I'm looking for The Warcat Wildcat MKII .25 that Utah Airguns were putting these out for a while a couple years ago. Anyone have one they would be willing to part with.

Well, I was ticked because of my mishap yesterday with my circular saw, so I just setup some 2x8s and three pieces of plywood in the garage to plink at. Tacked the first target up and started sighting in. I'm not really sure what range I should be shooting the P-17, but I started sighting in at about 10' or 11'. With no true backstop in place, I wanted to be certain I didn't shoot up the storage totes behind the wood. LOL! Once I was satisfied I had it pretty well zeroed, I moved back to 17'. That should be pretty close to a 5 meter range. I ended up putting 50 to 60 rounds through it. My last 5 were at a fresh target to see how close I was to being zeroed. I was using a Short Range Sight In target I downloaded off the 'Net and printed out. Of the 5 rounds I fired at the fresh target, I had 4 in the red and one that I'm positive I flinched on. That's a problem I have to work on. I have nerve damage that causes some loss of feeling and strength in my right arm/hand. It also causes a flinch that happens when I try to do tedious stuff. If I get really relaxed, it won't twitch on me, but I know I tensed up on the last shot I fired and I did flinch. So, throw that one round out and I had 4 in the red. Not too bad for this gun and a quickly thrown together type of shooting range in my garage. I definitively have to figure out a better situation to shoot in the garage.

As for the P-17, what a blast! It's a real pleasure shooting that thing. I took some of you guys' suggestions and used a rag to close the thing. I also quickly got into the habit of placing the gun on my thigh when I closed it up. Between those two things, it isn't too awfully bad to load it and cock it. Yes, the trigger seems to be very nice for a $35 gun. I can say that for sure.

I did run into one little glitch and I know how to resolve it. After the first 6 or 8 shots fired, I started having trouble getting the pellet into the barrel. It was as if the skirt was too big. It didn't want to slide in place very easily. I had to really push to get the pellet in. I switched to the pointed pellets and didn't have the same problem. Right now all I have is a cheap sampler pack of Crosman pellets. It has flat, pointed, and hollow points in it. It's not even Premier pellets. I got them given to me with the 1377 I got. I expect if I order some better pellets I won't have the same problem.

But, the gun performed perfectly and I got to spend a little fun time with no cell phones and nobody around to bother me. A nice way to kill a little time on a rainy day!

SPF!! this is a left hand FWB300s that was imported by Beeman (San Rafael address). Excellent working condition, shoots and functions as it should. I had a scope mounted on it and was using it for indoor 50ft target shooting. Using 7.33 JSB RS pellets it is super accurate. Averages 643 fps. It started to drizzle as I took photos so there are a few water droplets. Price is $550 shipped OBO to the lower 48. Payment by USPS money order or cashier's check. Drop me a PM if you are interested of have more questions. If you want me to call/text include your cell number.

So I get this certain species of ground bird in my yard that likes to destroy my Bonsai tree's and I eliminate them on the spot. I heard a pair of them out back this morning so I went outside with my little bluetooth speaker and played a few calls and the male came in. I pointed my new FX Impact M3 22 cal Compact at him, aligned my crosshairs, squeezed the trigger, and BAM, hit him dead in the chest with a 15gr Hades! A poof of feathers the size of my fist came off of him upon impact but the little sucker didn't die. He calmly hopped to a lower branch and started singing again. So I hit him again right in the chest with the same result and man, still not dead. I repeated 2 more times with the same result before he finally went to the ground but wasn't dead. This little dude was hopping around on the ground after being hit 4 times in the chest with Hades out of my M3 as was still alive. I walked over to him, he looked me dead in the eye, I looked at him back, put the rifle right up to his head and that was that.
Have any of you dealt with a zombie pest before lol? I got his little girlfriend a couple hours later and 1 shot in the chest was all it took.

Sold Pending Funds! I really, really hate to sell this but I have had some life issues come up. What makes it worse is that I just got it back from having Tim McMurray upgrade it. Tim completely went through the rifle, tuned it, rebuilt the regulator and added a second sequential regulator! Standard deviation is only 3.6 FPS! This rifle is currently set up for light varmint class (or WFTF field target), but is adjustable and can also shoot heavy varmint. The barrel is a brand new Lothar/Walther slow twist poly and it is amazingly accurate with 8.4gr JSB pellets and averages 778 fps. Price is $2400 shipped OBO to the lower 48. Scope, rings and bubble level are not included. Payment by USPS money order or cashier's check. Drop me a PM if you are interested of have more questions. If you want me to call/text include your cell number.

