I’ve been lamenting the lack of rats at the former dairy to my wife. She is currently illustrating a book on woodland rats. Joker that she is, she sent me this via a text.

I have a question for the Crosman CO2 pistol owners out there. I have a 2300S that I've shot 1300 pellets, a couple of weeks ago I noticed a very slight ticking/dripping noise coming from the tube there is no issues with the operation of the pistol it shoots very well. To hear the noise you must put the pistols tube up to your ear its that slight. I contacted Crosman and spoke to a tech and he said that's not normal and stated it might be too much oil. I put a drop of Pellgunoil on every cartridge as instructed per the instructions. The tech advised putting oil on every third cartridge. I've done as he recommended and I'm still hearing the sound . I don't understand what's causing the sound the pistol works fine. I asked the tech what would cause this sound since there is no pressure and he said either too much oil or the spring??. Is there still pressure inside the valve after you remove the cartridge? I wouldn't think so.. He said to send it in and they would check it, I really don't what to go through all that especially since the pistol is working fine. So for all you Crosman CO2 pistol especially the 2300S owners out there have you notice this slight sound coming from the tube after removing the cartridge?? You most likely would have to put the tube near your ear to hear it.

When you first remove the cartridge the tick/drip is about every 2 seconds. The crazy part is I would check it hours later and its still doing it however I would say its every 10 seconds and would progressively get longer between the tick/drip noise until it finally stops but can take up to 24 hours and then you don't hear it anymore. I know I'm being anal about it but inquiring minds what to know???

NightForce Br np-r2 8-32x56 scope in excellent condition, complete with screw-on lens covers, turret caps, sunshade and NF pic rings in worn box.
SFP, 30mm tube, IR Brenchrest scope made in Japan. $875 PayPal FnF or add fees. USPS tracked double boxed

**QD rings in pics NLA- will come with NF pic rings**
Thank you,
Keahi

Sub 12 fpe Air Arms MPR-FT in excellent condition. Bluing looks nearly new with some scuffs/scratches under the muzzle brake which is to be expected. Stock is 100%. No dings or scratches I can find.

Rifle has a Rowan Engineering polished cooking bolt and barrel band. The muzzle brake is an aluminum ldc made by Anthon Storey. Works great and is super slim. Also included I. The original AA muzzle brake and a couple of extra stock butt pad spacers.

This rifle has the standard S4xx/5xx AA trigger blade, and the trigger can be adjusted for travel, weight, etc.

Asking $700 plus 1/2 shipping costs. PayPal friends and family or USPS money order. Or, add 3.5% to total to cover fees.

Please email me if you are interested:
Tobinwebster at yahoo dot com

Hey I just wanted to share this with new airgunners that are considering power vs accuracy in hunting.
I give an overview of rifles, firearms, and power in suggesting a different approach.


Thanks Jaydog.

I have two and selling one. This is an original Wilkins pellet pouch with an upscale nylon rope "fat" strap that's super comfortable. Pouch holds about 200 177 pellets, 100 25s, etc. All good condition

$50 PP'd and shipped USA thanks

I bought a .22 FX DreamTact Compact here at AGN several months ago. Just got around to mess with it a couple weeks ago. The gun came without any mods. I added a Dreamline plenum and changed the tube to CF bottle. My first effort at tuning it got close to 800 FPS for JSB 15.89gr and the 18 gr lower. The reg pressure is at over 100 but maybe less than 110 bar. TP at "med" and hammer spring at 3 with the fine adjustment bottoming out at MAX. Tried a few higher settings without significant improvement. I didn't write them down but I believe I got as high as 160 bar and the velocity was not over 850 FPS. I think 800 FPS at 110 bar is a good balance but keep wondering whether the gun can reach 870-880 FPS with the 18 gr pellet. Of course, I'm saying this with the stock 320mm barrel. It would not be a "compact" anymore if a longer barrel is installed.

Does any of you have a DreamTact Compact (320mm barrel) tuned to run over 850 FPS with JSB 18 gr or 16 gr?

Thank you!

Up for sale is like new in a box element nexus 5-20x50 apr-2d.

$1100 TYD. PP FF or Pay fees.

I'm just finishing up a project and I thought I'd share with the team.

This is my M3 impact it started off much like any other FXM3 impact.





And this is what my impact looked like after about 20 hours of air brushing
















Here is the rifle in the backyard about 20 ft away, this should look pretty good in the desert






And just in case you are curious, here's the paint that was used for the project , it was a mixture of Dura coat

and house of Kolor paint.






Thank you for your time team.

Regards

Tdc

Due to my reasons, I must ONLY use pointed, alloy, light-weight .177 pellets for shooting rats in my backyard. This has caused an issue. With normal lead pellets, i had no issues before.

