This scope is in very good condition. It comes with the sunshade, side wheel, scope caps, and the tools to install the caps. $400 shipped

As always at Rio Salado, the wind separated the wheat from the chaff. I decided in early August to stop shooting .22 RD Monsters and shift to .25 King Heavy.

So I ordered a new .25 Daystate Red Wolf HP in Walnut that I named “Bullseye”. The gun is tuned to shoot .25 Heavy at about 950 fps on the Medium Power setting. It is supported by an Accutac bipod, topped by a Vortex Golden Eagle 15-60x scope, and fed by a MidWest Elite Airguns high capacity magazine.

Not one flyer the entire week. Superb accuracy. Two weeks prior to EBR I had a morning with almost no wind. I shot three ten shot groups back to back at 100 yards, and each one could be covered by a quarter.
I also added a PRS lower rail, and a 2.5# brass weight to keep the little jump straight back instead of up.

Plus that Walnut stock is just gorgeous. I know it’s a cliche, but you can buy an off the shelf pellet rifle and compete well at the highest levels as is, out of the box. I lost to a VERY HIGHLY modified FX Crown and a CUSTOM Thomas HP-X. Trust me, those two guns were no more accurate then mine. I lost because those two guys were better at reading wind than me and it had nothing to do with my gun’s accuracy.

Bullseye below:


An interesting factoid. In 2019 when I won Sportsman I shot a 217, and Nicolay won Pro with a 225. This past Sunday, I shot 216 for third, and Nicolay shot 225 for second. Things that make you go hmmm.
I’m case you’re wondering, that 216 was MUCH better than the 217, winds were significantly harder this year…

Forgive me if this has been asked before I did my research and couldn’t really find what I was looking for.

As we all know the advertisement of foot pounds of energy for a giving caliber can be exaggerated by manipulation of faster lighter projectiles and at the muzzle.

Like for example a 50 gr 30 cal pellet gives 93 Ft-lb at the muzzle but at 100 yards it lost almost half of it’s starting energy.

My question is not about projectiles or calibers but actual testing media an average person can utilize for testing.

Squirrel 🐿 pretty much we all know it’s going down.

But what about

Head shot on a Turkey or hog at 100 yards.

What should I use as a testing?
1/4, 1/2,5/8 wood + something behind?
Food can ?
All of this at 100 yards

Up for sale is an FX Crown MKII 25 cal with the laminated stock. This rifle has a proven track record at Extreme Field Target here in Arizona. This rifle will come with a Carm flip out single shot loader, 2 Carm magazines, extended pic rail and the hollow FX moderator plus a tin of JSB 33.95 grain MKII pellets. No leaks and holds air forever. The Crown has a 600mm Pellet A liner.

There are some minor scratches on the stock which are hard to see and photos were taken as best as possible.

Scope, rings, and bipod are not included.

$1200 shipped PayPal F&F NO TRADES

Up for sale is a great shooting FX Streamline in 22 cal. It will come with 3 factory FX magazines, single load tray, installed Huma regulator and a tin of 18 grain pellets which it loves. This rifle was only shot in competition and never taken out into the field hunting.

The scope, rings, and Bipod are not included.

$775.00 shipped PayPal F&F NO TRADES

Hello everyone,

I have enjoyed shooting from inside my shop but every time I needed to work in the shop I had to move all my PCP items to protect them from the shop dust. So I decided to move the Benchrest and all of the PCP items inside my house. I built a wood insert that closed off the lower half of a window and installed a small vertical opening window in the insert. I offset the small vertical window to the right so that the morning sun is now blocked and makes viewing the targets perfect. Now I have the Benchrest, pellets, tools, gun vice, etc. all inside in one location. No matter how hot or how cold it gets, I now can shoot at targets from 10-meters out to 80-yards.

ThomasT

Hi,
Just finished EBR and headed to AoA to pickup a .30 caliber Ghost, first one sold retail i think and launching this week. Basically its interchangable with the Delta Wold, but all mechanical, no electronics. Will post first impressions this weekend, flying back to FL today. Jerry and Linda McGee are driving it back to Tampa along with their new .30 Delta Wolf. This was one of the guns used during EBR and Chris (from AoA) made it to final round with one. More to come.
Steve

I recently got a brand new RAW Chassis Rifle in .22. I’m shooting the JSB 25.39 grain pellets at an average of 940fps. I’m just setting at a solid table with the rifle on an Atlas Bipod. I’m not a competition shooter by any stretch. I plink and shoot birds. This is my best 10 shot group at 40 yards. I’m happy with it

1.- Recrown on the barrel of my Daystate Woverine HP HR. 25 Cal.

