Actually the question is two fold, is it a good idea to polish the Belleville washers in a AMP, or any other regulator, does it actually help? And two, what are the darn dimensions of them, I did something silly and reassembled mine before measuring them, anxious anticipation and itchy trigger finger. Oh sorry, it's a Maverick, details details.

Ah hah, got lucky, found part of the answer across the pond, 10mm od, 4mm id, .4mm thickness.

McMaster-Carr
Belleville Disc Spring
for 4 mm Shaft Diameter, 4.200 mm ID, 10 mm OD, 0.4 mm Thick

Part number 96445K197

Quantity 5 Packs of 12 each $3.63 Pack $18.15 + shipping

Why so many you may ask, well one...they are cheap and two, I've got 2 Mavericks for sizing and if I mess up the polishing, I'm good to go.

Gun works as it should comes with everything you see in pic. 2 mags huma regulator and a tin of its favorite pellets Come shipped in original box. scope not included.


$370shipped lower 48 paypal friends and family only

How many youtubers have done head to head reviews of these 2 guns? NONE!!!

You'd think this would be an absolute NO BRAINER as far as making content goes.

You have the M3, the best air gun in the world for quite a few years now, and then the Panthera comes out, a new "competition" rifle which supposedly has better valving and a more stable barrel.....soooo what am I missing?!? Why are we not seeing these 2 guns in head to head comparison videos??

I believe I have personally seen ONE comparison video by Rack n Load and it just a physical comparison.

So youtubers who CRAVE new content to put out either have NO interest in comparing the "2 best air rifles on the market" (which you have to admit is just ODD) or by doing so it would make one of the guns look bad and hurt FX's business (in which case it highlights the dishonesty of content creators)

I’ve got a HW110 .22 that I’ve tuned down.

It was originally “FAC” - about 29 ft/lbs with JSB 18.13g.

I dropped regulator pressure to 112 bar and replaced hammer spring shuttle with lighter UK spec shuttle.

I’m now getting well over 100 shots on a fill at 680-700 fps with 14.3g.

However, it seems to jump up about 20 fps when “falling” off the regulator.

I previously set regulator to 105 bar - and had same type of jump.

To get rifle to gradually drop velocity when falling off regulator, what adjustment(s) should I do?

-Ed

I want to get a springer, for target shooting at the range and plinking, maybe some small game hunting in the future, but primarily for fun shooting. I would like some options on wether to get .177 or .22 ?

Up for sale is my FX Dreamlite .25 no scope or rings. One 18rd mag. Asking $700 buyer pays shipping. Pm me for payment and shipping options only in the lower 48.

Hi,

Looking for an AAA Evol and/or Thomas.

All models of interest, but must be in good condition.

Shoot me a PM with what you have.

Erik

jeez,wind!

planned to go to a permission today to test a new gun,
check the weather aaaaaaand.......
rain,and 13-24mph wind with gusts to 34.

the wind has been crazy for the last month or so around here. (im in sw PA)

on a lighter note,
ive improved my shooting in the wind skills lol

Where can one buy a 1/8” BSPP male foster with male threads? Don’t want the ones with a check valve. I can only find the female threaded fittings.

I had a new spring installed in my Diana 54 by Motorhead. Good work! I had sent him just the action, and when I mounted it to my stock, the sled system doesn't seem to work like it should. Hefty recoil and large groups. Blah! Do I have the screws too tight? That is my guess. Any good info out in Air Gun World?

I previously removed, and am now reinstalling the FX Impact M3 picatinny scope rail. There is a little "wigle room" in the rail before tightening doen the three screws. Other than trying to get it aligned visually, are there any methods or tricks to make sure it is perfectly aligned with the barrel?

I have found myself reading through a number of pages on this forum, so decided it would be a good idea to join.
I am over on the Eastern side of the pond, based in Robin Hood's home town of Nottingham.
Currently got 25 airguns, mainly pistols with a mixture of 'traditional' airguns and replicas.
My most recent addition is a very nice Predom Lucznik spring pistol that I am planning on tweaking by knocking some of the rough edges off it and fitting a new spring and guides to tame the torquing from the firing cycle.

I love working on airguns as much as shooting them!

Sold

As new DonnyFL Tatsu Moderator. Has seen 50 rounds of .22 ammo.
For .177 and .22 caliber air guns
1/2" x 20 UNF threads
Dimensions: 1.6": x 4.25"

$100 and will ship fast. PP is fine or other as we discuss.
Thanks,

Are the specs outside of the barrel length and caliber of barrel and probe on a Taipan the same elsewhere? Mod baffles, length of pull, etc. thanks.