With these fast, hard pointed alloy pellets, there is no deformation. It just zips right through a rat. And the rat drops dead after about 5 to 10 seconds of running. The fact that I have a small backyard in a populated metropolitan city, this is not good. They and hide in a place where i can’t reach and die.

Given that i do not want to, and cant change my ammo. Where would be the most optimal shot placement on a rat, with a pointy, piercing, non-hard hitting, non-deforming, tiny alloy pellet?

I purchased this scope a week ago. Never mounted it. All I did was check the turrets for nice positive clicks, yes. Clear glass, yes. Nice reticle, yes. Can I see the reticle in the woods on 4-5X, no. I have to take my glasses off to see the reticle below 6X. I wanted to return it but am getting jacked around by the place I bought it from so I’ll just take a nice hit and be done with it. Comes with throw lever, 30mm high rings and caps. It’s made by Westhunter. $160 shipped. If this scope came in SFP, I’d buy another one.

Jeffrey Hernández, of Panama, wins EBR 100y Benchrest Finals!

A big congratulations goes out to EBR Pro class winner Jeffrey Hernández. Jeffrey shot an all time EBR 100y high with a 229 7x in crazy wind. Jeffrey is also the first ever competitor to win both Sportsman and Pro…. plus he did it back to back! You’re the man, Jeffrey! It couldn’t have happened to a nicer guy.

Lou

Is afterwards considered air gun talk? (Hope so).

For you old "Poots" like me out there, what is your favorite adult anti-depressant for after the guns have been put away for the day. Probably the Royal Hat for the northerners but what about you southern Gents that have access to the "good stuff"?

I have an FX Maverick 30 cal sniper. I'm using the original FX regulators, but I need more power. The FX regulators are limited to holding 170 bar. That's fine for the 2nd reg at 160 - 165 bar, but I need the first reg to hold at more than 170 bar and FX doesn't make a regulator for that kind of power. So my only option, it seems, is to go with an extra high pressure Huma reg for the 1st reg.

My problem is that I don't understand how the heck I'm supposed to degas the gun. I've been told that in order to degas my Maverick with Huma regs in it (or even one Huma reg as the 1st reg) I have to dry fire the gun until there's no air in it. I'm pretty sure my valve will get trashed that way from being slammed by the hammer with next to no pressure in the gun as the pressure drops.

I did read where some guys degas by loosening their 2nd air gauge. That sounds like a great way to wear out the seal under the gauge.

Does anybody know of a "safe" way to degas a Maverick with Huma regs in it -- a way that doesn't trash the valve or the regulators or the air gauge seal?

grungy

Bunch of pellets I have no use for. Down to one 177 rifle and it prefers cphp.

3 full tins of rws super domes
1 full tin of air arms falcons
1 full tin of FTTs in 4.52mm HS

The rest are open tins, look at the pics to see how many are left of each kind.

Don't want to separate just need them gone.

$75 shipped CONUS only

Usps priority insured

PayPal preferred

I do a crap ton of plinking in my yard with my Atomic XR, because I love to shoot and it’s also a fun way to confirm POI on small, very small targets. The results on target also represent how sweetly accurate and deadly the Atomic XR has proven on pests. That three shot group was shot over two and a half days. One shot each time in varying wind conditions. Yes, I do compensate for wind, just like I do with shots on critters. Afterwards off to pest with “high confidence”…

Looking for a .37-.5l carbon bottle to convert a Dreamline from tube to tank. With the skinny shroud the 480 should fit but not opposed to the smaller diameter bottle. Will also need an FX Valve and bottle adapter if anyone has one laying around.

Thanks in advance!

THESE ARE THE NEW STYLE UTG PRO 30MM HIGH RINGS WITH QUICK DISCONNECT LEVERS 50 SHIPPED REALLY NICE RINGS JUST NO 30MM SCOPES

I just took a 10 yard body shot on this small coyote. It fell over. Reviewed video. As far as the 5 seconds of fame. You will see I killed it with the body shot. Easy.

Now the animal is about 30lbs.small.

Used Nsa 38.5 grain slugs @910 fps. 10 yard shot. Just rolled over and died after a few twitches.

Will process video in the next few days. Maybe include some skwirrel

Airgun is FX impact m3 25 cal

Was a frontal shot. Animal facing directly towards me

I have been working since April of this year with three or four other members of the forum who have been kind enough to test my work. It's been very frustrating at times because progress hasn't been as fast as I had hoped it might be. In order to establish a standard reference moderator I tested a number of commercial moderators, two Donnie's and a "no name" commercial, in addition to sending a couple of dozen moderators to different testers. I built baffles of various types and researched valves. I looked at a whole lot of pictures of silencer guts. I built some of those and modified them and tested them. I have written so much OpenScad code that I am dreaming in code again. Now here we are. A better engineer would have done it in a third the time (or less), but we have arrived.

