** SOLD **

I purchased this Weihrauch HW44 22 cal pistol about 10 months ago. It is very well made and very quiet. The metal 10-shot magazines cycle smoothly with the side lever, and a magazine of test shots with 18.13gn Diablo pellets averaged about 680f/s or 18.4fpe. These pistols are already optimized for the best balance of accuracy and power.

After the HW44 arrived I ordered some custom wood grips for it from Rink-Formgriffe in Germany. One was a target style pistol grip ($165), currently mounted on the pistol, and the other was a carbine style shoulder stock ($265). The original black synthetic grip is ergonomic and functional and included. But these custom wood grips are both ergonomic and beautiful and they allow an easy 2 bolt conversion between long pistol and short carbine.

The HW44 pistol is so well made and quiet that I considered keeping it, but after a few magazines through it I decided that I prefer a semi-auto these days. The HW44 has been stored in a case most of the time I've had it. And now that the wood grips have finally arrived a few months after being ordered, it's time to sell it as a package.

The new asking price is $1,000, which is a drop of $175 over the previous price, and that includes shipping within the continental US. That's less than the cost of a new HW44 without the extra magazines or stocks. So basically, you're getting get the extra magazines and wood pistol target grip and carbine stock for free. It will be very well padded and boxed, I've had hundreds of sales with nothing broken in transit so far.

PayPal only, no counter offers or trades accepted on this one. I need to clear out the things which I'm not using, not collect more of them. I can usually get to UPS within three of days of receipt of payment and will post the tracking info for the shipment as soon as I get it myself.

I'll check the forum messages tomorrow, if you are ready to buy I'll send my PayPal address.

Thanks for looking

Jpiperson2002
Updated 12/7/22

Little squirrel, bad shot. It's been raining for a few hours and I finally gave up waiting it out and was heading to the grocery store. Opened the storm door and saw a squirrel sitting down to eat a pecan in one of my trees, just a couple feet from the one that has been hung up in the tree for a couple weeks. Grabbed the Uragan 22 and just having the knuckles of my support hand touching a roof post on the deck, tried to put a pellet in very front of shoulder, his body was behind a fairly large limb. Made a bad shot, hit him less than 1/2 inch from where I wanted, knew by the sound of the pellet smacking him I hit the head somewhere. The yellow line is about where the tree limb had his body blocked. He dropped straight to the ground and many times was springing straight up over 2 feet high, for over 5 seconds it was like he was on a trampoline. When he stopped I settled in for a second shot and saw he was dead already, no second shot needed. All that springing up in the air, at least 8 times higher than 2 feet, he ended up withing a foot of where he fell. I've seen plenty flop around vigorously but never springing into the air flipping like this guy did, never landed on feet, ass, sides, head, never on his feet.

entrance

exit

This is the latest model of the Evanix Hunting Master (called the AR22). It's regulated and shoots with 40 foot pounds in .22. It's super accurate with FX 25.4 gr traveling around 950 FPS.

This is a brand new rifle delivered to me from Evanix to make a video. Only shot for one day then put it back in the box. This sells for $1349.00

Price $899 + $40 shipping. Paypal Goods and Services OK. You can PM me here, email me at [email protected] or call or text me at 360-844-0962

Will ship with original padded box, double boxed and well packed. Scope not included. Includes 2 magazines, fill probe, manual, padded box, orings.

Finished up a 177 tune for a guy Thursday. 500 mm shooting the fx 10.34. Amazing shot count and accuracy. Was really windy but it shot damn nice and guns really smooth. Sounds like a tuned race car. Think it will be a great field target gun for sure as that’s what he’s gonna use it for.

was looking at cyber stuff lol looking through the list of pellets, see the 14.35gr jsb at almost 28.99 bucks a tin, i realize not a really used pellet like the 16-18 gr but golly gee is that crazy, so i looked around at the other shops to compare.
trenier is 16.99
utah is 20.99
high presure is 20.99
i really dont understand why such a big spread in prices thought there was a limit to map pricing?
i think the people better take hard look as they gotta save what they can as the pellets are getting crazy to shoot.
p-air at 25-30 a tin they sure should have whoever is marketing that place as i sure dont order from them, you get free tin but your not saving nothing

Are there any guns that you regret buying because they didn't live up to your expectations, were prone to failure, bad support, undependable, not accurate, whatever... I know there are a couple I'd not buy again if I had it to do over.
Just curious if others feel the same way and why.

