This Webley product seems like it should be great, but it requires three hands to operate: one to hold and squeeze it, one to remove the pellet for loading and one to hold the airgun. That is why it looks new - never used.

Finally got out to the gun club with my new 0.177 cal R9. So far so good with indoor shooting in the basement at 10m. Started today at 25 yards getting the scope (Centerpoint 4-16x40 AO) zeroed. Shot real low, not enough adjustment in the scope to get it on center. It was grouping pretty bad, got a lot of semi-decent three shot groups that were with one or two flyers for each.

I then started to notice a burnt oil smell. Ooops #1 probably should have degreased and cleaned it first.

Then noticed this...

The scope is not supposed to recoil off the rifle is it?? Also everything on the scope was loose although the reticle seemed fine...

I finally got a piece of wood and drove the scope the rest of the way off (Bring hex keys next time too...). Tried the factory open sights next. Pellets were like a shotgun pattern. I am not going to blame an excellent rifle, I was trying to hold it fairly loose and just let it do its thing. I know for a fact i'm flinching when the thing shoots. The recoil is a totally different character to PB's and PCP's. I can shoot a 30 cal PB all day with zero flinch, but thing thing gets me twitching. More practice.

Regarding the movement of the scope mount would locktite help? How do you guys do your scope mounts on springers. My mount is a simple 11mm dovetail mount matching to the factory grooves on the rifle. I was amazed that it moved as much as it did and what it did to the scope. Especially considering I had to work at it quite a bit to drive it the rest of the way off that really speaks to the type of recoil these things have.

Anyways I'm open to suggestions.

Need some help. Got it as a present. 1st one was dead on shot but broke in a few months. Benjamin replaced it with another. The 2nd had bad vibrations and replaced it with a 3rd. The problem is that I can't get this thing to scope in. Will shoot a bullseye, then next few shots, they are all over the place. Any advice on how to get this thing to be scoped in? I like the design, but I can't get this dialed in. Plus, every time I shoot, the scope goes out of focus. Any advice would be GREATLY appreciated!

Hello AGN,

I'm looking to sell a very nice 0.25 caliber Edgun Lelya 2.0 w/ a nicely figured walnut stock, cheek piece, 2 magazines, fill probe, bipod rail, soft case, full o-ring kit and other extra accessories. I bought this rifle from a local seller and it is a great shooter. I had it scoped with a SWFA 3-15x42 scope and it was such an awesome, compact, lightweight and accurate package that was a joy to shoot.

Earlier this year, one of the o-rings gave out and caused a leak. I took the rifle apart to do a full reseal - which I've done before and is typically very easy to do on an Edgun. Everything went smoothly with the exception of one o-ring - which is the large 25x3mm o-ring where the two sections of the plenum connect. The two sections of the plenum are screwed together very tightly and I cannot get them apart to properly insert a new o-ring there. I tried a few times but don't have the strength, skill or tools to disassemble this part (it's the silver part shown in the photos below) so I've just had this rifle sitting unused in my safe for most of this year. Since I haven't shot more than 50 pellets this entire year on any of my rifles, I figure it's probably time to move this rifle on to someone who will use and appreciate it.

This should be an easy fix for someone with the know-how and/or proper tools to get this stuck part unscrewed; putting everything back together is a piece of cake. I will include a full replacement Lelya 2.0 o-ring kit to completely reseal the rifle again as needed. The rifle is in otherwise great condition and will be an excellent shooter for you once put back into action. But please do not buy this if you don't have the ability/tools to replace the plenum o-ring because I won't be able to help you...

Rifle is priced accordingly @ $1,200 + actual shipping to your location.

Local pickup is available in the SF Bay Area - otherwise, payment by Paypal Friends & Family is preferred (or add 3.5% if using PP Goods & Services). I haven't been very active lately but have been on this forum for a long time and have abundant feedback as both a seller & buyer so know that you're dealing with a reputable trader.

