly and is bi-directionally adjustable
• Grip support is also adjustable horizontally
• Finish is 3 coats of Danish Oil
• Joinery is wood glue and 14 dowels

$200 TYD.

That's a Huben K1 in the workstation. It is designed for powder burner rifles, but it works just fine for air rifles.

I've made about 40 of these in the past year. (oak, cherry, and walnut). It takes me about a week to make these.

Need to do a complete change out from 700 mm .25 barrel to 35 barrel/shroud. Now I have the magazines, magazine loaders, barrel tuner, bolt, moderator, etc. All thanks to a member here. Is there a really good you tube showing a swap out? TIA. Be Well Brothers, B.

I have been shooting for a very long time and shooting seriously since 2008. I was blessed with a 25 yard indoor shooting range year round and if I opened the big door a full 70 yards to my fence. There was a house on one side and garage on the other with mature trees. Even though I shot 100-300 pellets a day I never shot in the wind.
Now I live in Iowa. If I don’t go to the range because it’s to windy I will never go. So I have decided to embrace the wind and look forward to just tossing lead and learning what is going on. Reading it and hold over will be like a whole new thing. Then when the wind stops I can hit stuff again.

My gun / Scope and pellet stuff is all sorted out on both my PCP for Hunter class and my WFTF springer. So this should be a fun thing to do. Like learning a whole new skill. I’m really looking forward to it.