Which one for at home use? C4 or C4i I’ve been reading and can’t get a clear idea regarding the best dependibipity. Maybe some other entirely would be better. I’ve been using a JTS and it has developed problems so I would like an upgrade.

Hello members,

This Brocock is like new condition, only shot maybe 100 pellets at the most. Always stay on cabinet for show. I am selling this one simply because I work too much and I have 7 other guns.



It comes complete as from the factory, with one of 11 round mag.

I will give extra two of 3D magazines to make the deal.

It comes without a moderator. Airguns of AZ does not include one anymore either.





I add Huggett with the gun if you like on the deal.

Atlas Bipod, scope, and Huggett no include, but I can sell all together to make cheaper with the deal.



Gun only will be $1,200 Shipped Paypal F&F or add 4% if you want to do business. Money Order/Cashapp/Venmo is fine also. Will ship safely double boxed as it came.



I sold and bought lots stuff here as long time member, you are more than welcome to check my feedback with confidence.






Please contact me:

8zero4 726 zero598



[email protected]

Sziasztok érdeklődnék hogy a 25 caliber. Leshiy 2 be milyen számú jet fuvoka az ajánlott ? Köszönöm

Model: GK1 Mini
Measurement: 26.5 x 16 x 5cm
Weight: 960g
Barrel: 15cm
Cylinder: 49cc

View attachment 580294

View attachment 580458

View attachment 580459

I’m selling a few of my well liked airguns to justify the upgrades of my absolute favorite 52 .25 in a custom lefty stock.
Asking prices include shipping from PA to anywhere in CONUS. I will entertain offers especially if you are east of the Mississippi.

(1) FX Impact MKIII .22 500mm & .357 700mm shrouded heavy superior barrels with .357 Yokozuna, mags, probes, Air Marksman 30 moa rail & extended trigger guard. 4 tins of .357 pellets, 2 packs 68 grain FX hybrids, some good Griffin and H&N slugs in .22. At 100 yards I have put 10 H&N 25 grain .218 under 1” easily with a common Hawke 4-12.
The .357 is good for hard hits at 65 yards or less quietly. $1700 shipped for all.
.357 barrel is shrouded & super quiet. I didn’t even need the Yokozuna but harmonic balance weight differential is easy enough with that system.




HW95 .177 $400 shiipped w/4 tins JSB 8.44
HW80 .20 $850shipped. A recent pro tune 4 tins JSB .15.89
R1 .22 $850 tuned, laminate stock, 4 tins JSB 18.13
RWS TO1 West German 48 .177 $400 2 tins Crosman 10.5
Cometa USC Fenix .25 6-24 Tasco & adj stock, 4 tins H&N 20.14 $350
HW35e .22 $650 nicer hand oiled lighter stock, sealed pores. 4 tins CPHP
FWB 602 lefty $675. Or $975w/Beeman Blue Ribbon 1.5-4 4 tins 8.44 JSB & AA

Pictures upon request. I can talk on the phone. Just ask. I prefer PayPal G&S for buyers peace of mind and ease of transaction. PM me here with any questions and offers.
Thanks.

Mark @ShootingTargets7 just sent an email promoting a flash sale on 1" Superlock Mini Gong targets. Here is a quote from his email...



Mark here with ShootingTargets7

Quick Flash deal for your consideration.

The warehouse crew just found a bunch more superlock mini gongs in the warehouse.

I'm wanting to close that listing out so I am offering these at just one penny each (limit 10) to anyone who's purchased these in the past.

If you have a use for these you can't beat this price. At the time of this mailing there are hundreds left but they won't last long at these prices.

When I learned on here that FX was making carbon air tubes for the
DRS I had to have one. Only ones found are at Europe Air in Spain.
They didn’t have it in 700mm which I had. So said eff it and bought a 500
Was going to swap now and then. About a month later realized thats not
gonna do. Now need a stock and action. After searching, the same Dealer
in Spain had the drs base they call it which is the whole gun minus stock.
So I ll have an extra barrel set up.
The last part…. Stock. The UK this time for a Form stock. Hmmm what’s
this can’t put in cart, can’t choose options sh t. My email was finally replied
to a week later. Shipping problem as in Fed ex decided it was !.??!!%@@ Firearms
ohho boooohoo. I guess the trouble with shipping anything related to guns
is getting world wide bad. You know how private shippers drive cars and bikes
across country we’ll have to come up with a service like that. haaa . I’ll take
one of those driver jobs!!!

