I have a under lever air rifel and it dosent cock when i open the barrel and push on it to cock it after some pressure the lever just slips from inside the gun where its connected at the spring i check and the place where connect and pushes the metal is king of broken so i want to know what part i have to change

50hrs on unit, just sent in to have it totally gone through and brought up to new condition by Todd who helped design this compressor for AoA, With Joe B alpha inline filter dryer. Still in box from return shipment. Bought a ALKIN so no longer need this compressor. $1500.00 PayPal, split shipping.

My winter hobby is shooting in the basement at 8 yards from a bench with my Weihrauch HW44 in 177. I am determined to get at least one group that measures right at 4.52mm with 5 shots. Whether it's possible or not is not the issue. It's the hobby - gives me a mission for these cold, snowy Northern Michigan days. Anyway, I am closing in on that elusive group as shown below.


The lower left bull is the closest I've gotten so far. I'm using QYS Chinese match wad cutter pellets 8.18 grains. I also use JSB match hand sorted 8.26 grain wad cutter pellets.

I’ve got 3.

I’d like to trade for a 700mm .22/.25 cal (preferable), or a 600mm .25 cal (less preferable BUT LET ME KNOW STILL!)

For even trade with one:

500mm .22 cal barrel kit with probe
600mm .22 cal barrel kit with probe (this one has a few marks on the metal, but it’s nothing serious)
500mm .25 cal barrel kit with probe

If you’re looking to trade for your impact barrel…just keep your shroud and I will keep my shroud and we will just send the barrels+probes without the shrouds. The Impact shroud doesn’t fit the wildcat/Maverick.

FYI edit: Impact probe will not fit in Maverick! So if you have a .25 cal Impact barrel, that’s the only one I can trade for since my probe is a .25 cal.

All are superior liners.

Just came into possession of one. Out of the box , first thing that hit me was how light it was! Felt like 5 lbs. Feels rock solid. Going to have to learn reg adjustment and hammer spring adjustment as well. look forward to shooting it next week, weather permitting.

Hello AGN:

I've got a couple of bipods sitting around that I don't use - one is an Atlas clone and the other a CVLife. Both work well and are in good condition.

Price is $50 shipped...

Trade interests include:
-Saber Tactical Impact ARCA 3 Compact (ST0047)
-Saber Tactical Impact Compact ARCA Rail (ST0023)
-JSB 0.22 18.13g pellets
-JSB 0.22 15.89g Hades pellets
-JSB 0.25 25.39g pellets.
-JSB 0.25 26.54 Hades pellets


I've got plenty of references here so please feel free to check them on the Member Feedback forum prior to purchasing. Paypal Friends & Family payment is prefered (otherwise, please add 3.5% to cover the fees). Local pickup in the SF Bay Area is available as well.

Thanks!

I am new to this and just trying to wrap my head around some of these compressors being many thousands of dollars. Is the Amazon ones around $500 ok for beginners or are they junk?

Does anyone know any places (farms, livestock places, homes) in central Minnesota that need help getting rid of pests? I really want to start a Youtube channel for pest control, but I have no idea how to go about finding people/farmers/owners who allow or need help with such. Now, I can just shoot for fun, doesn't have to be for Youtube. I love those videos of airgunning for rats, ground squirrels, groundhogs, or anything that crawls that drives the farmers nuts.

Any ideas?

AoA just dropped some nice used Airguns today. Wish I was in the market. Figured I share.

A good friend of mine has a son who is getting into airgun’s. Who has asked for my guidance. He also is build he’s own YouTube channel. Together we’re building some content, whether it be good or bad. I said, I would help. He took advantage of the Effecto Black Friday sale. Buying him self a .25 Zeon at a very good price. Being very proud he brought it by and we filmed are first video. I thought I’d share it with with everyone.
Thanks Mont

My dad and grandpa taught me gun safety and how to properly shoot a rifle when I was about 5. I would go hunting with one of them every year for either Whitetail Deer or Squirrel. When I was about 8 my grandpa gave me his old Ithica Single Shot Lever Action .22lr rifle and taught me how to use iron sights.

I remember back when I was about 9 when my dad would hand me a handful of .22lr rounds, grab my single shot lever action Ithica Rifle out of the safe, and tell me to go out and hunt squirrels on the backside if the farm for the day while he worked on a project vehicle. This became the norm on a day that I didn't have school to attend or chores to get done. I remember thinking I was the youngest of my friends to have the opportunity to go out on my own and hunt with a firearm without supervision which was a nice bit of freedom to have!

Fast forward to present day. I am now 32 years old and have a daughter of my own that just turned 4 this fall. She is always outside with me when I am either working around our property or shooting one of my airguns. I patiently waited for her to ask when she could learn how to shoot or become interested in having her own rifle to shoot. So for her 4th Birthday I surprised her with an Artemis PP750 kitted with a Red-Dot and a DonnyFL. She was so excited to have her own rifle! We are working the importance of respecting the rifle and general safety guidelines. I learned that teaching a girl how to shoot is a lot easier than teaching a boy haha. Boys are more of a pull the trigger and listen to the instructions afterwards!

After our first few shootings lessons I have learned that the Red-Dot is a bit complicating for her to understand how to use at her age so I swapped it out with a laser so she can focus on trigger pull and keeping the rifle on target (which works better as I can see exactly where she is aiming at all times). All in all she enjoys shooting and hopefully I'll have a Squirrel hunting buddy in the near future!

(Some might think 4 years old is too young for backyard shooting. I believe it all depends on the child's maturity and willingness to learn)

Proud to have the opportunity to pass on my knowledge that I have gained over the years to my daughter. I hope all you dads out there are doing the same!