I've noticed that there's been a huge response to the situation concerning "DonnyFL", LDCs, pickles etc., etc. and etc. There's always, though it seems, been a gross misinterpretation concerning "DonnyFL, LDCs, pickles etc., etc. and etc. and the law. I presently own and have owned Air Arms 410Es in .177 and .22 calibers with a shrouded barrels and there's never been a need for "add-ons" to quiet them down? The question, "why aren't manufacturers" designing pcps where there would be no need for "add-ons" to the 1/2 inch threaded end of the muzzle. With todays technology, I'm sure they have thought about it but at the rate things are going with "DonnyFL, LDCs, pickles etc., etc. and etc. and the law", what does the future hold for those of us that have more than grown to appreciate our sport and hobby? Something to think about and I'm just curious!

Yesterday I saw a Daystate rifle review by Airguns of Michigan. His DIY front rifle rest caught my eye. Pretty simple, lightweight, instantly adjustable.

Rsfrid convinced me with his 8 yard .177 hole group thread… I’ve been resisting shooting in my basement for years but had to try it tonight just to see what I could do…

I shot 4 air rifles, my Crossman 760 I bought for nostalgia from my favorite local gun shop that closed up when the owners retired. I grew up in that shop. Trigger feels like the trigger on my Glock 17, actually I don’t think it’s as good. It was still fun though and I’ll keep playing with it. Shot my FWB 124 next after putting the scope on I’d just taken off. I’m not liking my springers much anymore and can’t say I enjoyed it, well it was my least favorite to shoot. Then it was my .177 Marauders turn. It shot well but this is a big bulky heavy gun and the bolt has a pretty heavy spring making it fairly hard to cock. I was resting across a stool while kneeling on the floor. Not a good setup and the Marauders bulk made it worse. I wasn’t going to shoot the Impact but I had too. Man, 25 caliber feels like a cannon in the basement after shooting the three .177’s and the pellets are a lot more expensive. This is where the .22 caliber barrel comes in…

I have an Impact and I don’t have a .22 cal air rifle now. I love shooting the Impact. The .22 pellets are substantially cheaper than .25 cal. My shot count will go way up. I’ll get some slugs for it. A new gun but much cheaper.

I’ll get a 700mm kit because that’s what my .25 is. I’m not getting a heavy slug liner yet, I’ll shoot mostly pellets and try a few light slugs just for the fun of experimenting. Don’t need to nor am I interested in shooting slugs indoors at 20 yards or less but can’t say I won’t be in that rabbit hole before too long. If I didn’t have the Marauder I’d be tempted to get a .177 barrel kit but I don’t need/want another .177 right now.

Is there anything I should know before I get the 22 barrel kit?

A new episode dropping at 8:45 EST

Georgia Airguns w/Charlie Frear is a detailed look at Charlie Frear's business, his methodology, and of course getting to know Charlie while shooting some airguns.

Special guests @intenseaty22 and Richard.


If you haven't already, click subscribe and look for the video tonight! It is 30:01 minutes in length.



@Frear42-_.