400 fps with CPHP, 5m away and target is 1 meter above shooting position. Not sure if keyholing or hanging chad because of angle. Stairwell is only place to shoot without windows nearby.

My micro adjust goes past 5, about a full hashmark past. Is this an issue? What causes it to happen?

I can't find any videos or posts talking about this happening. Is this something I can fix/stop by loosening the set screw ans adjusting the position of the barrel adjuster/wheel?

Hello, I currently have a FX Impact M4 and was thinking of getting a FX barrel tensioner kit for looks mainly. I already use a Saber Tactical top rail and was wondering if there will be fitment issues. Also, I'm using a DonnyFL Yokozuna moderator and was hoping I could still use it with the tensioner kit.

Lastly, anyone with experience kindly chime in if it's more trouble than its worth.

TIA

I put out a feeler looking for a Theoben eliminator in any caliber and with a bit of luck. Within hours I got a reply for said rifle in .20 cal. I’ve never owned a Theoben or Beeman variant or any rifle in .20 . This is exciting. The seller sent me some pics , there are some minor marks from use but it sure looks to be in great condition. We had a conversation over the phone and seller was a true gentlemen . It’s now official I’m done buying airguns for the rest of the year.At least that’s what I told my better half. Reality is I have more than enough springers and now a gas ram. HW30 6 fpe , R9 14 fpe 54 air king pro ( still on the bench ) shooting for 18 to 20 fpe and now a Crow magnum unknown power The others are all .177

Leshiy 2 with 350cc bottle, huma mod 30, and carbon fiber handguard.

3 magazines

athlon 6-24 scope is included

includes all oem parts and box
$1700 PP G&S (no fees) + shipping or Cash and free michigan (maybe northern ohio/indiana) pickup/delivery.


I'm selling this to fund a car so I'm happy to negotiate if it means moving this quick.

I shot this page of 20 targets this afternoon in an Arkansas heat wave. Its 5 shots at 25 yards holding the rifle while seated at a bench. 18 almost a 19th can be covered with a dime ctc. Here's the whole page. No cherry picking here.

Looking to sell my fx dynamic 35cal.. this gun it perfect working order has a 700mm barrel and can put out 220 fpe with NSA 140gr slugs.. don't want to sell but something came up so $1500 and it's yours.. PayPal f&f only
(Scope not included)

I have a new Skout Epoch .30 Caliber for sale built with all the accessories you see. The total MSRP is $4,517 but I'm asking $2,200. This model also includes a .30 caliber Lothar Walther barrel with a 1:24 twist. I will cover shipping anywhere within the continental United States. She hits very hard yet reasonably quiet thanks to the Tesla moderator installed and is laser accurate at impressive ranges. This package will include everything you see below. I also have a new Skout Rear Rest available and can include for an additional fee. Inquire if interested and it can be added in.

- Skout Epoch .30 Caliber PCP Rifle
- Skout 580cc Bottle
- Skout Airguns High Pressure Regulator
- Skout Adjustable Benchrest Stock
- Skout Epoch ARCA Rail
- Skout ARCA Rail Weight
- Skout Tri-Pod
- Skout Tesla Valve Moderator
- Skout Custom Cocking Knob
- Skout Epoch Magazines x2
- Hawke Airmax 30 FFP 6-24x50 SF 30mm, AMX IR Riflescope
- Hawke Match Mount Scope Rings
- Hawke Flip Up Scope Covers
- MDT LRA Send IT MV3 Electronic Level
- Holosun P.ID Tactical White Light with Green Laser
- Cole-Tac Cheat Sheet V2
- Skout Epoch Custom Plano Case
- JSB Exact 50.15 Grain Pellet Tins x5

Just got home from work at 2am. Took a shower, was about to walk my dog, and boom—there’s this huge box sitting at my front door.
Pretty sure it’s not for me. The name sounds familiar, but I can’t remember who it is exactly.
If anyone knows this person, hit me up. Thanks!
(First thing I did was check all my bank accounts and PayPal )

Received a new Krait x from Utah Airguns as a replacement for a returned Krait x. Latest generation. Includes 5 mags, (2 after market). Probe and assorted ammo. It is still in original shipping carton. I will be unpacking it soon to see what might be in the case with the gun. Sorry, no trades. I will be posting pictures in the next couple of days when I get back home. Calling me is the best way to reach me. Thanks, Bill and Addi, I'm Bill. 503-504-708four.

