Pristine, Weihrauch HW98K .22 cal rifle.
Includes both the original extended barrel end and an original Weihrauch moderator, a Hawke Airmax 4-12x40 scope with caps and Sportsmatch ring mounts, the original box, and a full tin of .22 cal Air Arms 16gr pellets.
This gun has a gorgeous stock and everything is still tight on it and works perfectly.

Shipped for $750 PayPal FF

Asking 175 shipped for Carbon bottle . Had a buyer for the TM action but have not heard from him in several weeks, so Im relisting this. Action is in nice shape. Set up to shoot wft class. Come with the single air gauge shown by gun not v block shown on gun in pic. Paypal f/f will be fine or pic up. s/n629. asking 1300 plus shipping. Call if you have questions. Thanks chris 859-750-35ten

For sale/ trade is an awesome little bullpup.

Made some modifications like a quick fill port using a standard foster type fill fitting. Had a faulty Pressure gauge, and I've had excellent luck with this procedure on my personal guns.

Just resealed cylinder.

I added a very sturdy rail for mounting a scope.

Moderator included, very quiet and looks great too. The Pup is shooting near factory setpoint, can be made to shoot faster but had no need to adjust power.

Can include a 4x duplex scope for free, or a crosman 3-12 side focus scope w/ rings for $70 more.

I also have other scopes for sale if interested just ask.

Asking for $575 $450

Will trade for ProSport in 177, or maybe a tx200 in 177, or other springers in .20.

Call or text: (Nine16) Five31-2349

Or email: camsprecisionairguns(@)gmail.com

I tossed a Riton scope on mine and am curious what others have done to theirs.. The stock on this is okay, but I wish it was a little darker.

Im looking for a scope for my tx200hc, I mssg “Cyclops” on youtube and he suggested the SWFA 10x42 . I like fixed power scopes but Im thinking 10 power might be a bit much for a springer. SWFA also has a 6x42 SS which I think might be better for a springer. Cyclops says SWFA fixed power scopes are also springer air gun rated . Your thoughts?

***SOLD*** Crosman 2240 bottle gun Carbine .177 Caliber​

Has a match grade 1720T barrel
Fully shrouded with air stripper and 8 baffles. Very quiet.
1500 psi regulator
250cc 300BAR bottle
Stainless fluted hammer
Challenger RVA
Disco bolt probe and handle
Light trigger spring
Smooth, crisp trigger $250.00 SHIPPED

.

Hello All,
I have 2 SIG ASP 20 rifles for sale, this is the second of the two. As much as I love them I have to let go. I recently moved to St.Croix, US Virgin Island and the house I am renting is on a hill by the beach. High winds ,15 to 22 knots are the norm, and calm days are rare and far in between. It's just impossible to enjoy shooting on my backyard range with pellets and I find my recently purchased PCP rifle much more accurate with slugs. The SIGs shine on calm or relatively calm days with JSB hades or AA falcn 16 grains where they can almost put them.in one hole at 40 yards. On windy days though those groups open up significantly and it's driving me insane.. Same windy days my BRK Ghost with fx hybrids will do one hole. So letting these two go.
$1000 TYD insured, in their original box. Can do a bit better if I ship with the action removed from the stock in a smaller box.
Paypal friends ans family or add the fee to pay for goods and services. Shipping from here for such an item insured is around $180 so forgive the hefty price.
Those who know what these rifles are know their worth.
Let me know if you have questions or want to see more pics. Lastly attached a pic of my backyard range on a lovely calm day...

Ok .how are people bending the valve pin.

I recently obtained a GX CS4 compressor direct from GX Pumps. They shipped quickly and it arrived a couple days later, well packaged and in good condition. It came with an assortment of tools, seals, rings, o-rings and springs, so looks like it has the parts needed for a complete rebuild, if needed. Based on other comments here, I flushed the cooling system with distilled water, drained it and refilled with a 50/50 pre-mix of Dexcool anti-freeze.

I ran a quick pressure test and was quite impressed with the speed at which it reached 400 BAR/5800 PSI! It's also very quiet, in fact, it's the quietest compressor I've ever owned and I've had quite a few over the years! Here's a quick video of the pressure test so you can here it running and see how fast it reached it's max capacity:


This is a 4 stage compressor running at a fairly low RPM, yet it makes nearly 10 BAR of pressure per stroke!

After ensuring everything was operating correctly, I filled my LSC SK-19's 580cc tank from 150 BAR to 250 BAR. This fill only took about a minute and the temerature of the compressor barely rose 4 degrees!

I did add a temperature Gauge, not that it's needed with how cool this compressor runs, but I just like seeing what's happening when filling!



