$1500.00 shipped, Huben K1 plus bug Buster 3-9 red and green Scope, partial tin of Baracuda 18 pellets. Purchased from KrazyCool in 2021 Gun is like new only shot a few times. Great gun very accurate will also include 10 cans (200) JSB Exact 25.39gr $15.00 value/can and 2 cans if H&N Barracuda 18 (200) a $160.00 value

Picked this up new at an Airgun Show 2 years ago when I was shooting springers. It was at the Pyramyd Booth and had a bad spot on the stock about the diameter of a pencil which is shown in one of the photos. I have not messed with it and it is completely stock. Accurate shooter, but is just sitting in the safe and should go to someone who will shoot it. $575.00 shipped CONUS. Feel free to PM me with any questions.

Ordered 4 Tins of 18.13 gr JSB Jumbo Heavies, and this is how they arrived.......in an UNPADDED envelope, each wrapped in a plastic bag, with ansolutely NO packing material in the envelope....I have only sorted 1 tin so far and only about half were good and the others are ok for plinking in the back yard....

Picture says it all!

Need some work though..not very symmetrical

All Jokes aside, we are proud to release our new sniper slugs made in partnership with Corbin Manufacturing!
SKOUT®’s commitment to excellence has now entered the world of slug ammunition for the most competitive of EPOCH® and EVOs® users.
The consistency, accuracy, and quality of the SKOUT® Sniper Slug also makes an excellent choice for the discerning shooter of any air rifle slug platform.
For more information please visit https://www.skoutairguns.com/skout-slugs

Pending payment


Up for sale is an excellent condition FX streamline .22 with walnut stock and included UTG 3-12 X 44 scope. Gun is in excellent condition with only a little rust on the outside of the screws for the scope rings. Gun will come with fill probe, single shot tray and I know I have one or two mags for it as well. Will update when I know for sure. Shoots 18.1 in the 880’s. Also installed a stop nut from cape fear airguns behind the hammer spring screw so it cannot move. The gun is also very accurate with crosman premier 14 gr if you turn the transfer port on medium. It will shoot the crosmans around 750 fps here if I remember correctly. I did not have luck with the crosmans above 800 fps though. On high the gun shoots jsb and baracuda 18 gr excellent. Looking for 650 shipped. Will come with original box.
Forgot: This gun has never given me a single problem. Holds air 100 %.

Can you guys give me an idea of which PCP rifles would work for me? I want one for pest duty at 30-40yards. I need it to be accurate, able to sit totally full of air, and not leak for months. I was looking at the Beeman Chief 2 but then read about leaking problems and I don't want that. I would like to stay under $400 if possible. Thanks to you to all for a great forum!!

Introducing the Avengers Assembled Kit!

These aren't your ordinary air rifles; they're your ticket to becoming a backyard superhero! With four fantastic versions inspired by Earth's mightiest heroes, you'll feel like you've stepped straight out of a comic book and into your backyard range.

-Available Today Only!-

I just modified one in Walnut with a 70MM Fore End rest for bottle. I can modify for other sizes as well.

The cradle is highly adjustable with sliding grip support and threaded wood bolt that also slides to support the stock butt.

All parts that support the rifle are padded with thick leather.

Dimensions: 24x9x8. Weighs about 15-16 pounds.

Cradle has rails to prevent small parts from being lost. I thread the wood bolt (1.25" diameter) myself.

Cradle comes fully assembled with glue and large screws. Extremely durable.


Here you see my 'Air Arms TX200 in the cradle.

Hello AGN:

I'm looking to sell an FX Impact 0.22 caliber 700mm barrel kit w/ STX Superior 1:24 twist rate liner and pellet probe. This barrel was purchased with the intent of having an option to change calibers but ended up sticking with sticking with the 0.25 setup. This barrel has the dual transfer port (a larger rectangular dual slot labeled "S" for slugs and a smaller circular port labeled "P" for pellets).

Price: $250 shipped [SOLD]

I've got plenty of positive feedback here so please feel free to check them on the Member Feedback forum prior to purchasing. Paypal Friends & Family payment is prefered (otherwise, please add 3.5% to cover the fees). Local pickup in the SF Bay Area is available as well.

