Decided to let go my Artemis/Spa P12 bullpup. 22 cal/ 10 shot repeater.
These were originally single shots, this one has been converted to accept marauder mags by another member… I can’t say who did it, I can say it was well done and functions great.
It is unregulated and likes nsa 17.5 slugs. Currently tuned to shoot them from 970-920fps for 2-3 mags. Very accurate, shoots 1/2 at 40yds easily, quiet without a mod, the only noise is a “ping”!
Doesn’t leak.
Stock has been painted with textured paint, blued the barrel, polished the barrel with j.b Bore paste, hammer has been lightened and it will still sling 17.5s over a 1000fps by turning hammer spring in.
This is a great woods/ squirrel gun!
Comes with one 10-shot mag and fill probe.

Asking 300 obo shipped inside CONUS
W
May be interested in a trade for an Artemis M16.

Includes all you see as per the GK1. The back sight is broken, a new one is included. The fiber optic insert fell out at some point, so it's missing. The red dot plate is for doctor I think. All screws needed are included. Scope and rings are included. Stock is fully adjustable and has extra bushings for raising, if needed. Factory supplied spare parts kit is included. Gun holds air and functions properly. 1/2×20 adapter with thread protector and 7mm allen wrench is included. The holster and soft case as well as the factory hard case are included. The mag pouch on the holster will hold a small moderator ie, 0dB 110c. call Bill and Addi @ 503-504-708four. Text or call ONLY. ALL OTHERS WILL BE IGNORED. I'm Bill. Addi can't speak human.
.$1,495 shipped conus. NOT OPEN TO TRADE.

I'm looking to Buy PCP
380$Shipped to Miami

Thanks you

Got this Ranchero 177 couple of years ago as a project but never got around to it. It shoots fine at about 20 FPE with transfer port on high. It can use a reseal though, transfer port has a pop if on low and seems to have a very slow leak. Never shot it much or hardly at all. Not sure where the mags went but will try my best to find them.

As pictured……$300 shipped. Sold!

OO" update"i stuck a magnet on it and it did'nt stick?

I'm quite sure I am not alone in having an almost addictive need to purchase new, different air guns. Despite having a ridiculous collection, especially after factoring in all the scopes, ammo, targets, cases, slings, & upgrades/mods Ive done, etc., I STILL want MORE!! So my question is: do we really NEED more airguns; & if the answer is no, then follow up questions are why not & then why do you think we keep buying them, and if yes, why the need. Different hunting approaches, compactness for carrying, ammo size/cost, I mean I could go on & on? Hence my asking the greatest online forum of airgunners! Do we (or I) actually NEED more airguns? (Help me convince my wife, fellas!)

So, I have: Umarex.510cal Hammer, FX Wildcat MKIII .30cal, Hatsan Blitz .30cal, Hatsan Barrage .25cal, Hatsan Jet I .22cal & Jet II .25cal, Umarex Origin .22cal, Umarex HDR .50cal, two Umarex HDS68 double-barrel shotguns, Sig Sauer Virtus .22cal, Umarex HDX .68cal pump shotgun, Seneca .50cal Double Shot shotgun & .50cal Dragonclaw II, Umarex .50cal HDS pistol, Umarex Air Javelin & Air Saber air rifles, not to mention 7 BB guns/rifles.

So, ladies & gents- what's the verdict? When are enough air guns enough? Or are there ever "enough" airguns?? I have my eye on the Umarex Primal shotgun....

Yellow Jacket FX Crown MK II Continuum with .380 mm length .25 caliber barrel and shroud. Also a 700 mm length .30 caliber barrel and shroud. FX stackable moderator, magazine in .25 and .30 calibers, Eagle Vision Infinity IPS-30 adjustable mounts, Aimsport Alpha 6 scope 4.5-27x50 SFIR. Sling studs added to stock. FX hard plastic case. This gun is a true tack driver in both calibers. About 3 1/2 years old. Purchased from Utah Airguns. Looks like new. Sits in the safe all the time. Message for more pictures or any questions. Air and pellets and you’re ready to go. 1,750 shipped to the lower 48.