Good shape, lightly used, a faint mark on the body as shown.
$95 shipped.

Rifle is in good condition with some minor blemishes. Comes with fill probe, stock mag, and after market metal mag

---

$750 $650 shipped

PayPal, Venmo, zelle, or money order(rifle will be sent once money order clears)

New scope mounted up and decided to go another scope. 350 shipped. This scope is new only mounted

I’d like of trade my FX Maverick .25 cal sniper for something of equal value or something with a little money on top. Scope not included. Scope cam not included. Bipod not included. Has power kit and pin probe from Huma installed.

This is my first time seeing anything about this. Umarex USA set up at a three-day event at the Buffalo Chip Shooting Range during the annual Sturgis Motorcycle Rally 2022 to show case airguns along side firearms and firearm ammunition. Here’s an excerpt concerning GUNFEST from the HAM article linked below:

“It gives visitors the opportunity to watch demonstrations and test out the latest firearm products, ammunition, accessories and more in a safe and controlled environment. The event is free and open to the public. In addition, airguns also will be part of GUNFEST! That’s courtesy of Umarex USA.” Umarex appears to have been the only major airgun sponsor, if not the only airgun sponsor.


For more information about GUNFEST click this link. https://targetprograms.net/

When I looked up the event I read in another article that “Umarex had the largest selection of products for everyone to shoot…” Source of quote https://www.theoutdoorwire.com/releases/39721636-bb0e-49bd-9751-73e651011509

.22 Daystate Pulsar with Heli-board - Gray laminate - Wundergun

I don’t shoot much anymore and we are about to do work around the house so selling my wundergun to raise funds. Excellent condition .22 Pulsar in gray laminate. Heli-board with 12 power levels for ultimate flexibility. Power range is 5-40FPE with JSB 18's you might get a little more fpe if you go heavier, not sure. Excellent condition, see photos. Electronic trigger is a dream. Loves JSBs. 4 Carm mags and single shot tray. If you want to use the old style Daystate mags you will need to replace the actuator pin - they are like $10 from AOA. New style Daystate mags and the Carm mags do not use it. Hard case comes with, it is missing one latch but it does not affect performance. Original electronic board comes with. This is the most accurate and, with a moderator, the quietest gun I have owned. I hope whoever buys this can take advantage of the accuracy and flexibility the gun can offer. $1700 shipped pp / Venmo gift, check or money order with 3-day clear. With the tax rules on PayPal/Venmo goods this is a gift transaction. Check my feedback and buy with confidence. I will also do a FaceTime inspection of the gun if you want. Bipod not included.

LNIB tacti cam 5.0. Extra batteries charger. Box with all the instructions. Just not going to be able to use. 300 shipped POST PICTURES LATER pm for details

if i can't cast it........ and fedex standard 2-day. first its ever been that fast

Having fallen for these air rifles with the use of my HW30 the past few weeks, I'm looking for another rabbit hole to climb into.

I've read all I can find about the two rifles (the 35 and50). That said I'd like to hear how they compare to each other AND the now familiar HW30.

Most interested in their handling and balance, untuned shot cycles and most importantly to me their respective accuracy potentials.

The rifle will be used for squirrel hunting and informal (but serious) target shooting.

Most likely going to be a .177, unless I'm talked into a .22 version of one of the rifles.

Thanks in advance for any and all replies all and have a great weekend!

I mostly target shoot and I’m going back to all .177. So I’m selling 12 factory sealed tins (500 count each) for $225 OBO shipped (U.S. only). Payment by USPS money order or cashiers check. If you’d like to talk by phone or text, PM me your number.

Selling year old Athlon Argos 8-34x56 mead scope for $400 plus shipping includes the eagle vision rings and level

Hello, i’m a bit new. I’ve never disassembled my PCP yet. When I actually get around disassembling it for maintenance, is it a good idea to stick in one of those desiccant sticker inside the air reservoir? The MicroPak stickers found in shoe boxes dont rattle and sticks to a surface.

desiccant sticker would take up very little room, but not sure if they work under pressure. Anyone tried this before? Or any idea if it would help with moisture?