Hello Airgun folks!,

MORE FX AND EDGUN AIRGUNS AVAILABLE.

SORRY NOT ACCEPTING TRADES AT THIS TIME.


***FX IMPACT 30 SNIPER..... BRAND NEW $2100 SHIPPED! THIS IS A POWER BLOCK VERSION! (I HAVE TWO OF THESE)




***FX MAVERICK 30 SNIPER...BRAND NEW $1700 SHIPPED (I HAVE TWO OF THESE)




EDGUN LESHIY2 .25 SOLD! SOLD! SOLD!




***USED .22 CALIBER M3 LIGHTLY USED. VERY GOOD CONDITION. POWER BLOCK $1700 SHIPPED

Thanks everyone for the choosing us when considering your next airgun purchase! We really appreciate your business!

***Free shipping to the Lower 48***. All other shipping locations will be quoted separately if needed. For Sale in the USA only.

Payment type accepted are: USPS money order, Paypal (you must pay 3.5% fee, unless you choose to pay via friends and family). ALSO, NOW ACCEPTING VENMO & CASHAPP. ZELLE ALSO ACCEPTED.

If you have any questions, REQUEST FOR PICS OR MORE INFO, please contact us via email or call:

[email protected].... phone: 971-301-4080 (please leave message/text if no one answers)


If you need tuning services or repair for your airgun please feel free to contact me!

971-301-4080

PRECISIONPNEUMATICPRODUCTS.COM

***SOME OF THE PICTURES ARE GENERIC, HOWEVER WE ALWAYS TRY TO UPLOAD PICS OF THE ACTUAL RIFLES OR PRODUCTS. MOSTLY NEW RIFLES WILL BE GENERIC PHOTOS. YOU CAN ALWAYS REQUEST PICS OF THE ACTUAL PRODUCT LISTED. WE USE GENERIC PICS FOR CONVENIENT POSTING OF ADS.

Got this as part of a trade, unfortunately I do not use fixed power scopes. Great little scope. Clear glass and tracks great!! Rings included. 299.00 new but I am willing to let it go for 215.00 plus shipping.
PayPal F&F or you pay the fees. Thanks for stopping by.

RWS Superdome .177 Field Line 8.3gr Amazon 300 for $4.46.

Have a RAW .30 shoots lights out

Asking $1300 shipped
Text with questions Jim 513-748-7777

Like New conditions. Total running time less than 8 hours. Excellent working capabilities, can easily reach 5000psi. Top off 100 cu ft Great White Tank from 200bar to 300bar around 15mins. Come with brand new factory accessories and maintain parts.

Many thanks for several members PM. This is an original Yong Heng Unit, not any copy. I ordered from authorize dealer and double confirmed with the manufacture. I talked to the brand/manufacture owner several times. He is the designer of Yong Heng compressor as well.

Local pick up only, location CA 91709. No trade, thank you!

I recently purchased this HW100 from a collector. Has seen very minimal use. It's serial number shows it to be made between 2012-2013. What sold me was the uniqueness of the stock. That's where my question comes in. I have another HW100 in walnut. I can only find that these were offered in walnut or synthetic, yet this one is in tiger maple !! Putting it side by side with the walnut stock, it's is identical! All the cutouts, fingertip reliefs in the forest oak, every notch, everything. I can't find ANY name on it to indicate aftermarket or OEM. Seller is getting up in years, and memory fails him. He thought it may have been a limited edition that was won in a contest back then? It is SUPER nice, but it's history evades me. Any help or ideas ?? I have NEVER seen another like it... thanks.

I bought a tuxing 6.8 liter bottle from amazon for $297 https://www.amazon.com/dp/B09CPRRLGY?psc=1&ref=ppx_yo2ov_dt_b_product_details it says manufacture date 9/22 so in 9/25 should I hydro or wait 5 whole years it says retest period 3 years but I see some people dont worry about hydro for 5 years on these bottles, Im not trying to go out like a taliban in my room an have my arm shoot thru the neghbors window. .