Here are some pictures of what's under the hood:



This is the 4 stage compression chamber with cooling fins covering the entire outer cylinder.



This is the 350X motor driving this beast and providing cooling air to the radiator.



The auto shutoff pressure gauge is really top notch! Much nicer than what comes on most lower end Chinese compressors. It has 2 set needles, I'm assuming one is a back-up in case thefirst doesn't work. I set it at 400 BAR. The second I set at my desired fill capacity. I will say I have found the gauge to be very accurate, much more so that most of the compressors I have owned.



This is the resivoir for the cooling system. The whole self-contained system hold about 1 liter of water/coolant.



Here's another angle of the radiator.



Here is the burst disk and grease pot, both these are accessible with the cover on the compressor.



The intake filts elbow was swing loose when I first opened it up, so I snugged it down so it wasn't loose. I'm not sure what the white part is attached to the head, but think it might be a temperature sensor.



Here is the main controller board.



When you remove the top of the grease pot, you can see the grease inside. The manual says to turn the knob on the top of the grease pot one full turn every 4-6 hours of operation. I need to contact GX and ask what type of greese to use, just to have some on hand if needed down the road.



The rest of the grease inside the grease pot.



This is how it looks with the cover on it, you can see the knob has arrows showing the direction to turn it when needed.

GX Claims this compressor has a 5 hour run cycle and is rated to fill up to a 6.8L air tank! Seeing that the temperature gauge barely moved when topping off the 580cc tank on the SK-19, I have no doubt that heat is not a huge problem with this compressor!

Amazon is selling these for $699.99 plus tax, but buying direct from GX Pumps, you can save over $100! They are currently on sale for $659.99, but by using the coupon code [GXPUMPS10OFF] it brings it to $593.99 shipped.

Thus far I am really quite impressed with the feature of this compressor for it's price point! It seems very solid and built to last. If interested, check out what they offer direct, they seem to alway have several different models in stock and on sale!


If you have any questions, please post them below and I'll try my best to answer them.

More than 1 year in the making.

Hope you enjoy!


Keep well and shoot straight!





HM

$1100 just gun. Comes with original box and 2 mags. I'll split shipping. Gun is amazing just don't get to shoot. I shoot my wolverine 2 R more

Hello just joined, but have been a lurker for a while.
I’m interested in getting a steyr air pistol, and I’m not sure about something.
It seems to me that the lp50 is sold in different velocity models. I wondered if the HP can be throttled back if one wants to stretch out the tank to get more shots?
Can the single shot evo10 be adjusted up to get a little more velocity to shoot 25 yards and beyond.
I don’t want a pistol for only 10 meter competition.
Any and all advice welcomed.
Thanks
Fred

Artemis P15 in .177 caliber. Has Jake Bowman biathlon cocking lever & cheek piece and AirFective shroud. In addition to the 1 factory magazine, factory single shot tray with tools & o-rings, I have 4 CARM magazines, and 1 CARM single shot tray. The factory shroud is included. Scope and rings are not included. Asking $385 shipped and insured. US mainland only, no AK, HI, or Territories. Payment by Paypal, no fees to me; not looking for any trades.

I may regret saying this later!
Package deal. Edgun Dedal Stalker won’t be able alone unless buyer only wants the R5M .
For sale Yellow Laminated stock, yes a yellow laminated stock Edgun R5M in .25 caliber with Edgun Dedal Stalker 6X. Stock have picatinny rails installed for bipod. I have only put less than 200 pellets through it. The gun has never been outside my home as it’s too nice looking to get any scratches on it. The R5M is in excellent condition and has spent most of its time in a gun safe. Shroud and moderator wrapped with high quality automotive carbon fiber vinyl wrap. The gun is tuned for 25gr JSB KINGS at 870 FPS. Includes Edgun fill probe, 4 aluminum magazines and factory box. bipod is not included. Not interested in trade. $2350 shipped and I will only ship to CONUS. Accept Paypal F&F as payment or add 4% to cover Paypal's fees. If you have any questions or like additional pictures please message me.

