Only listed at AGN…

Selling my Thomas Field Target rifle in .177 currently set up for 20ftlbs. It has a right hand grip and 18” shrouded barrel. It will come with the buttstock and hamster and the wind flag indicator.

Asking $3,500 shipped. If you want to meet in person, I will throw in some pellets and/or FT targets if you are interested.

Scope and rings are not included at this price, but they are negotiable.

It is an absolute laser. If you miss, it won’t be the rifles fault? Picture is 20 shots at 18 yards.

If interested, I’m happy to talk or FaceTime or send more pics and answer any questions.

The pictures outside are a little older with different rings. The pics inside are with the newest rings as it sits today. Only the rings have changed. Again, scope and rings are not included at this price, but can be made available.

I live on a flood plane and as such the woods in my back yard has a ton of wild life. Is it dangerous to the environment if I'm constantly shooting lead pellets into the ground where all the animals are foraging? Over the years I have unloaded a bunch of tins. Whats the scoop?

No doubt the best part of this hobby is the friends we make along the path. Today I was able to pass this excellent early example on to Fishing43 (Greg Fulk). I love the classic lines and high comb of these older Pro Sports. He is an excellent curator of his guns and will no doubt do better justice to this one than I did. I only replaced the seals and spring. I never did put a scope on it for fear of causing its first scratch. Greg will undoubtably shoot it as it should be enjoyed! Can't wait to hear how it goes.
Cheers.

I'll be making a debut here before too long with an HW97K for hunter piston. Never been to a match -- just watched some on Youtube. Sooo, in addition to hat, sunscreen, water and snacks -- a bucket to sit on and a pair of cross sticks?
Any guidance on cross-sticks beyond "you can't stick them into the ground"?

Today after work i decide to go out to the desert and shot the pathfinder, so here is what i accomplish today, was a bit windy when i arrive and is not an excuse for my bad grouping is just im not a good shooter by any mean and i think the gun in a good shooter hands can perform better.
The gun is as it come out of the box no changes at all
Regulator is set at 160 which i think is a bit to high
I get an average of 50 shots per fill from 250 bar to 160 using the JSB 15.89 grns at 810 fps
So no further do here are some groups at 30 and 50 yards, i didn’t have time to wait for the wind to slow down it was getting late so i just keep shooting
This group is at 30 yards using the 18.13 grains 800 fps, power wheel not on max


This group 30 yards distance 15.89 gr JSB 810 fps


This groups are at 50 yards using JSB 15.89 gr at 810 fps


Was getting late when the wind stop blowing almost for complete and decide to make another quick groups at 50 yards with the 15.89 grains at 775 fps (groups on the orange targets)


Was about to get dark when shot the last groups thats why i just place the targets like that

And here is the toy

Hello to all. I’m looking for some help to ID this airgun. I acquired it about 15 years ago and haven’t shot it much over the years. It’s a side lever springer that shots fairly straight mounted in a beast of a stock that may have been shortened at some time in its life. Just looking for info out of curiosity.

Does anyone know if the Air Marksman's CF bottle with FX type valve is compatible with Western Airguns Sidewinder?

@ 910 fps from the 1-38" twist SKOUT 35" barrel .... Wowzers stacking pellet on pellet at 80 yards when clean shots were taken.
Going up north to blast away at the Belding Ground squirrels next weekend .... Can't wait to see the hurt these BIG .30's can do to the sage rats

That birdie!!

Fx impact 5.5 shooting altaros king 40gr at 965 yd

Fx Wildcat power plenum mk1,mk2 ,mk3 gen 2 SOLD
Fx 2.5 shroud extension 1/2×20 to 1/2×20 SOLD
Fx 3.5 shroud extension m20x1 to 1/2×20 $30 shipped
I have one plenum on my mk1 already and no longer need to silence it.View attachment 346583

I've been reading here, watching Cyclops Youtubes, soaking up buzz with the thought of trying hunter field target piston class. Krale just shipped the HW97K (in .177, 20 foot-pounds) and I am casting about for an airgun-rated scope, probably 6-24, parallax to 10 yards and under $400 -- the further under the better.
If anyone can recommend a scope of this description or close to it for HFT piston, I am all ears. Thanks in advance.

Anyone else besides me have a buck rail suppressor break ? Mine did this morning on my Diana Chaser rifle. I shot about 50 pellets without a problem. I put in a fresh c02 cartridge and first shot, suppressor went flying. Broke of 1-1/2" above the threaded end. It is a fairly clean break. I know that I did not bump the suppressor against anything. I sent an email to Buck Rail and am waiting for a reply.
I was just wondering if any one else had a problem with their suppressors. One thing I do know is they are made with a printer.
Bill

For targets at distance of 100yd and over would a slug of the same weight be any better or worse at accuracy? From what i understand slugs are better at long range but why is it simply because they are heavier and the wind doesnt push them around as much or is there ballistic properties of a slug make it more efficent flying through the air?

Trying to understand if there is an advantage of shooting a slug that weigs the same as my pellets at 100yd +shooting. In consistently hitting salad spoons with JSB 18g pellets so wanting to push it out further..

In using a cricket 2. .22 with a 450mm barel.

It will do 895fps with a 23g slug do I need more or should I snug it down a tad or should I switch to something smaller should I try a 17g NSA slug as well.

Comments amd suggestions please.

