Gorgeous GRS FX Crown Mkll 25 caliber with tons of extras.
This is my third Crown (the second one I've built). Currently set up as a benchrest competition gun, it comes with two completely custom assembled barrels. These barrels are a 700mm and a 600mm and are of the traditional FX steel barrel, liner, shroud configuration. Each barrel is complete so that all one needs do is drop in the new barrel and you're ready to go. The gun is currently set up to shoot JSB Match Diabolo Exact King 25.39 grain pellets at 915fps for the 600mm and 920fps for the 700mm (same tune for both barrels). Below is a list of the all the extras that come with the gun although the gun is currently fully upgraded with the latest of everything available that I have found works well for it's current tune. The trigger is a match grade trigger which is currently set for a very light 2 stage, 11oz break. The extra stock is a synthetic stock from my original MKI which was previously broken and subsequently repaired and customized to allow the gun to be tuned without removing it from the stock.

$2150 delivered to anywhere in the CONUS.
No trade offers please, I'm selling in order to fund another purchase.

You may contact me directly by phone or text at (513)348-0014
or via direct email at [email protected]

The follow is a list of everything that comes with the sale. Scope, rings and level are NOT INCLUDED.


FX GRS Crown .25 Caliber MKII Custom Build

* 700mm custom barrel system – liner/shroud/cone 8 cap/steel barrel/barrel nut/CF liner sleve
* 600mm custom barrel system - liner/shroud/cone 8 cap/steel barrel/barrel nut/CF liner sleve
* 580cc CF bottle
* Saber Tactical Picatinny bottle clamp
* Black Arts Design barrel band.
* 2 CARM 14 round magazines
* 2 FX Sideshot 16 round magazines
* 2 CARM single shot loader trays
* 1 used AMP regulator with extra piston and Bellville washers (extra part)
* 1 previously installed HUMA High Power Regulator – fully assembled and 100% (extra part)
* extra valve parts (seat – stem)
* 1 Original transfer port (extra part)
* 1 HUMA high volume transfer port (extra part)
* 1 previously used but reconditioned hammer (extra part)
* 1 new hammer (extra part)
* 2 complete o-ring/seal rebuild kits (extra part)
* 1 original power wheel (extra part)
* 1 fill port cap
* 1 original .25 caliber probe (extra part)
* 1 HUMA .25 caliber pin-probe (extra part)
* 1+ set of Ultra-Light barrel parts (extra part)
* 1 Customized synthetic stock – previously repaired – 100% functional
* 1 Plano Hard Case

.

I’d been meaning to post this for a while for reference to members new to target shooting sports. This topic has come up in several discussions in the forums, but I don’t recall reading or seeing any source materials presented to support claims that have been posted. Enjoy the article. It is short and to the point.

Up For Grabs

Nice Cricket .25 cal , This gun is a straight up Animal!

Gun has
Huma Regulator
Power Plenum
Moderator ( FX Hollow ) works Very well
4 x Mags
Sling Studs
Fill Probe
Spare O rings
Factory 117 Bar Regulator
Bag full of other spare parts
Factory Manual

Has been set up by Derrick W.

Current set up
JSB 33.95 at 900 - 905 fps
Getting 4 mags on a 250 bar fill

Very accurate shooter as to be expected...
Trigger is Outstanding on this gun

Gun will ship in original box and then double boxed

I am selling this for a good friend of mine who has unfortunately fallen on tough times due to illness.

I have the gun in my possession, so you will be dealing with me


Asking $ 850.00 shipped, or best offer

Scope, Mounts, and Bipod Not included

Payment via Paypal FF or add 3.5% for Goods and Services
I can also do Credit Card over the phone


Contact via PM please

As for trade deal, I am wide open, to pretty much anything if it's the right deal. Possibly a Very Nice Springer, Left Hand Friendly??
I will settle up with the owner of the cricket ....
Let me know what ya got...

Kalibrgun Cricket. 25 tuned by Charlie Frear power tune at Georga Airgun, shoots like a hammer, accuracy is well known for these rifles. You can Zap chipmunks at 100yds plus. Includes 4 magazines,fill probe, $250.00 scope is included, walnut stock is nice, loves JSB Heavies but shoots lighter JSB well, Shipped in Plano padded lockable hard case,$1200 TYD. PayPal ff or USPS MO.

I’ve been struggling with sporadic accuracy on my Impact in .22 lately. I cleaned the barrel probably 200 rounds ago. It still wasn’t shooting like I thought it should so tonight I pulled the liner out so I could really check it out. After a couple patches soaked in ballistol and letting it soak then dry patches until they came clean l thought I had it. I held it up to the light so I could see through it and I could see spots. I soaked a patch in Hoppes #9 and ran it through then I scrubbed threw it with a brass brush and these ribbons of lead flew out. Hopefully that’s my accuracy issue. I’ve been shooting nsa slugs averaging 968 fps.
My questions are how do I keep it from fouling so fast/bad and would lubing the slugs help with the fouling without affecting accuracy? Thanks

I'm new here, i'm i welcome?