Purchased new from Airguns of Arizona back in December (2023). Due to a severe shoulder injury I have not been able to shoot and will not be able to shoot for at least another year. The only pellets fired have been by Airguns of Arizona. This will include everything as new. Along with adjustable PRS butt pad, additional mag (2 total) and PRS ARCA rail. This has a 5 year factory warranty the huma regulator upgrade completed by AOA. Will also include Sportsmatch medium 30mm rings. I have sold and purchased many times on Snipers Hide and have 100% feedback. My user name there is MdQT if you are looking for feedback. I will ship this insured with tracking for $2200. (OBO) Prefer Venmo or Zelle, other options possibly. Please contact me here, 316-644-1616 or [email protected]. I can communicate via FaceTime if you would like to video chat.
Optic in pictures not included at this price. I will include optic for additional 1700$. This is a Nightforce nx8 4-32.

View attachment IMG_0918.jpeg

View attachment IMG_0921.jpeg

View attachment IMG_0923.jpeg



View attachment IMG_0920.jpeg



View attachment IMG_0925.jpeg

I decided to get a springer again after selling my rws34 I shot when I was a kid and felt like I was missing a springer in my life.

After researching this forum to death I pulled the trigger on a hw97k from AoA. They are going to ship it with a vortek pro guide 4 tuning kit installed. I ordered a Sportsmatch dm70 for a Athlon Optics 214105: Helos BTR Gen2 2-12X42.

Pretty excited. This should be extreme overkill of a setup for me!!! It will all be here next week. Now I get to be tortured waiting for it.

I am in rather urgent need of some advice, concerning my FWB 300 SU rebuild.. i recently purchased weaver to picatinny adapters for my scope... Im kind of at my witts ends, i have had a heck of a time getting scope rings and now mounts to keep from moving as the adapter mounts are not posted. And the FWB doesn't have a post hole either. Im almost have tempted to get someone to weld a 1\4" piece of steel on the top of the dovetail in the rear... I've purchased at lest half a dozen different ring sets, and they are all cheap aluminum or not tall enough for what i need. Now the adapters gave me perfect height but they move.. getting kinda discouraged and expensive.. If anyone has any ideas im all ears? Please sound off.

Selling my 25 Cal, Impact Sniper Power Block with 700mm barrel and 580cc tank. Included is a speed loader, 25 shot magazine, case, bi-pod, sling, single shot loader, slug barrel and 8 sealed tins of FX 25.39 gr. pellets. Currently tuned for 25.39 gr, pellets shooting at 920 FPS, and getting over 175 shots per fill. Scope and mounts are not included.

Fantastic shooter. I hate selling it, but I just don't use it enough to justify keeping. Sale price $1750.

Looking for a local sale. I am located in Mesa, Arizona.

Up for sale is a FX Maverick Compact .22 in excellent condition.

Holds air, No mechanical problems.
Includes a Bipod, and Donny Tatsu Moderator.

Scope and rings not included.

1125.00 + Shipping, PayPal FF




hipped, PayPal FF

Don't be this guy

This is just my take on good classifieds etiquette for buyers out there, this thread is a product of me departing from airguns and selling quite a bit over the last few days as I get rid of my airgun inventory, a lot of WTF moments in the last few days lol.


The following is a list of tips to help you people who seem to struggle with the classifieds, as many of you know part of my livelihood is selling things online , so I have quite a bit of experience with this.

1) Read the entire ad before inquiring about an item, this will save frustration and headache.
2) If the seller lists his forms of payments, do not ask if they can take forms of payment they say they cannot, they wrote this for a specific reason.
3) This goes with number 2, do not pout when they tell you they cannot take the form of payment you want to use that they've stated they cannot take.
4) Do not get upset when they won't sell you an item because you cannot pay on the terms the seller listed.
5) Do not say "I'll take it", "Lets do this", "Consider it sold" and then ask more questions about the item (this is arguably the most annoying and frustrating).
6) If you have CONSIDERABLY lesser feedback than the seller, your suggestions on pricing and how to sell are probably falling on deaf ears..... especially after youve shown you are cheap (see number 7) , if they have near 100 positive transactions, mostly selling, they probably are pretty good at selling and pricing, theyve earned this feedback!
7) Don't be cheap, it might cause you to be excluded next time you inquire with said seller


Anyways, its been fun guys, thanks to all who have reached out asking why I am getting out and "where ive been" , I have some family concerns to handle along with travel to do that isn't going to allow me to airgun this year, I will be picking up a powder burner or 2 for shtf and hd and thatll be the extent of my shooting from here on out.

Happy shooting fellas!

Looking for free meal and want something dead.

A trying to use the Search function here to look up custom stocks for airguns .
Had hoped to see lots of nice ideas for a custom stock . Have one or two guns that would by miles high better in a figured wood . Is there any pool resource here for stockmakers ?
Does anyone know somebody that can do a custom stock to order ? Am sure there are still some custom d.i.y' stockers out there .