FX Dreamline Tactical. This one has 300mm barrel and 480cc carbon bottle. I also have a 600mm shroud, it would just need a liner. Has pin probe, huma dual transfer port, and power plenum. Scope and rings do not go but I do have a SWFA ultralight 2.5-10x that could be added for extra. Nothing wrong with it just wanting to try something different .$1,350

FX 20643 800mm .22 tensioned barrel kit NIB
$400 TYD

Sales Rules:

• I accept PayPal or Venmo - F&F only. Not my preference, but will also do check or USPS MO and ship once cleared.
• CONUS shipping is included in the asking price. Please allow up to 48 hours for shipping.
• I will go based on PM timestamp.
• Please - no trade offers for this sale.

Selling a few moderators today. Both are basically brand new and only used for a few shots for testing.

1 - Eagle Vision Sigma M4 in .25. 1/2UNF thread. Very nice moderator but a little heavier than I prefer.

Price: $125 SOLD



2 - Silent Thunder Ordinance (STO) Pugio with POM end caps. 1/2UNF thread.

Price: $80 SOLD

I am selling my 600m barrel edgun2 that i purchased and have had tuned by Brian @EDgunWest himself at edgunwest(i am local to his shop)
clocks in AVS 65g dish slugs at 850/860 FPS dime size groups at 20 yards easy. Tuned with a fixed regulator set at 150 bars with NO CREEP. I will include the regulator tester in this package deal. I do not recommend shooting pellets, this rifle puts out absolutely too much power for pellets for you to get a straight trajectory but when shot with slugs, youll see why this setup is a pin point slug tack driver. ABSOLUTELY NOTHING wrong with the rifle, never been dropped, ZERO creep, I've baby'd this rifle as the original owner but its time to sell now because i need to funds for another project! ive spent 4k+ easily on this setup and firmly asking for 3000$,

Package Includes
-Edgun Leshiy 2 REPR
-Custom Fixed (NON Adjustable) regulator set at 150bars (this is the current functioning regulator in the rifle)
-REPR Adjustable Regulator (you can shoot pellets with this regulator on lower bar settings, you will have to install it yourself)
-Regulator Tester
-600M barrel + Handguard and MODERATOR
-300M barrel + SHROUD MODERATOR
-Custom AR GRIP AND Factory GRIP
-1x .30 Magazine
-Vortex Diamond Back Scope 24x50 and rings
-Accutac Bipods (REAL NOT FAKE)




-paypal f&f only
-Im up for a local meet up, we can meet at a gun range for a safe and secured transaction.
I'll even let you shoot it before purchasing ! Located in So Cal, Los Angeles County Area.

Any questions feel free to message me
or TEXT me at 626-822-0476
DO NOT CALL WITHOUT TEXTING FIRST OR I WILL NOT PICK UP

Hello everyone,

About a year ago I tried to buy a new rifle from Baker Airguns and things just did not go very well. I got pretty upset and posted my grief here on the Forum.

Well over two weeks ago I was looking for a .177 cal Marauder and found a used one at Baker Airguns on a Saturday night. I decided to go ahead and make the purchase via their website. I received confirmation and shipping information first thing Monday morning. Received the rifle within the week and after a close inspection I decided it was not the gun for me. I called and explained my situation and without any hesitation I was told to send the gun back for a full refund. Here I must add that they expressed much concern and apologized for any and all inconvenience this has caused me. I have to give Baker Airguns a Five Star rating for their customer service.

I also apologize for my hasty decision for making the negative posting here on the Forum. This Forum serves our air gun community in more than one way and it is very important that we all do our very best to maintain a fair, honest and positive support whenever we can.

ThomasT

I was on a conference call, when I saw this guy climb in one of my trees. I strategically placed my computer to the side as I slowly open the window. I took him off hand. I hit right where I was aiming. I always go for the neck, figuring if I’m a little bit high I get the head and if I’m a little bit low I get the CV. Full disclosure, my elbow was resting against the side of the window frame.

This was a big one.