I decided to recrown the barrel of this rifle and the accuracy became insane at 100 yards.

2.- Made wider the entrance of the projectile to the barrel of my Bantam sniper.

I change the barrel to my Bantam Sniper HR. 25 Cal about two years ago.

When I tried the NSA Slugs on it, I notice that the last part of the travel to close the bolt was difficult and needed a little push.

I took off the barrel and with a drill, after removing the inside o'ring of the barrel, I made a wider entrance of the pellet/slug in order to get inside loose completly beyond the hole that receives the air at shooting. Then reinserted the o'ring.

Now the closing of the bolt with the pellet is butter smooth.

What is interesting is that the feeling at the shoot changed completly, now the shot feels to flow instead of the típical bang and recoil vibrating.

Accuracy remains perfect.

The talent at EBR this year was through the roof, and the competition was unbelievably stiff. Plus the conditions were typical Rio Salado, winds that never stayed the same direction or speed for more than a couple seconds.

With only a few exceptions, every previous EBR or RMAC winner and top five finishers over the past 5 years was at EBR competing! There was more talent at this match than any previous 100Y BR match in Airgun history….

Selling a 22 brocock commander XR .22
WTS/WTT for a bull pup..
Got in a trade.. shoots nicely and accurately
Shooting the 18th grain jsb @905fps on highest power setting
Shoots the 18 grain at about 780 fps on 2nd power setting
Shoots the 17.5 grain Nielsen slugs well too on hi power..
Comes with 3- magazines
Has folding stock
Has 580cc bottle for lots of shots..
Comes with original paperwork and box..
Asking 950 shipped lower 48 states
PayPal ff
Or trade for a nice bullpup..

600mm with 480cc carbon bottle with ergo tac grip and custom butt for monopod attachment. Come with 1 CARM mag, modified to hold 15 pellets. And some 150ish NSA slugs and 100ish Knockout pellets

also with:
Huma high(dual) flow transfer port
Huma tuning spring
Huma High flow probe and
Human 14.5g hammer.

This gun will shot moa at 100y with nsa 24.8 / .217 flying at 945ish fps. Barrel is standard superior. It also shoot 18.1 very accurate as well.
post: https://www.airgunnation.com/threads/my-first-100y.1259734/

First reg @ 165, 2nd reg @ 135.
PW 7 for nsa @945
PW 3 for 18.1 @930

Gun is in good condition.

For faster response: will be ship out from San Diego, welcome local pick up.
8fi8/876-tutu64

$1150 shipped
Paypal ff or +3.5%

Scope is NOT included. But I do have the below a open options:
Swfa 12x42 $200
Falcon menace ffp 4-14x44 $200

Been watching them as soon as they air. I'm assuming that repeated access not permitted. Right more wrong?
One of the reasons I ask..... new" Cricket semi . With adjustable reg, that should be a terror. Only in 22 now.

Hello everyone...im selling alot of airgun stuff ...it was all prepped to hopefully do real well at EBR ....unfortunately I drove from Ohio and when I got there I got bad news on my wife's grandma and went in and Saw Darren and Lauren...I explained I could not stay family comes first ..and the big hearts they have understood....I also wanted to make sure someone else on the waiting list could get a chance in this great event ....but there is always next year....I hope!!!!

OK now for goodies
1. .30 caliber RAW shoots lights out ...asking $1300 or reasonable offer.
2. Sold.... Pappas one piece benchrest asking $700 or reasonable offer.
3. Sold .... Sightron 10x50x60 PLR (PAID 1499 Right before EBR) asking $800 or reasonable offer.
4. SOLD PENDING FUNDS Sightron 8x32 bought also tight before EBR asking $600 or reasonable offer.
All reasonable offers will be excepted.
Paypal works for me
text me 513-748-7777 with any questions
again thank you

A big congratulations to Mike Bricker and Team Centercut on a great finish in the benchrest at EBR 2022!
Great shooting Mike.

Looking for a deal on a gently used NOTA. Text me if you have one available.
Joe P. (513)348-0014

I’ve been lamenting the lack of rats at the former dairy to my wife. She is currently illustrating a book on woodland rats. Joker that she is, she sent me this via a text.