Thanks!

HI All, I bought a vulcan mk1 or is it gen 4 not sure what it is , from a shop second hand , any information about it would be brilliant ,i can put pics up please atb bob.

It’s the standard length version. $200 shipped to the lower 48. PayPal f&f or zelle.

Hi airgunners, i was recently gifted a wildcat mk3 by a good friend of mine. However im finding that i get what i consider too few shots (1 and a half magazines) and wanted to know if it was possible to switch the cilinder for one from a maverick and turn it into a wildcat bt, ive looked at the exploded view and the parts (cylinder, plenum and dropblock) seem to all fit, but any of yall know?

na

Well, some were not so concerned about it in the past...

Would oxygen tanks be useable (emptied of oxygen and filled with air of course) to charge PCP guns? I can get a bunch of them. I don't own a PCP guns yet, but I might soon.

na

This rifle is in great condition. Low shot count. No modifications to the inside of this rifle. This rifle is regulated. No noticeable blemishes. I originally purchased it as a .30 compact & I then purchased the .177 500mm barrel kit. The .177 barrell is currently installed.

All originally supplied accessories. It comes with:

FX Maverick Compact PCP Rifle
.177 Barrel Installed
6 FX .177 Clips
.30 Barrel Kit Included
2 FX .30 Clips
Factory 300cc bottle
Custom Butt Stock with Mono Stand

Asking - $1500.°° plus shipping. "Reasonable offers"will be considered. May consider trades. Located in Houston. In the Panhandle of Florida for the next week and I have unit with me.

I ONLY SELL AND SHIP IN THE CONTIGUOUS UNITED STATES.

Payments accepted - Cash App or Zelle accepted.







View attachment IMG_1129.jpeg

I have a 4500psi Yong Heng and was trying to decide if I should get a altaros booster pump I plan on buying a 45 min 66 cf tank soon 4500psi I'm having a hard time figuring out if I should get the booster pump or not I know it will take a long time to fill the 66cf tank would the yong Heng be better???

I’ve decided to let my Altaros regulated Air Arms T200 .177 go. It is in excellent condition, shoots and functions as it should. Holds air for just shy of forever. Comes with moderator adapter and Rowan Engineering brass barrel band. Tuned to 12 ft lbs and shooting a 10.5 grain Benjamin at 715fps. Gets about 68 shots before falling of reg. Easy to adjust power from 6.5 to 16 ft. Lbs. very lightweight and handy. Great gun for plinking, hunting and field target. It’s very accurate and would make a great entry level benchrest rig. Fill probe not included. Price is $400 plus $30 for shipping (lower 48). Payment by USPS money or PayPal friends/family.

At my sisters for Easter weekend. My dad and niece wanted to try the 30 yard challenge. Quite fun to watch them choose a gun then battle the wind. Thanks to whoever thought of the 30 yards challenge. I personally never had an interest in it because it was so close. But add some wind and things got interesting with an 18gr pellet.

I am new to the FT world (and to this forum). I have been to two matches, both of which were really enjoyable. I met some amazingly generous people, willing to share guns and ammo, willing to guide me through the rules, gifting me a bumbag and other swag, and so on. That said, I realize it is a competition and often there are significant prizes at stake. Is it bad form to solicit advice from squad mates? I am talking about things like, "how many mils did you hold off? where did you miss that last shot?" etc.

I am in this for the fun and enjoyment, and for the challenge of improving my shooting skills. Regarding the latter, I would like to learn from people more experience and better at this than me, but don't want to create any drama or controversy by engaging in taboo behavior. Someone might regard this as giving an advantage to one shooter over another, potentially "knocking someone out of the money".

I have been googling around, but could not find a definitive answer: Has Edgun begun building their rifles in the States, or are they still made in Belarus and imported?

23:35 to 23:60
Solid barrel. Not a liner. So looks like FX has started using solid barrels in their competion grade PCPs.

Liners in sporting guns.

Just scored one in .22 in beautiful condition, including the sights....even the front sight hood. Haven't seen one for sale in a while, but i thought i remember these rifles going for mich more. Some guy has one on ebay gor $1k but i think thats absolutely ridiculous....how did I do?