Mike

U.S. Optics TS-25 JVCR FFP IR scope, LNIB, This scope is OOZING with SEX APPEAL, I sold the rifle it was on last March. So I am no longer using it. It is 5-25x with the 30mm tube, Illuminated JVCR reticle. Comes with everything as it would new, Flip up lens covers, cleaning cloth, wrench, quality inspection sheet and manual. $425 (firm for now) shipped and insured to the lower 48. USPS or UPS (buyers choice). Not interested in trades, PayPal preferred. Thanks for looking

So was having a funny poi change out of the blue a few weeks ago, and fought it tring to figure out what was the cause.

Doing all the common hw things to do and same ol results . Like shooting good and out of the blue go 1/2" left then maybe go back good every one or so shots.

Then near my wits end scratching my head bald i picked it up , cocked and loaded snapped it closed and went to take aim and the lolly post was gone...lol

Well well... Lucky i got the stick magnetic and found the lolly post and in 3 or 4 attempt's with different glues and using another unused rectangle post as a new base with got it to stick ( knock on wood) under many shots recoil or i should say so far so good .

Ya, dont guess id ever expect that post to break off like that or it was a defective somehow.

Anyway forgot to picture the glue job lolly post but its in and been testing it out today under this glue job.

Heres the broke insert ring minus the post part..

Anyone else have that happen?

Looking to trade my .30 prophet for a Huben .25. Gun works as it should. I cant get used to the left hand lever. Has a few scratches from hunting on the tube and a little on the LDC adapter. Have only shot JSB 44 grain at 900 to 905 but plenty room to go up for slugs. Looking for nice Huben.25. Message me for any questions or more pics if needed. Only the gun is offered, gun alone unless your trade has same options. Thanks for looking....Mike Will sell $1150 shipped.

Up for sale is a lightly used .25 caliber AEA Varmint Bolt Action airgun.
It was used for a review and one hunting trip. It is holding air and 100% functional.
It will come with a fill probe, 3 magazines, a DonnyFL 1/2x20 UNF thread adapter and the original endcap.
It does have one noticeable scratch at the muzzle end of the shroud from when I originally removed the endcap.
The airgun will be shipped to your door via UPS ground. It will be double boxed (including the original box) and insured.
Price is $500. PayPal is preferred, F&F or you pay the 3%.
PM for additional photos or with questions.

Daystate Huntsman in .177 $1200 TYD

Up for sale is a used .22 caliber AEA HP SS Semi Auto Pistol.
It was used for a review and a few hunting trips. It is holding air and 100% functional.
It will come with a fill probe, 3 magazines, a DonnyFL 1/2x20 UNF thread adapter and the original endcap.
The airgun will be shipped to your door via UPS ground. It will be double boxed (including the original box) and insured.
Price is $350. PayPal is preferred, F&F or you pay the 3%.
PM for additional photos or with questions.

I have been talking to a few airgunners after seeing what happened to DonnyFLs website change recently. Looks like we might be in the beginning to the end of legal over the counter airgun moderator sales....

Hopefully I am wrong and only time will tell, but what do you all think about the ordeal?

Moderator EDIT: AS PER MICHAEL - THIS THREAD IS LOCKED FOR REVIEW OF RULE VIOLATIONS. "Anyone who breaks the rules particularly regarding Firearm accessories and related discussion will receive warnings." -

SIMPLY PUT - DON'T GO THERE (FIREARMS AND ACCESSORIES)

Done

I've purchased a 1st gen .22 cal Maruader, not in possession yet. I've been scrambling for a week on how to power this and thought I could use a free scuba tank which as you know and now I know they can only fill to 3000 and the scba shop told me I wouldn't be happy with it after filling the gun once or twice, so I've decided to buy a compressor. I was originally gonna buy a Tuxing 032 which are 1109 now on Amazon but I think the 031 would work just as well for filling a rifle? I'd be saving several hundred. What else would I need to buy in order to get started with this setup?

I just can't wrap my head around any of these lesser priced compressor's no matter how many reviews I read on them. I'm aware that a real compressor is over 4,000, that's not gonna happen. A first time shooter probably needs that guppy tank but the filling station is an hour away for me!