WTS perfect condition delta wolf .22
Got in trade. Not into electric. 2300$plus shipping.

...Put my proverbial tail between my legs and admit that I said some not overly nice things about the American Air Arms, EVOL Mini .22. some time back.

I got one today.
The bad - NOT cheap.

Ok, now that that's said, that's all there seems to be in that column. So...the good -

1. The first thing that I noticed was the balance and how well it shoulders. Yeah, it's somewhat short, but I've had other guns similarly short that don't sit as well at the shoulder.

2. I noticed that the guys at American Air Arms have done a top notch job in the machining of the details. Had a coupla things apart for a quick look. A VERY big thumbs up to those guys for taking the time to design and to high tolerance work in their machining. I almost fell over when I removed the muffler shroud. NO...other gun that I have (more than a few..) has class 3A threads (none better). By the time that you get two or three full threads engaged, there is NO play or looseness in the mating parts.

3. This class 3A thread continues. And I'd imagine that it continues through the gun.

4. Similar to the threads, the cocking lever is also a nice snug fit, but very smooth movement within the receiver. As is the fit of the magazine. I bought a second, both slide in with the same fit. And yeah, the magazine - While I'm not a fan of the reverse installation of the first pellet, the smoothness of the parts that make up the magazine is again, top notch design and machining.

5. The pellet probe is also well stabilized with the receiver. There's a LOT of guns, that the designers/machining operations, didn't do as well.

6. While I didn't and don't really plan to take the gun any further apart, as I understand it, these guns have fewer o-rings than most high dollar (and probably cheaper too) guns, and they have fewer parts.
As a Test Engineer (before retiring), part of my required duties was to design test fixtures. Each and every part that goes into a Satellite gets "Proof Load tested" in one form or another. Yes, I've even tested nuts and bolts !
One thing that I learned very early in my carrier... It's really easy to design expensive, complicated parts to do a particular job. It's much more difficult to design things...cheap and simple...to do the SAME task, as the expensive, complicated thing.
The American Air Arms guys have done the, well, not so cheap..(!), but very simple, very nicely done design work. A thumbs up the these guys (and girls ?).

Grip changed to suit, fore end hand support added, and looking at a different stock. Don't care for THAT decision ! Loose and sloppy. There's a nice wood one that's made for the AR configuration that I may try. My ACOG sight came off of my Impact, M3 and onto the EVOL Mini. The muffler is a little loud. I may attempt to play with that a little.
I've only put one magazine through it as I don't have any air right now. So pellet culling, and me getting used to the gun, the trigger and all will have to wait a coupla days.

A friend reminded me..."you can't take it (money !) with you". So, I bought one of these EVOL Mini's, so far, glad I did.

Mike

Looking at purchasing this NIB HW35 in .177. I don’t know much about this gun. Seems people like it on YouTube, but I don’t trust them all that much. Thoughts?

I've been doing some testing using different moderators and done testing now its for sale.
$80 shipped Usps money order or cash.

Selling for my buddy, a brand new, never removed from box, air Venturi Hill MKIV hand pump. Brand new, never removed from the box or assembled. Paid $259 plus tax and shipping. Asking $150 plus shipping.
Thank you, Stoti

I have a .22 walnut dreamline for sale. The .22 has maybe 100 pellets thru it . The action was in another stock that someone wanted and this stock has never been used. $950 shipped. Now $900 TYD.

Scope features fully multi-coated optics and dual illuminated reticle, giving you superior light transmission and reticle visibility even when the sun starts to dip below the horizon. This scope is highly resistant to recoil, with a 30mm main tube, a stable coil erector spring, and a locking fast focus ocular bell. The side focusing system allows you to adjust parallax from 10 yards to infinity. Comes with a sun shade, 100mm side-wheel for focusing, screw-in lens covers, and carry case. SPECIFICATIONS: total adjustment range is 66 MOA, adjustment click rate - ¼ MOA, parallax - 10 yards to infinity, reticle colors - red & green, field of view 3x – 33.5feet; 12x – 9.2 feet, length - 14.2 inches, weight -23.4 ounces, tube diameter - 30mm, finish - matte black. Weaver mounts available

ASKING: $250.00 PayPal (friends and family or postal money order)

Anyone experience this. Say you set your reg pressure to 140 bar. When the bottle pressure is fill to 250 bar, the reg pressure will be 145 bar. Shoot a couple shot, bottle pressure now at 230-240 bar, reg pressure will be about 143 bar. When bottle pressure gets to 200 bar, reg pressure will be about 140 bar. And keep shooting, bottle pressure now 150 bar, reg pressure will be like 137 bar. I thought the point of the reg is to keep pressure behind the valve to the set pressure until bottle pressure falls below reg pressure. So shouldnt the reg pressure be 140 bar, even when bottle is 250 down to 140 bar?

