Hello
I am using DonnyFL RONIN moderator (as suggested) for AEA Challenger .30 32" barrel. The felt inside the moderator is getting pressed to one side after every shot. So basically Supression is working only for one shot.
What am I doing wrong?

Hello !

This is a HW95 in .22 springer new in box . It had a little crack in the trigger base but fixed , see photos . I bought it from AOA for $360 , shipping not included .

After fix it I bought at AOA also a Diana EMS .22 and a Beeman R9 in .177 . These are my main shooting toys , that is why the HW95 has to go .

$360 or best offer , plus shipping . PayPal , shipping CONUSA only .

Thanks !

View attachment 303509View attachment 303510View attachment 303511LIKE NEW 6-24X50 FFP CLEAR GLASS JUST NO NEED FOR IT 250 SHIPPED EBR-2C MRAD RETICLE

Mk2 impact. 600mm 30cal, power block and factory block, Titan 5x25x56, huma slug probe, huma transferport, huma reg, 2 liners both carbon sleeved. Superior and heavy..1 magazine, bullet central carbon tension sleeve, original hard case. $1700 shipped tracking and signature confirmation you can PayPal F/F or add the fee. US SHIPPING ONLY

Hello All:

Just wanted to say hello and that I am looking forward to getting to know and interact with the group. My grandson and I enjoy air rifles and are now looking to make the move from break barrels to PCP. I'm located in the NW FL area and unfortunately not a lot of organized air rifle shooting around that I can find.

Later, Steven

DonnyFL extended quick disconnect - $20

All prices include shipping within lower 48. PayPal F&F or Venmo. No trades, all sales final. PM with any questions.

Hello !

This is a slug kit to make .22 and .25 swaged slugs . The .22 makes .25+ hp slugs with flat base and , the .25 makes .26+ slugs hp flat base and .16+ hp hollow base . Also includes a 2 tons arbor press .

$675 or best offer , plus shipping . PayPal and CONUSA shipping only .


… or $300 for the dies only and free shipping .

Thanks guys !

Hello AGN:

For my bday recently, I treated myself to one of Donny/Saber Tactical's fancy new SCBA valves so I have this extra one to sell. It's Joe Brancato / AirTankForSale.com's TJ3 Slow-Flow Dual Gauge Value w/ microbore hose fill assembly w/ foster quick connect that just came off of my Great White tank. Joe sells the TJ3 valve with the dual gauges for $229.95 here without the fill assembly hose:


A good microbore hose fill assembly will cost you upwards of $150. Also note that this valve comes with a very nice, big 2.5" WIKA 5000psi gauge as well. My price for the entire TJ3 valve and fill hose assembly is: $175 shipped.

I've got plenty of references here so please feel free to check them on the Member Feedback forum prior to purchasing. Paypal Friends & Family payment is prefered (otherwise, please add 3.5% to cover the fees). Local pickup in the SF Bay Area is available as well.

Thanks!

After last weekends take down, the wife and I talked about the recent incline in population of squirrels. We both decided that we didn’t want our deck furniture to become squirrel nesting like it has in the past. So instead of taking them out in one short weekend I figured I would try and make it last by dropping one each weekend. This one was kind of special though because I just got my Pro Sport on Saturday that I ordered on Wednesday night from PA. Threw the Black Hound on it, zeroed it and chrony checked using JSB 8.44. This gun has been a pleasure to shoot, a beast to cock and hasn’t missed a kill zone in my yard yet with the kind of thud I want out of my TX. That would be five by the way and one squirrel. This gun is currently my new squirrel getter!

Decided to punish steel with the .20 cals today. AZ tuned Rapid mkll .20 shooting jsb heavy 15.9 @ 900 fps and Beeman r9 shooting jsb 13.7 @ 710. The .20 has been my favorite caliber for a long time.

Like new Vulcan 3 in .22 with 500mm barrel. Purchased in June. Great shooting airgun, shooting JSB 18's at 900 fps, $1300 shipped CONUS, PP F&F or plus 3.5%, scope, rings and bipod not included, No Trades

When I got into the airgun hobby, I knew diddly-poo. Only thing I understood was which end to point downrange. Well, I decided to credit those that were ever so helpful in educating me in segments of the airgun world. There were many, and I do mean many, members that provided valuable assistance. I will only list The ones that I have gone to repeatedly over the last couple years.
Joe Rhea- Indispensable amount of scope knowledge and insight.
Big Ragu- My FX guru
Derrick Wall- AGT Vulcan and Taipan Veteran advice / assistance
JMahoney / Motorhead - Taipan advice
Steve- AVS , - Information and insight on slugs and barrel twist rates

Many thanks for all your patience and help!

Round 2 of clearing out the closet to make room for PCPs.

1996 20 cal Blue Streak with the tang safety. Great shape for it's age, holds air, and shoots well. Please see pictures for scuffs on stock and barrel. $225 OBO via PP F&F, shipped UPS Ground insured.

Comes with roughly 600 .20 Benjamin 14.3gr pellets.

PM with other questions or picture requests. Thanks for looking!

So I bench shoot mostly and finding the perfect setup for stability is always subject to improving. I have been setting up my Mav Sniper 25 and I have never been a fan of the bag rider. The recoil flips the muzzle up because of the declining angle of the rider and can make the shot rise.
I have always wanted something that is level for the rear bag rest and bingo it is available here.