My winter mission (set by my wife nonetheless) has been to craft a device for the elimination of rats that emerge in substantial numbers from a creek behind our house and terrorize our chickens, which live in an enclosure 80 yards from the back of the house. In the spirit of full disclosure, I can and have dispatched them with my M3 shooting Javelin 22s but my wife balks at the noise, fearing the effect that it may have on the neighbors, one of whom bears a striking similarity (both in looks and manner) to Nancy Pelosi. Although air guns are legal to use in my yard, I’m also not keen to launch bullets at 50-60fpe from our raised porch. So, this led to the green light to craft a more subtle 177 slug shooter, which I figured would be in the ball park of 20-24fpe…

My first attempt involved the purchase of a 177 compact barrel for my Wildcat BT, along with several slugs from Nielsen, Daystate, JSB and Zan. I’m pretty good at tuning the FX platforms but couldn’t get the Wildcat to shoot better than a 2 inch group at 50y. A far cry from my M3 in 22, which is cloverleaf at that range. I then tried the barrel in the M3 (after adding a shorter shroud), but the result was the same. Borrowed a friends Marauder but it wasn’t any better. Dug out the old TalonP and picked up a 177 barrel. That was a little better but still not acceptable (humane) and besides, I can’t hack the hammer noise. Last chance (which I figured was least likely to work) was the Leshiy Classic. You know, the old adage that slugs don’t shoot well from short barrels (in this case 350mm).

Some details on this unlikely winner: Stock 177 350mm barrel with extender and STO moderator. DIY two stage trigger mod, fore grip, fixed 10x scope and Huma reg. Tuned at 96% velocity for each slug weight tested. I’ll cut to the chase and state that JSB knockouts, Daystate Howlers and NSA 12.5s didn’t make the cut. However, the Zan 13s showed a lot of promise, with the caveat that the LC gets notably jumpy in excess of 20fpe. I then managed to get hold of Zan 10 grain, courtesy of AGD and lo and behold, that was the magic bullet! 118 reg pressure and 17 CCW clicks on the hammer gave 930 fps (~19fpe) and a sedate and accurate shooting cycle. I’ve always balked at the term “mouse fart quiet” but this is as close as I’ve gotten. 71dB on my meter 1ft from the middle of the gun, compared to my slug shooting M3 with Tanto at 84dB. I’m not able to fill past 260bar right now, but that gives me about 20 shots before it drops off the reg.

Here’s a pics of groups at 50, 75 and 110 yards. I clicked to correct sighting after the 50 yard group and there was no more than 4mph wind. The 110 yard group involved a duct seal target stuck to a tree. This enables inspection of the slugs, which you can see in the second pic, all fly true to 110 yards and have full expansion. In that pic, one is removed to show the side profile, along with an Intact slug… Remarkably, the 110 yard group is only 1.75 inches. I’m no Ted Bier and I’d be pretty happy with that from my M3. FWIW, around 1mil drop from a 50y zero at 4800ft elevation.

Apologies for the length. Pretty excited. Hope it’s useful. Happy to answer questions.

I have a brand new still in the box never used or takin out of wrappin, Gauntlet short shroud and Tatsu moderator. Also will include aluminum air stripper for the .25 gauntlet 100$ for both.

Went to the Pacific Airgun Expo in Placerville, CA this weekend and came home with an unexpected surprise. It must have just been put out because I didn't see it my first time around the tables. I snagged a 100% as new condition Beeman HW97 time capsule in...........ready?...........20 cal! Even came with this hard case and a tin of pellets. Everything about it feels new.

This gun must have been stored flat because there is no flair to either the heel or toe of the rubber butt pad. For those "righties" like me who are not fond of ambi stocks, this has the right-hand dedicated cheek piece. And for those of us who do not care for the scalloped underside of the butt on new HW's, well here it is....NOT!

No tax, no shipping, no waiting. SCORE!

Life finally settled down and I went out to see John at New England Airgun to pick up some stuff I had ordered 2 months ago and purchase some other things

Those things were

A BD Taurus topped with a vortex strike eagle 4-24x50 ir shooting 185 gr at 950fps for 360 fpe for 10 shots.

A Huben .22 to compliment my .25 I topped this with a bug buster I had laying around for now.

An airacuda max .25 I topped with a helix

I picked up my huben 5kpsi hand pump, 20 tins of ammo and as I was leaving John asked me to shoot at the NEAC at the end of April and then proceeded to sign him and myself up, so guess I'm shooting.

Anyways, hope you are all well. I am glad the nightmare that was 8 weeks of no shooting is over !

Tomorrow I am going to zero at least the taurus in , probably the others as well.

Looking for users of this platform feedback. Looking at m3 as well. I've had mk2 impact but m3 is quick tune ability and short throw lever is appealing.

Less than two hours run time total on the Yong Heng w/ Mobil 827 Rarus oil only; has never gone above 50 C temperature; fills the 45 minute tank from 200 to 300 bar in about 25 min; everything works correctly, no leaks; total combined cost here is well over $550...get a reliable, independent air source here for a big discount...the water reservoir/tub not included...
1) Genuine Yong Heng compressor with less than two hours runtime and all its accessories including functioning water pump(215$)
2) Tuxing filter including all its accessories(89$)
3) Fan and Power Strip(30$)
4) 45 minute Scott air tank w/ fill valve and gauge(105$)
5) Four Uncles High Pressure Air Hand Pump w/ all it's accessories(59$)
6) the rack that everything is mounted to(34$)
7) Mobil 827 Rarus 12oz oil(this is the 12oz currently in the Yong Heng, not separate) high pressure oil designed for high pressure air compressors(19$)
$400 local pickup only near Harrisonville, PA 17228

I think i need to enter my shop on penn and teller.