Leshy 2 .30 (non REPR) 350 barrel.
1) larger air tank installed/included
2) Valkyrie guard installed/included
3) 2 mags one black one red included
4) 2 mag clips included
5) blackout rubber kit included…not installed
6) custom trigger installed and included
7) edgun west grip installed and included
8) magpul forward grip included
9) scope installed and included
10) edgun west moderator and barrel shroud installed and included
The Donny Fat Boy is not included. Pic to show what it looks like. Comes with factory grip and moderator
This gun is one of my favorite ones. Flawless. Zero issues. I have two leshy 2 guns and the other is my number one favorite.
$1900 FIRM. Zelle or PayPal f/f or +3.5%. Willing to split shipping within CONTUS

Want to trade a .22 500mm impact barrel kit for
500mm .25 Fx impact barrel kit or wildcat mk3 barrel kit .25 500mm


Also wildcat mk3 500mm .30 kit
For
Wildcat mk3 .25 compact kit..

Kits include magazine / barrel/ shroud / probe
Thanks!!

Why do i think of AGN when i listen to this video?

Reduced ..the previous sale fell through..

Selling my nearly new .30 Cal Delta Wolf with all the Extras! I have it tuned to shoot the 44.75gr at about 900FPS! VERY ACCURATE. Cocking lever is currently on the left side and can be easily switched to the right.

Package includes:
Daystate Delta Wolf with Hard Case (valued at $2695)
OMEGA 580CC Upgraded Air Cylinder ($239.99)
PRS Picainny Mount Bag Rider ($62.95)
PRS Cheek Riser ($118.95)
PRS Arca/Picatinny Rail ($221.99)
TWO extra .30 Cal Magazines at ($119.00 each)
THREE Total Mags
Non-slip Rubber Grip Cover
1 TIN of JSB .30 Cal EXACT Pellets

$2250 with free shipping. You will not find a better deal!

You are essentially getting all the above accessories for FREE!

Like new Walnut Crown in .177 $1450 TYD

So are these just for shooting the heavier slugs the regular liner can not handle, or will they also shoot lighter stuff just fine ?

Custom carbon fiber .22 600 mm barrel kit. The outer metal of the barrel was replaced with carbon fiber. It also has a carbon fiber liner and dual port (for pellets or slugs). I added a picture of it in my M3 so you can see the carbon pattern better. $300

Mk2 Impact cocking block, nothing was wrong with it just upgraded to ambi block. $50

.22 600mm barrel, looks like it has pellet port and sub 12 port. Has a small dent and some blemishes. $175

If you want specific pictures of something just ask.

Fx wildcat mk3 .22 compact.
Perfect condition
Shoots the fx 18.1 pellets hole in hole at 30 yds.
-fill probe
-2 mags
-b&t picatiny rail installed
-power kit
- cocking lever


Asking 1100$ shipped drop 1000$!

Text:559-287-9634

In the past I owned two avenger rifles. 22 and a 25. Regret selling them as they were mostly great. The one thing that plagued both pretty badly was a super low POI out of the box. I had to shim scope rings on both to obtain a 50 yard zero. Anyone that has bought a recent avenger notice this problem ?

Donny FL Ronin 22 cal. Moderator

1/2 x 20 thread. Fits FX Impact, RTI Prophet, and Brocock Ghost.

Like new condition.

Used on my RTI Prophet II which has since been sold.

I believe this will work on a 25 cal. but verify that before buying.

Payment via PayPal or Venmo. Shipping included.

Price $175

I thought i remember seeing an Air Gun Show in SE Alabama last fall ? can't find any info now . seems it was near the FLA border ?

We have purchased our own lead wire extruder for our slug machines. We have more capacity than we need for our machines and wondering if people making their own slugs/pellets need lead wire.

We can extrude pure lead wire in these sizes: .166, 200, .222, .264, .327, .430, .470. I can have other dies/sizes made if there were enough people looking for a different size but this is the size I make our slugs with.

Looking to see if people are in need and also if they would need it spooled or wound like it comes off our machine. We of course would hand wind into a smaller box. Our machine is made with a special unwind that lays the wire in a pattern that will not allow it to tangle. You can see how it comes off our extruder machine in the picture below.

It would be a little cheaper if we not have to spool the wire and just lay into a box and protect it with foam or whatever we come up with while being shipped. We only spool for our automatic machines (we spool off the pallet from the wire like in picture) which pull wire off spools but for manual swaging I don't see a need but let me know.

* Reduced price again to $200 *
* What a deal! What is he thinking?
--> Why keep it if I'll never actually use it?

Here are a few unused items left over after the rebuild of an Edgun Leshi y 2 last year. There is a briefly mounted for testing and then removed .30 cal 250mm Alfa Precision barrel, one new .30 cal L2 magazine still in the wrapper, a spare magazine cover plate, and a couple of full 150ct tins of .30 cal JSB pellets: one tin of 44.75 and one tin of 50.15 gn..

The asking price for the items shown is $200 and includes shipping within the US.
PayPal only, no counter offers or trades. I need to simplify my life with less things to work on, not more of them.

Thanks for looking.

Jpiperson2002

Updated 12/17/22

Up For Grabs Is A 2021 Huben K1 25cal. It had a 27in TJ Barrel, And Modded mag From Krazycool.
Currently Shooting VK 32.8 Slugs 1050-1060. It's also really like NSA 33.5.
Dale also makes a 50g Flat nose slug and it also shoots those with nothing but stellar accuracy.
I have the Orignal barrel which will be included. I have all the factory baffles so it is ypur choice if ypu decide to use them. I particularly like it how it's set now with a Ronin on it.
I'm asking $1,300 Shipped. And I ask for the sake of everyones time, If you are not a serious person with no real Interest in buying please to not respond.
Also NO TRADES at this time.
If you want any further information please call or text me at 413-834-1925.
Thanks,
Tony