I love this thing cheap, fits great and works so well, perfect for me. The Mav Sniper 25 with the 700mm barrel can be dificult to keep steady for 100 yard shooting, this makes it a little easier.

very nice STX superlight barrel kit that includes the barrel liner/ huma dual port TP/shroud & probe, and 1 orion magazine. & 1 fx magazine
this is an awesome hunting .25 setup !!
bought all this 2 weeks ago for my MKII crown from UA, all in new condition.
$350 $330 $320 $300 shipped lower 48/conus paypal friends, zelle, or postal money order.

thanks for look'n

Sheridan Silver Streak .20 Thumb safety w Refinished stock, bent cocking lever. Needs reseal and cocking arm. As is $115 TYD usps tracked. PayPal FnF. Thanks
Keahi

Practically brand new
Has American defense quick detach mount
Factory ir light

Has everything, including the rubber eyecup as new, has the AD Quick release mounts not the factory mount.
Brand new, i never installed a memory card in it.
Asking 700 shipped..

Has everything, including the rubber eyecup as new, has the AD Quick release mounts not the factory mount.
Brand new, i never installed a memory card in ti.
Asking 700 shipped..
PayPal ff or cashapp..

I have 32 rifles and I only really shoot one (USFT) so Im selling off my collection. Many of them were generous deals to me so I will be passing the saving forward.

First, I have a Moterhead Huma regulated and shrouded .177 BSA Buccaneer with the longer trigger screw. It has it has been completely gone thru by previous owner, tuned to under 12ftbs. It is an extremely accurate and smooth cocking rifle with the known BSA quality barrel. Perfect for target shooting! Holds air forever. It will come with shroud, 1 Mag, and fill prob, (Scope and Bipod not included). $400 shipped & insured. Paypal F&F or USPO Money order only. I have great buy/sell rep here and on the GTA. I will be more than happy to answer all of your questions and provide more pics.
** Discolsure: The shroud is not fully flush with receiver**

Thank you for looking

Philip

anyone have one ?

***SOLD***Up for sale is this Kalibrgun Cricket Synthetic in .25 power tuned by Charlie Frear at Georgia Airguns. Rifle shoots 34gr JSB around 920FPS and is super accurate...one ragged hole groups at 50 yards.
This rifle is in excellent condition and has been shot very little and never abused. Includes rifle, 3 mags, picatinny rail for a bipod, and fill probe. This was a impulse buy on my part, then bought another item that got my attention so this one has to find a new home. $900.00 SHIPPED

A month or two ago my Wildcat started losing air from where the air chamber screws into the block. I could feel air leaking from that area, so assumed it was something simple like an O-ring. So a call to FX and I got a couple of the O-rings under warranty and ordered a complete O-Ring kit just in case. Fast forward two months and I've been busy doing other things and this evening I decided to finally take a look at it and swap out the O-rings. Changed both the rings in that location and it was still leaking air. Upon closer inspection the O-ring isn't the issue, but I can see a tiny, hairline crack in the threads on the block. Anyone ever had this issue? If so, what could cause such a problem and how was FX about repairing it? I'm kicking myself now for procrastinating in taking a look at it.

I have a raw with power plenum on it it is pushing the 34 gr at a avg of 895 at a 120 bar peek valve metal poppet I will include the old valve also and poppet 2 mags holds air great have a huma reg I throw in with it it is in the chassis because I opened it up for the power plenum and has a rebuilt raw reg installed right now 1200 shipped minus the scope I have the stock also for another 200.00 I'll sell it too it's not opened up for the power plenum though so I would put throw in the blanking plug for it also Paypal fandf

Hello everyone I finally joined the forum and stopped stalking it lol. Hi my name is Nick Flanagan and I'm addicted to airguns lol. It all started about 10-12 years ago I became obsessed with getting the most out of my .25 marauder and i had alot of fun on the journey. My son at the time was only 4 and when me and his mother split my weekends became all about him and airguns slowly faded out of the picture. Mainly because the only time I could get at range was the weekend. Well fast forward 10 years I'm cleaning out my garage and I have to move my airguns. It hit me like a truck as soon as I opened the case. Belive it or not they all still had a nearly a full charge. So I set up a mini 12 yard range in the yard/garage. i looked at the dope on my scope cap took aim and it was spot on. The gun had a 70 yard zero so there was quite a bit of hold under. I was so happy hahahaha so i called my buddy I used to shoot with and we were off to the range the next weekend but this time with my 14 year old son. My marauder .25 and p-rod were still dead on exactly the way I left them. My son and I had a great day he was shooting my p- rod and it was perfect for him he had blast and was hitting targets out at 100 yards. He wrote everything down and learned how many mils to hold at a lower magnification then i had recorded the guns dope with. I was very impressed. Well that was a few months and a few thousand later. I now have an fx impact m3 .22 with 800mm slug tensioned barrel, slug probe, tungsten hammer, airmarksman 30 moa backbone, saber tactical arca rail, element titan, and a poop ton of slugs lol. We have been going to the range and tinkering as much as we can since. I'm sorry in advance for this post and my future post. Im mechanicaly inclined and great at figuring things out. But as you can see typing and grammar are not my strong suit. I type slow and it reads like English is my second language I'm aware lol. Pictures are my collection and target is from the first time I went to range with the m3. I have some slug groups from the last time I went but i did not lable them at the range and not 100 percent whats was what by the time I got home.