American made big bore pistol. Proven hunter. 3 shots shooting at 170 fpe.

Pistol is in great condition with a few minor blemishes. Blueing is in excellent condition.
*the line above the grip(see 2nd pic) is not a scratch it is a hair
Comes with genuine 2 stage trigger, Custom grips, one off adapter for at stocks, Boyd’s AR stock, .58 round ball mold, one hundred .58 roundballs, roundball leather pouch, cheap red dot sight

$750 shipped to US. Will ship in a hard case. PayPal or money order

After having a Nomad 2 for 2.5 years and 25 goes on her, after she dies and I tried and I tried to resurrect her with no avail I purchased a YH on Amazon with the 4 year warranty, OMG THIS THING IS AWESOME!!! Filled my empire xs .25 in 47 seconds to 200 bar and 90 cuin ninja to 3000 psi in 6 minutes holy smokes only down fall is it’s loud and vibrates like crazy. Awesome compressor!!

When you try to make your gun to quiet, one must be careful not to effect the point of impact. This set up was a complete overkill and was only a test to see whether too much moderation can affect the point of impact. Yes it does with certain barrels.

MDT NEW VERTICLE ELITE GRIP BLACK 70 SHIPPED NEVER MOUNTED

BRAND NEW donated to support disabled military veterans outdoor recreation therapy group – 100% of sale goes to the group

REPLY TO: [email protected]

177-CALIBER PCP TARGET AIR PISTOL

New in box with $145 LPA IHMSA sight PRICE $325.00 PLUS $15.00 shipping to lower 48

With its German-made Lothar Walther™ precision barrel, the Crossman Silhouette 1701P is designed for silhouette and target competitions where precise shot placement is crucial.

An intermediate-sized PCP pistol, the 1701P is dependable, accurate and provides almost no recoil. The redesigned front sight is infinitely adjustable and complements your choice of a precision rear sight.

The improved trigger on the 1701P features an adjustable, two-stage, drop sear trigger utilizing precision, heat-treated metal components. The trigger mechanism is built with the same materials and precision as the popular Marauder pistol trigger group. Ideal for competition, the bolt is reversible to accommodate right or left handed shooters.

Shooting at velocities up to 550 fps, the 1701P is capable of 50 shots per fill, and meets requirements for both International Handgun Metallic Silhouette Association (IHMSA) and NRA competitions.


Recommended Use:

• Competition
• Target Shooting
• Hunting

REAR SIGHT – Price shown on package $145.00

LPA di Ghilardi billet steel target competition sight

Just checking to see if there would be any interest in a comparison between a FX M3 in 177 vs a Delta Wolf in 177? I already own the FX but just purchased a Delta Wolf from AOA a few days ago. I haven't received yet but pretty excited to see what the fuss is all about. I've never owned a Daystate b4 so this is my first. I could do some 30yrd/ 50yrd and 75yrd groups (backyard range) with each and see how they stack up. The FX has the 600mm and the Delta has a 580ish mm barrel so will be close to each other. Can also do some slug testing and just some overall thoughts of how they compare and function. Hopefully will have the gun sometime beginning next week. If there's something anyone would like to see let me know. I'll post some pics as soon as it comes in!!!

I was walking back home from picking up my niece this afternoon and saw a differently colored groundhog. It was sighted in E. Central Missouri about an hour west of St. Louis. It was a grey with a black tail. It wasn't an old groundhog, looked like this springs litter size wise. I'm constantly amazed at the diversity of creation. All you have to do is slow down and open your eyes. Sorry no picture, didn't have my phone.

Sold pending payment ***

I bought this new a few months ago. It’s a 30 and VERY accurate shooter. $1075 insured and shipped in continental US. I’ve sold lots of stuff here so feel free to buy with confidence. This is only for sale here on the AGN and If you see this for sale elsewhere, it’s a scam. Sorry, but I’m not looking for any trades.

Buying the

Caldwell Precision Turret Rest I am 75 and not too steady - I can group half inch shots with this​

FROM JTS HEADQUARTERS USA,

We have had many unexpected delays due to the World shipping issues and ports being understaffed etc. But we are happy to say the ship is in clear water now and headed to Houston Tx. We will update everyone when the shipment has arrived and is being released to Vendors. We expect the ship to hit Houston early October now that we are clear of all the International problems we have faced. Thank You all for being patient, we appreciate you all and look forward to many happy customers in the near future.