Looking to sell my Gen 1 .25 cal marauder. I've owned this rifle for almost 2 years. I purchased it from a member, steveoh. He had the gun tuned by JSAR for quiet backyard shooting, in turn makes this rifle pretty efficient. The last time I shot I got about 30 accurate shots before a major POI change.
The rifle has a Neal Clauge moderator which is super quiet, a CVlife bipod, Sportsmatch mounts, UTG ACCUSHOT 4-16X44. I will include the 3 magazines, 2 full tins of Air Arms 25.4g pellets (the 3rd tin is about half full) o-ring kit and Allen carrying case.
The only issue I've had is the tank leaks down during storage hence the reason the gauge is at 0psi. Holds a charge while shooting and gauge is accurate when filling the rifle. I haven't had time to mess with putting the o-ring kit in.
I typically shot the rifle at 50 yards and was always more than pleased. Today 3/28/23 I sighted in the UTG scope at 20 yards. it held a 1/2" group for 10 shots. I put 32 shots through it starting at 2800psi and finished at 1700psi as seen in the pictures. The 2000psi picture was after 24 shots (3 magazines).
I sold the Athlon scope so I'm now updating the post and this UTG scope comes with the rifle for $450 or $350 for the bare gun
Message me with any questions or offers. Thanks!

I'd like to sell my .22 Pulsar HP locally. Shipping is expensive and a PITA to boot. AOA has a .177 on sale now for $1200. I'm asking $900.00 for local pick-up and I'll include 6 unopened tins of JSB 25.39 Monsters with it for a local sale. Very accurate with the Monsters which is all that I've ever shot with it. Two non-double load magazines included which I altered so they do not damage the pellet probe. Total reseal done by AOA last year and the main valve was replaced. Bi-pod, scope and mounts are not included.

I think I have it narrowed down between the Athlon Talos BTR Gen 2 4-14x44 and the Element Helix 4-16x44. This will be going on my new AirMaks Caiman X .22 cal that I have coming. I have an Arken SH-4 Gen 2 4-16x50 that I could use but its a fat pig and think it will be too heavy for this small bull-pup. I will mainly be shooting 50 yards max, targets and pest. $450 is about all I want to spend on this scope for this set up. I'm pretty sure I have my mind made up between these two but am open to suggestions. Thanks for the help.

I have a daystate 110 volt compressor that has less the 20 hours on it but it seized and I am not going to fix it 500.00 plus shipping!
The pump is out of frame but still together.

I bought this gun new a year ago and like always did my tricks to it such as a 25cal stainless lothar barrel,shroud and moderator, I would like to keep wood but have all the stock parts. Comes with 30 cal barrel,probe and 1 mag,has both probes for 25 cal barrels. Would sell cheaper without my shroud and mod....only thing I don't have is FX/Donny fl mod. Has 4 orig alum side shot mags and 1 FX. Can be had with scope and rings for 600.00 more. Like new not scratched or dinged

3000.00

Will trade for a nice bipod or scope of equal value. I have a GX CS3-i in like new condition. I purchased it on the forum. I opened it up and all look fine. I’ve used it to fill my Prophet to 300 bar and it worked flawlessly and fast. I’d like to get $275 shipped.

I am the original purchaser of this gun. It is in excellent condition, just like brand new. The rifle is a FX Crown .177 with a black pepper laminate stock. It has a full length barrel shroud. In addition, it comes with a FX hard case, two FX cartridges, and one (digital printed) single loader. This gun is set up for Field Target. Extremely accurate. It could go to a FT match tomorrow. I am too old to continue FT and it has become a "safe queen". The scope (Hawke Sidewinder 10-50×60 ED ) is not included but can be considered if interested at a package price.

Will ship only to CONUS - split shipping cost. Payment through Zelle to: [email protected] - or PayPal (Friends & Family)

Selling for $1300.00 NO TRADES!
This is now "FireSale pricing!! (This was a $2250 gun)

I am watching them in streets coming from multiple directions. Still snow on the ground that gives me some time - a week or two - to prepare.
Started sighting in a LPVO (crossbow 1.5x5) scope on my Leshiy2, this will be a close combat action up in the air between my wallnut tree branches.
I know already I would need a scope tape for ranges about 4-10 meters. I have some leftover tins 18.2gn H&N Hunters from last year.
Lets get going







What is wrong with mounting a Xbow scope?

Brocock Commander XR Magnum .22 has a Magpul PRS Gen 3 stock, Hogue grip, Warne Bipod, and a Hawke SideWinder 30 6-24X56 SR Pro Gen 2 scope. I'm throwing in some ammo, and it still has the original parts. The rifle still works excellently. I want the money to buy a CZ457 precision varmint MTR. Looking for $1300.00 for all of it, US customers only, please.