For sale Omega Trail charger 6 months old $800 plus shipping bought a bigger compressor to fill tanks

Sent these three consecutively after work today. Am dog tired, but had to send a few down range. Bipod front, fist and shoulder for rear. Wind from behind my left shoulder about 2-3 mph. Groups 1 and 2, JSB Exact Jumbo 18s. Group 3? CPHPs. Within 50 yards? Small pests don’t know the difference…

Anybody know what happen to "the good ole airgun boys" on youtube?

I can't find any of their youtube vids. These 2 guys were were the best to watch for real "long distance" shooting.

Selling my dad's Benjamin Marauder .22. Rifle is in excellent condition and only shot a few times. Scope is not included in this sale. $325 shipped CONUS. Fastest response is through email [email protected]

Sincerely,
KeithWalters

About 3 weeks ago, I emailed Steve Corcoran (Woods & Water Outdoors) requesting if he could make a laminate stock for the AAA Evol Paradigm. I already have the walnut version and thought it would be nice to pick up a separate laminate stock for it. As some might know, Steve makes the walnut stocks for the Paradigm in collaboration with Tom at AAA and AoA. Steve informed me that he has already started making laminate stocks available in two colors, Green Mountain Camo and Gray laminate.

He had already sent them to Tom at AAA for assembly and informed me that the laminate stocks weren't available for purchase through him and I was told to contact AoA because the new guns with laminate stocks would be sold through them. I went on to AoA's site to check if they listed them for sale but no luck so I decided to give them a call. I spoke with Darren at AoA and asked him about the new laminate stocks and if I could purchase one separately.

Darren informed me that I was the first to ask and said he would check on them. He later came back and said that I could get one and that it would be sold through them and drop shipped from AAA since Tom still had them for assembly and has not sent them to AoA yet. I decided to get the Green Mountain Camo laminate and received it on Labor Day. I'm only posting about this now due to a busy work schedule and I finally had some time to take some better pics.

This is my first Green Camo laminate and I'm super happy with the color combination. Thanks to Steve, Tom, and especially Darren from AoA for working with me on being able to pick up a separate stock. I really enjoy dealing with AoA. Those guys rock!!!

There are various ways to scam people and there are various ways to determine the legitimacy of an ad. I saw an ad that I thought was too good to be true. The person allegedly had done a lot of business on AGN. "Have bought and sold many rifles/scopes on this forum. You can buy with confidence." That is a quote from his ad. He joined June 8 2022 so that is your first warning flag and he has done a lot in that time. ??????????? So I decided to Paypal some money to the email address provided in his ad. Any legit scammer has a Paypal account, right? And so he did. I sent 25 cents to that account. I expected some sort of reply such as "what is this?" "what do you want" etc you know, something. I got nothing at all. You know that Paypal told him that he had money. I am just going to conclude that it is a scam for my benefit. It may not be but I am not going to risk it.

FOR SALE :
Maverick Compact 25 cal. Perfect condition!! Has 480cc Bottle, Slug Power kit installed, Huma Moderator and bag Rider.
Shoots Amazing. Currently slinging JSB Knock Out.
Why am I selling it???? To move onto something else. I did try to trade it but unfortunately that did not work out as planned.
Buy The gun alone for $1,600. which is a fair price considering the advances that have been installed. The Scope and ammo can also be purchased.
Thanks In a advance. call or text 413-834-1925

Sent to me by mistake. I don't have a .177 but do have an unopened tin o JSB Match S100 Heavy Weight .535g. 500 pellet tin. I will put these in the cheapest USPS container and ship it to you if you will do the same for me. In a .22 or .25 unopened tin...the heavier the better. I will respond to the posts in the order they a received. Thanks