I caught this guy sneaking around behind my shop. At 50 yards I put a .30 Hades 44.75 grain in his left eye. He went straight down!

Hello, I am new to the forum. I live in Northwestern Metro Atlanta, getting into field target and hunting. I plan to go to Pyramid Air competition for the first time this year. I collect springers and vintage air guns. I have a HW35E 177 cal with a vortex spring. Last year I shot nearly one hole 3 shot groups at 15 yards. Now geting 1" - 1.5" groups with mixtures of clusters and vertical stringing with 5 kinds of pellets like JSB 10.34, H&N Field Trophy (4.50,4.51 and 4.52) and RWS match. None any good and hard to tell which one is best. Before this trouble, I did a dumb thing and overtightened the barrel pivot screw as tight as I good get it with a big screwdriver. I talked to Airguns of Arizona technician. They said the barrel pivolt screw should be just over tight like no more than 15 lbs torque or less. He was not sure on the manufacturer spec for that. I loosened it to 15lbs and then when down to 8 lbs. Some improvement on vertical stringing but groups still over 1 inch. Air guns of Arizona said my breach seal maybe bad but it looks Ok to me. Gun has about 250 round thru it so far. Tried 2 different scopes and same result. However it shoots good groups with iron sights. Have not dropped it, nor mishandled it and was always stored in case in a dehumidified room. I tried different artillery holds with no good results. Then shot my FWB 124D and RWS 350 and got excellent accuracy so do not think it is my shooting method. As stated, I shot it good last year. Another thing is when the problem started after the overtightening, I had to shim the scope as it shot like 3-4 inches low at 15 yard. Before it was zeroed at that range. I already have a UTG mount to correct barrel droop (10.1" I believe) from last year but still needed shims. Ready to send into Airguns of Arizona for repair. Thought I would post here first if any ideas to try. Also since airgun is out of warranty, if somebody knows a good reasonable place to send it instead of Airguns of Arizona.

How do you guys ship your guns? It seems to me like both I own shipped right in the box they fit in with no outer box. Is this what you guys do? I have 2 I need to ship.

I've seen mixed reports on this topic and I would like to know if you can really damage your gun if you continue to shoot below the set reg. pressure. I know at some point the POA will drop as well

Just saw this on a turkish airgunforum, my god that is a long rifle.

This model hasn't been out yet on the turkish market, i think it will come soon though.

@Asbestos



here you can see the owner of Hatsan doing chrony results. the gun is in 6.35mm


First 5 shots were using Hatsan Slugs 45 grains



Second 5 shots were using 34 grains JSB pellets.

FX Crown MKII .25 caliber Synthetic stock, 500mm barrel, with FX Donny FL moderator, in FX case. Gun is completely stock except the power wheel was changed to the newer version, and is in excellent condition. No muzzle thread protector was received with it as it was purchased with the moderator. Shoots very well with the H&N Barracuda Hunter 27.47gr pellets. Scope and rings are not included. Asking $1185 shipped/insured to the lower 48 states. Payment by Paypal, no fee to me, MO, or check. Feel free to check my feedback.

It comes with 4 magazines and two fill probes in the original box. I bought it from Charlie at Georgia Airguns. It's really like new. Scope and rings not included. If you are interested I will send more pictures.
$1200 shipped or a trade . Charlie has tuned it and it shoots FX 34 grains great. I've never opened this rifle, I've only turned the hammer spring adjuster on the back. It's currently shooting FX Hybrids 980 FPS. It has sat in a case in my safe for over a year and lost no air. It's a great shooter, just too big for what I need. I had intentions of doing bench rest, but life got in the way and that never came to fruition. Now I just need something smaller I can shoot in my yard.

PP F&F or Money Order.


Trades interested in. 22 or 25 preferred

• FX Maverick Compact
• Wildcat MKIII BT
• Something compact

Alright airgun geeks, I need your help with something. What is the equation to figure out how efficient an airgun is?

I've been using this equation but I believe it only gives me how much energy is produced per CC.

Reservoir: 300cc
Total air used: 250b starting pressure – 150b ending pressure = 100b
Total air used x total reservoir: 100b x 300cc = 30,000

Projectile: 25.4g @ 960fps for 47 shots
Ave energy per shot: 52fpe (70.5 joules)
Total energy: 70.5j x 47 shots = 3313j

Total air used x total reservoir / Total energy = Energy per CC
30,000 / 3313 = 9 joules per CC


Take for example another airgun with a larger reservoir, a smaller usable air range, lower shot count, and lower FPE. This results in more energy per CC.

Reservoir: 480cc
Total air used: 250b starting pressure – 180b ending pressure = 70b
Total air used x total reservoir: 70b x 480cc = 33,600

Projectile: 25.4g @ 940fps for 40 shots
Ave energy per shot: 48fpe (65 joules)
Total energy: 65j x 40 shots = 2600j

Total air used x total reservoir / Total energy = Energy per CC
33600 / 2600 = 12.9j per CC


But in my mind the 2nd airgun is less efficient because I'm getting less energy, less shots, less FPE, out of a larger air reservoir.

There must be a different equation to figure out "efficiency".

I tried foam, cardboard/paper, even a whole comforter in plastic. Next one will he’ll be a stack of old t shirts or cotton fabric.

Why doesn't the search Dog work in this section,
and why NO posts on the Dragon fly I and II air rifles?
I have tried everything with NO results.
Tia,
Don