In the end I chose the stock Stormrider moderator as my reference moderator because it was so surprisingly good. A microphone placed at 3 o'clock, 15 ft away and 4 ft off the ground routinely read 67.5 decibels for that moderator. I tweaked it with a chain saw file (notched the conical baffles) and got it down to 66 decibels and have been using it as my reference moderator since then. My goal has been to build one that beats that.

This section of the forum is littered with threads discussing different types of baffles I have tried, arguing with and getting advice from other members. Special thanks to @MikeVV for motivating me to research microphones and test equipment and @qball, @woogie_man, and everyone else who opined in particular that more baffles wasn't "more better." The feedback from the guys testing has been very important and I'd thank them publicly but I'd rather they step up and take a bow if they feel like that. That way I don't "out" them if they would rather remain quiet.

Just before EBR, while one of my testers was preparing for it, a moderator that I shipped him for a 22 caliber Daystate failed spectacularly due to a bad glue up and a weak design.

I was frustrated and upset and just about ready to quit. Mind you I had been getting good reports but I was discovering that it's very hard to build a competitive moderator at a low price point.

I am happy to report that this moderator exceeds the performance of the stock Stormrider moderator by two decibels and it is easier on the eye!



I tested accuracy this morning.


The moderator is so tight that it required about 70 shots to settle down and shoot groups as good as it does with the stock moderator and the H&N FTTs I am shooting. Generally those are 9 shot groups about the size of a dime at 25 yards, a nickle at 30 yards, and a quarter at 40 yards. The moderator settled in and I adjusted zero. It is going to wear this moderator for the rest of it's life, I expect. Now I am not trying to say these are good groups. I am saying that this is as good as this rifle groups with these pellets. These were shot at 30 yards in a very light breeze.






Now here is the good news:
I am going to build these and sell them, probably on EBay. The one in the image on my Stormrider is a .177. It is very, very, quiet. This morning with my standard test setup. It tested at 64 dB average over 9 shots with a standard deviation of about 1 dB. That is a full 2 dB better than the stock moderator performs. Each will be available in .177, .22, and .25. They can be had with 1/2 UNF printed threads, 1/2 UNF helicoil threads, and the M10x1.0 Stormrider printed threads. The helicoil threads will cost more. I have not calculated that cost yet. Other threads can be made available, contact me via PM if you want me to make a certain thread.

I intend to keep them on EBay to begin with and sell them as I build them, rather than try to keep up with orders. I have sold other items in the past and really prefer to have the unit in hand before I take someone's money. So EBAY ...

I will post information here as to what you should search on when I have the first one up there.







Link to my EBay account.

Ok, let’s not go full fanboy / hater tit for tat as a lot of these posts do. It’s no secret I’m not an FX fanboy, however, I have bought many of their guns. 3 wildcats, 1 streamline, 1 dreamtac, 1 maverick compact, 5 of these have been sold. Now I finally have an impact coming. As with any other gun I will put rounds through and see how the “feel” of it is. My deal is these guns perform smoothly, but always felt delicate in my hands. The maverick compact has a nice place of it’s own, hopefully the impact proves irresistible. Anyways, no one can fault me for not giving FX a chance! Lol!

Testing the waters on trading my 25 maverick for a 22 cal bullpup. Right now I'm open to see what's out there. Pm if interested and we can exchange photos and information

I decided to put the HP SS MAX for sale even though I planned to film another video with it. $475 with free shipping. This gun is brand new, Only used for about 20 minutes to film a review video (shot from the bench), then back in the box. 100% as new. Comes with the standard warranty from the Pellet Shop. Awesome gun! Includes manual, fill probe, original padded box, 2 magazines. Ships well packed and double boxed.

Paypal Goods and Services OK. You can PM me here, email me at [email protected] or call or text me at 360-844-0962

Note: Donny FL Emporer moderator is not included, but if you want to pay the Donny FL price for it I can throw in the apapter for free. The Emporer is .457. The gun will come with the standard endcap (not shown).

I bought an EG2 right at a year ago. Maybe has two mags through it. I have resurrected for dealing with field rats. I've had the valve apart few times and been through all of Edgun West's videos. Valve seems fine now. Original issue was air leaking out during shots. Basically pull the trigger and massive air blast but pellet never shot.

Latest is unable to pressurize the tank. Air is escaping through the power port part. I did upgrade to the CF bottle. No leaks around that.

Mystery to me.

Thought I would ask around about my issue!

Thanks,

Tyler