I was never this way back in the 80’s and 90’s with my springers. But I was with my powder burners. And I’ve always been this way with my PCP’s. A stock gun that’s great, I just don’t shoot it much. But am always very satisfied when I do. Some guys can buy this type of gun and burn through thousands of pellets or slugs. That’s cool but I can’t. I'm currently sitting here waiting on a groundhog. Have my RTI with a .30 500mm barrel I machined to fit. Not sitting here with my Taipan. Came home from work today and shot a couple mags out of a Zelos project gun. Shoot it almost every day while the two Uragans sit waiting to only kill something. That project gun that kept improving until I finally got everything right really got me recreational shooting again. My Taipan or Zbroia won’t. First picture was a couple hours ago. Now I’m waiting on a grundy. What type of air gunner are you? I see plenty of serious dudes like @Motorhead suddenly become enamored with a cheap gun turned big project.

I’m shooting at 43 meters on a -5° slope. Target: 20x20 cm card with 5 bullseyes (2 bottom, 2 top, 1 center). Rifle: FX Crown, 700 mm barrel with carbon sleeve and spacers, .22 JSB 18 gr at 870-880 fps, tuned. Setup: Huggett Astille moderator, SEB AR250 front rest, rear sandbag. Wind: 1-3 m/s.


I can shoot hole-on-hole sub-MOA groups on the first (bottom) bullseye after zeroing. However, when I switch to the upper or center bullseyes, the POI shifts, mostly in windage, even though the rifle is steady and grouping well. Could this be harmonics, canting at this distance, wind effects, or an issue with my shooting position/technique?

I had a Custom Delta Wolf Comoact that i loved and like a dummy, traded it off. I woild like to hear from owners of the Epoch Compact. Is it a smooth lever, will it shoot slugs and pellets? Is there a difference in lever resistance when it inserts a pellet or slug?
The Delta Wolf I had was equipped with a 19in LW polygonal barrel and was lights out with slugs and pellets, ut a tiny magazime and a hitch inserting pellets into the chamber whereas slugs were butter smooth every time.

Was trolling my local Walmart a few weeks ago, and in the Stationary section, I found these PERFECT, stick-on bullseyes.

Several hundred (924 to be exact) for $2. Originally intended for repairing holes in paper used in ring binders, these things are awesome for making aiming points on almost anything.

Do you have any suggestions to improve the filtration system of my compressor? I’m planning to get the GX PCP filter, as I don’t have a pressure maintaining valve (PMV) in this setup, and I believe it could help more with water filtration. So far, there’s been no water and debris in my SCBA tanks, FX M3, or the other PCPs I own with this setup. Adding a PMV would be a huge upgrade—though I guess many of us don’t use one. However, when I didn’t have any filters, the oil smell was very strong—now it’s more manageable.
My concern now is that I’m getting a slight oil smell. Can I fully eliminate the oil smell?

CREDITS TO THE OWNER:

Finally back into PCP's by buying a FX Dreamline Lite Compact in .22, i'll post some pictures when it arrives. Its exciting but also scary to spend so much on something that you don't fully understand after being away from the hobby for so long. Hopefully its a good experience. I needed something small and light because i have MS and can't carry around anything heavy.

I have been looking at posts and videos so i can be informed, hopefully it goes well and i don't have to ask many questions. My only concern right now is that i hope its not too loud and i hope its low maintenance. If anyone has any tips or experiences that you'd like to share about that specific platform then please do share, I must have watched at least 20 videos in the last 24 hours but people seem to have different experiences.

CREDITS TO THE OWNER