Just got this in and I’m not impressed with the smoothness of the pellet loading so I’ll keep my dreamline. Comes with extra magazine as only one was supplied, side magazine holder and Arca rail. Settings are as the gun came. $1550 shipped. Came from overseas. Not interested in trades. Also there is no plug for the fill port unless it is loose in the case somewhere.

What's the avg price spent for a EBR rifle setup. Rifle, scope, rings,bipod..etc

Just curious

Love seeing all the players. Noticed very few " big name " players in the money. ( that I see)
Did they show?
Anxious to see the winner/ rifle/ caliber chart.

Only a year old .25 DL in a Aeron FT stock (laminate grips) with counter weight and 2 pic rails one underneath and one on the side. UTG 4x16x56 scope with Donny FL mod and 2 10 shot Carm mags so you can use lower mounts. It's a great setup only selling to fund another purchase. $1,400 shipped. PP FF PM me if interested. Thanks.

Figured I'd show some love to my Concept XR 22 cal. Been wanting to dress it up for a while and finally got the chance yesterday. Vinyl is Mossy Oak Terra and the shroud and grip is plasti dip camo tan. Didn't realize how much the vinyl has a green tint to it compared to the dip. I may change the dip to the dark green??? Let me know what you guys think! Would also like to see what others have done to there Concept XR's as well...

View attachment 20221010_164008.jpg

View attachment 20221010_164023.jpg

View attachment 20221010_163952.jpg

This is an oldie probably made around 1900 plus or minus 20 years. It was made in Belgium by Jean Marck a family business.
It’s gem type which where very common in that period. The Demi-Tier which I think translates to half shot was a target special, featuring adjustable sights and the target stock.

Gems were sized 1 to 5 and got bigger and more powerful as you go up in numbers. This is a number 2, quite small and all Demi-Tier’s were .177




The gun was found by a dealer who thought he was receiving only Belgium shotguns from the same period from a deceased estate.




It would have been used for indoor shooting shooting competitions and Bell target.
It’s a lovely little gun to shoot and accurate!

Vote for one of these two Options. No comments please just vote (1) or (2)

1. Rules ........ Any aid or position you can use in the other AFFTA classes would be Legal at 12 ft lb.

2. Rules .......... Any aid or position you can use in the other AFFTA classes would be Legal at 20 ft lb.

This poll is only for concenus for what direction the unlimited class will pursue.

I was going to keep this as a back up gun to my TalonP just because of how it looks, but it is just too different of a gun to shoot.

Would like to work a trade on either another TalonP or a Hw50S or 30s.

Haven't done much to it (other then the stock finishing) I did cut the spring back to get a much better shot string. Right now it's set as follows:

TP full open - 13.4 JSB - 880fps
TP 3/4 - 10.5's at 925fps

Has 3 mags and the Buckrail Scope Rail/Shroud bracket.

Message me if you have a trade, or make an offer to buy. Depending on the deal the scope could be included.

Hi. I recently picked up a used (leaky!) Vulcan 3. Can someone please share the manual with exploded diagram and parts list? I have emailed AGT a few times but no response

Thanks in advance!

Need one for a friend. Thanks. Urgent BUT not in a hurry to buy!

About 2 years ago (maybe a bit more) I shot in my 1st & only competition in Temecula. I shot a respectable 247 considering I was using a gun that I'd never shot before (Centercut's .22 Streamline) & came into my hands 10 min before we started shooting! Also there that day was Pesty3782 (Tony P.) & his wife Barb (5Pwr), shooting at her 1st ever competition. I had fun but it just didn't "call" to me. Last night I got a text from Tony saying Barb took SECOND in Sportsman's class at EBR!!! WAY TO GO BARB!!! I'm blown away & proud of Barb & Tony's commitment to & progress in FT shooting. Great people to have gotten to know & hunt/hang with. I do feel a sense of pride in THEIR accomplishments (Tony placed 8th in that same category) & I'm so happy for them both!!! Congrats my friends!!!

WHERE can I find a posting of all the EBR categories & the people who shot in them? (Or have they not been posted yet? ) How much was the registration cost this year too?