Its amazing how a item just disappears in it.
( The latest of many times and things)
I had 3 seals a yellow, cream, and clear.

So like a few weeks ago i had all 3 a week ago i noticed i just had the 2 right in thete spot so where's the 3ed now . Looked high and low pulling boxes out with flashlight,even in places i know darn well not there but looked just in case i was fuzzy brained and maybe put it there for some crazy reason cause i did not wanted put up and in the spot with the rest..lol. sometimes i surprise myself.

Just ahead of this deal i just cleaned and reorganize up wall to wall so it's not like the shop was cluttered . If ot was normal cluttered up i could understand it getting misplaced.

Old age i guess .. lol. It'll pop up one of these years or another add to cart when really needed.

THIS THREAD IS BEING LOCKED

Got together with my pal Mike Bricker (Centercut) this morning after the weather kept ruining our previous plans. He's wanted to try his Panthera @ 200 yards & a new permission I picked up fit the bill. As always, it was great spending the time with him & getting a chance to shoot the new gun (.25, 600mm barrel) was AWESOME! Thanks Mike! I hope he'll chime in on this to list the specs on the Panthera (ammo type & weight, fps & other relevant facts). If you look at the picture of Mike laying prone, 200 yards ahead there's a microscopic white rectangle. In reality, that's my target board with Ten 8" targets on it. Kind of gives you a perspective of how FAR that actually is. The picture of the target shows MY first 5 shots trying the Panthera. The fact I could even get on paper at that distance blows me away, let alone that my first 2 shots were IN THE BULLSEYE!!! It's absolutely incredible how airguns have evolved in the last 2 or 3 years! Altogether, a stellar morning for me.
NOTE: Yes, I know the target is upside down. That's the way I mounted it on the stand (not intentionally) & not a fault of downloading picture incorrectly.

Got this on a Evanix AR6K. Groups better than my Donny FL or my 0db c-110 compact. Appears unservesable. No markings. Recognize it? Thanks, Bill and Addi.

This is my first experience with a springer: HW95 .177 tuned by Mycapt65 to a smooth ~14.5 FPE.

Since I can shoot 15 yards inside and I have sighted in dead on at this distance until the weather (in MI) improves allowing outside shooting. For sighting in I tried to use the artillery hold with hand between forearm and front rest. I was able to get consistent groups with this method.

I have been practicing offhand (silhouette hold) and noticed that shots are landing ~ 1' to 1.25" lower than when the gun is shot rested. I still have a way to ge to improve offhand capability, but the pattern of shots landing on average lower is clear.

The only explanations that come to mind are that when rested I am throwing groups consistently high or I am pulling shots consistently low offhand. It is surprising to me that both trends are so consistent. For sure it's not the gun!

I've had some fun conversations with @Hateful McNasty where he has explained that his guns will like CPHP, or else . I always test CPHP in a barrel if they fit the current power level, but I have never gotten very good groups at even 50 yards with them in whatever caliber. I totally get it, just wanting to shoot a can or tennis ball around the yard and keep it close, so it is cheap fun. I personally constantly push out farther and farther, and make the targets smaller and smaller, so I would end up shooting a golf ball at 100 yards (Like the Pyramyd Air Challenge, I guess). I have to know that when I "shank" a shot, that it was most likely me, and not the pellet or the gun.

So, this would lead me to believe that there are three camps of shooters (probably more, so let me know):

• Happy Plinkers:
  • Definition: Shooter that shoots small targets and insects around the yard and has a grand time doing it. Will often invite neighbors who have never even seen an airgun over to see how much fun they are.
• Driven Perfectionists:
  • Definition: Will sit for hours in whatever conditions necessary to test 1000's of pellets at different weights and velocities to find just the "right" combination for that set of equipment. This makes this shooter often isolated and not too much fun to be with most of the time, but can shoot an "impressive" shot on occasion. The driving force for this type of commitment may be a humane kill or a higher score or just a smaller hole farther away.
• Multi-Pumpers:
  • Definition: A person who likes to be immediately "in control" of every shot, and doesn't mind "looking like Popeye" to achieve this level of precision.

So, what am I missing? Are there any other "breeds" of shooters out there that require their own definition?

SkeeterHawk!!