I have a question for the Crosman CO2 pistol owners out there. I have a 2300S that I've shot 1300 pellets, a couple of weeks ago I noticed a very slight ticking/dripping noise coming from the tube there is no issues with the operation of the pistol it shoots very well. To hear the noise you must put the pistols tube up to your ear its that slight. I contacted Crosman and spoke to a tech and he said that's not normal and stated it might be too much oil. I put a drop of Pellgunoil on every cartridge as instructed per the instructions. The tech advised putting oil on every third cartridge. I've done as he recommended and I'm still hearing the sound . I don't understand what's causing the sound the pistol works fine. I asked the tech what would cause this sound since there is no pressure and he said either too much oil or the spring??. Is there still pressure inside the valve after you remove the cartridge? I wouldn't think so.. He said to send it in and they would check it, I really don't what to go through all that especially since the pistol is working fine. So for all you Crosman CO2 pistol especially the 2300S owners out there have you notice this slight sound coming from the tube after removing the cartridge?? You most likely would have to put the tube near your ear to hear it.

When you first remove the cartridge the tick/drip is about every 2 seconds. The crazy part is I would check it hours later and its still doing it however I would say its every 10 seconds and would progressively get longer between the tick/drip noise until it finally stops but can take up to 24 hours and then you don't hear it anymore. I know I'm being anal about it but inquiring minds what to know???

NightForce Br np-r2 8-32x56 scope in excellent condition, complete with screw-on lens covers, turret caps, sunshade and NF pic rings in worn box.
SFP, 30mm tube, IR Brenchrest scope made in Japan. $875 PayPal FnF or add fees. USPS tracked double boxed

**QD rings in pics NLA- will come with NF pic rings**
Thank you,
Keahi

Sub 12 fpe Air Arms MPR-FT in excellent condition. Bluing looks nearly new with some scuffs/scratches under the muzzle brake which is to be expected. Stock is 100%. No dings or scratches I can find.

Rifle has a Rowan Engineering polished cooking bolt and barrel band. The muzzle brake is an aluminum ldc made by Anthon Storey. Works great and is super slim. Also included I. The original AA muzzle brake and a couple of extra stock butt pad spacers.

This rifle has the standard S4xx/5xx AA trigger blade, and the trigger can be adjusted for travel, weight, etc.

Asking $700 plus 1/2 shipping costs. PayPal friends and family or USPS money order. Or, add 3.5% to total to cover fees.

Please email me if you are interested:
Tobinwebster at yahoo dot com

Hey I just wanted to share this with new airgunners that are considering power vs accuracy in hunting.
I give an overview of rifles, firearms, and power in suggesting a different approach.


Thanks Jaydog.

I have two and selling one. This is an original Wilkins pellet pouch with an upscale nylon rope "fat" strap that's super comfortable. Pouch holds about 200 177 pellets, 100 25s, etc. All good condition

$50 PP'd and shipped USA thanks

I bought a .22 FX DreamTact Compact here at AGN several months ago. Just got around to mess with it a couple weeks ago. The gun came without any mods. I added a Dreamline plenum and changed the tube to CF bottle. My first effort at tuning it got close to 800 FPS for JSB 15.89gr and the 18 gr lower. The reg pressure is at over 100 but maybe less than 110 bar. TP at "med" and hammer spring at 3 with the fine adjustment bottoming out at MAX. Tried a few higher settings without significant improvement. I didn't write them down but I believe I got as high as 160 bar and the velocity was not over 850 FPS. I think 800 FPS at 110 bar is a good balance but keep wondering whether the gun can reach 870-880 FPS with the 18 gr pellet. Of course, I'm saying this with the stock 320mm barrel. It would not be a "compact" anymore if a longer barrel is installed.

Does any of you have a DreamTact Compact (320mm barrel) tuned to run over 850 FPS with JSB 18 gr or 16 gr?

Thank you!

Up for sale is like new in a box element nexus 5-20x50 apr-2d.

$1100 TYD. PP FF or Pay fees.

I'm just finishing up a project and I thought I'd share with the team.

This is my M3 impact it started off much like any other FXM3 impact.





And this is what my impact looked like after about 20 hours of air brushing
















Here is the rifle in the backyard about 20 ft away, this should look pretty good in the desert






And just in case you are curious, here's the paint that was used for the project , it was a mixture of Dura coat

and house of Kolor paint.






Thank you for your time team.

Regards

Tdc