I’d like to sell my sig virtus pcp rifle. I had it by the back door and my wife moved it into the garage and she said it fell over when she set it down and now it’s not working. Trigger fires fine and everything seems fine so I am not sure what the deal is, but I figured someone on here would like to get one for 1/3 price of new for probably a simple fix. I have loved the gun for squirrels in the back yard since I’ve had it. Let me know if you have any questions.i

Not everything is in the picture, my buddy and I collectes a total of 43 iguanas and successfully removed 1019 iguanas eggs from the ecosystem.

I have my own personal used Stikman / Cascade man fill station combo! New with shipping just under $275, asking $160 shipped.

I dont use paypal it sucks and my feedback doesn't, venmo or zelle only!

I am attaching a link so you can view it to see what its all about, picture is of mine.

Was planning on installing onto my Mk2 Impact slug shooter but wound up putting a 700cc bottle on it instead.

included in this package:

2 - OEM FX 480cc bottles off of my Impacts when I purchased them new
1 - DonnyFL (never installed) dual bottle adapter

I think $350 + shipping is a fair price

Let me know... 847.715.6944

0.177 Leshiy classic with 350mm barrel. Excellent condition, hardly ever shot. Has both the factory shroud extension and plastic baffle, and the DonnyFL baffle kit (currently installed). Both get about the same results.

Digital gauge replaced with standard Wika gauge, but I'll include the digital one as well. I just preferred the traditional gauge.

Currently adjusted to shoot 8.44 JSBs at around 650fps for my backyard, but velocity adjustment is as easy as turning an Allen screw at front of gun.

Asking $900 shipped and insured in the CONUS. Paypal friends and family or add 4% to cover fees. Will also accept a USPS money order. Scope and rings not included in asking price.

Email is tobinwebster at yahoo dot com

Thanks for looking.

Just for interest..... My M3 has been behaving itself lately , so this evening i put 56 consecutive shots ( 2 Mags ,Max i get with my tune ) onto paper at 50mtrs... 3 sec pause between shots
NSA 27.5 .218" @ 1060fps

Not to bad...

For sale: Feinwerkbau 300S. Stock refinished by Steve Corcoran and internals rebuilt by Joe Rhea about 4 years ago. Gun is magnificent.

Right now it has a muzzle adapter from Germany on it as I was shooting it scoped and I wanted a clean look. Comes with Gehmann 522b front and Gehmann 530 rear sights. Prefers H&N Match Heavy 8.18g at 578fps.

Why am I selling? I prefer the shot cycle of the Walther LGR and the Diana 75. I probably will regret selling this as it is the finest 300S I have ever seen. Metal and wood are amazing.

Posting some pictures here, but I have more pics I can share via an iCloud link.

$850 shipped CONUS. Shipped in a hard case. Stock will be separated from barreled action. Gehmann sights as well as muzzle brake included.

I’ve been trying to get my .25 Skout shooting pellets well at 100Y since November, mostly shooting .25 Heavy JSB, FX, Daystate Rangemaster, and JTS. While my groups and scores have been reasonably good, I just kept feeling that I needed more to be competitive at the highest levels for 100Y BR pellet.

I decided to change caliber to .30 and shoot the JSB Exact 44.75 grain pellets. So I swapped out the barrel and probe, then tuned the gun for about 870 fps.

This is typical of what I saw this past Saturday. I still need to shoot more to verify it’s not a one off thing, but I’m hoping I can continue 10 shot groups at 100Y like the below (other groups were similar, especially vertical spread).

What has me the most excited is the vertical spread of approx 1/2 inch, which would easily keep all ten shots in the 10 ring of an EBR/RMAC target with correct wind calls. The stats are also very good with ES of 5 fps and SD of 1.4 fps. We’ll see how it goes over the next couple of weekends prior to the Oregon event.

This is a ridiculously tight, low round count cream puff that I purchased from the original owner. It has very minor signs of use. It has been completely rebuilt with genuine Feinwerkbau buffers, seal and spring on 1/7/2024 and is not broken in with perhaps 50 pellets fired. The original buffers were as good as new and were replaced based on age. It is a later dual spring model and a Beeman import. I have bought, rebuilt and sold 6 of these over the last few years and you just don’t find them this tight. $650 you pay shipping. Paypal F&F or you pay fees.