Let’s see those low power setups for hunting rats and other small pests.

I have money to burn (not much lol) on a low power setup. Im leaning to the atomic/ranger platform, but before pulling the proverbial trigger, I’d like to see some more options!

Let the comments fly!!

Is there a best way/place to sell... MOD EDIT: removed a list of selling items.

Any advice is appreciated.

Just wondering if any body has attempted in utilizing a 700mm liner with the choked end cut off to 600mm and recrowned to shoot slugs. I have heard that slugs prefer non-choked barrels. I have been toying with the idea in my head to sacrifice a $100 liner and test it with a slightly larger diameter (.219?). Idk, just throwing ideas out there. I feel that the choke hinders the fps and requires a hotter tune for the required speed for slugs (in conjunction with more contact area between the slug and barrel, of course). I would love to know any of your thoughts on this. Does anyone think it’s viable to try? I know fx liners are not consistent diameter throughout the entire length. That’s why I suggested maybe a .219. Very curious about any opinions out there.

Hey everyone, sorry if you're tired of my threads here.

I'm going on 3 weeks with my .25 Maverick Compact and after troubleshooting regulator issues I finally have the gun "working" but I notice that when I tune it, the Pellets start to slow down again over 130 bar on the second reg.

I have the hammer spring set as heavy as it will go on power wheel #7. Any more hammer spring and the gun won't cock. I start with the reg at 100 bar and test every 5 bar as I raise to 150 bar.

25 grain pellets are maxing out around 915-920 fps
34 grain JSB MkII is maxing at 850 fps

Is this behavior normal?

Edit: Updated title, the problem was the pellet probe was blocking the transfer port and the wrong hammer weight was installed. Gun was janky as hell from factory.

Please read entire ad prior to expressing interest or asking questions.

$375 shipped to lower 48 Paypal F&F or you pay the fees. Not interested in trades at this time....reasonable offers considered.

This one has been just sitting collecting dust, time to let someone else enjoy it.

1720t converted to accept .177 Mrod magazines, with the bottoms clearanced, much like the old skool method of converting a Prod to .177, prior to CARM and others making Prod mags in .177. The mag slot is sized for Mrod mag thickness, not Prod....it will include a few 12 shot magazines from an Umarex Origin, which fit perfectly.

gun will ship with what is seen here:



It is regulated with a Huma reg and the longer plenum offered by huma, with a reg setting around 110 bar IIRC. The valve has a peek poppet with 2mm stem and a cobra chamber. Hammer is an all peek lightweight hammer. This yields a very crisp, muted shot cycle. Currently tuned for in the neighborhood of 35-40 shots of JSB 10.3gr at 750fps. It is very accurate at this tune and ammo, 5 shot groups at 50 yards are very easy to keep under 1.5-2", even as small as an inch if the shooter does their part. A slight increase in HST will put velocity in the 775fps range.

The Rapid 70 stock kit has been modified to accept AK47 style or AR15 style grips. The stock accepts an AK47 pistol grip nut, as pictured an adapter is used to accept AR15 grips. IIRC it has a Hogue rubber grip. A shotgun rubber recoil pad was used to improve the ergonomics as I found the Rapid 70 kit to be very challenging to shoot as-delivered. However these mods are fully reversible to OEM Rapid-70 form. The Rapid-70 pistol grip and buttplate will be shipped with the gun.

The shroud end cap was replaced with a 1/2-20 threaded adapter.

Note the magazine slot was cut using an end mill in a drill press with cross slide vise. It is not perfect, but it is not rough either. Raw aluminum was painted over with a sharpie to knock off the shiny. Magazines are fully retained and do not fall out when cocking.

Please note I am not a professional tuner nor is my valve/hammer a work of art. However they are fully functional. Valves are fairly inexpensive if you want to convert back to an OEM valve. I am including the OEM hammer/striker assembly. IMO, unless you are wanting to turn the 1720t into a powerhouse, I would recommend sticking with the gun in its current state, it works quite well as configured.

I have tried to be as transparent as possible with the details of this gun. I do not recommend this gun being purchased by anyone who is not experienced at assembling/disassembling their own guns and replacing o-rings, etc. The Rapid 70 bullpup kit requires a bit of skill to take apart and put back together.

Feel free to reach out with questions.

Here are some misc pics.













Single shot tray can be installed if wanting to shoot without magazines.







A target shot from a full fill. Each group represents a full magazine, except for the bottom right 3 shots after falling off reg... Shot from 50 yards.

Hard to find, silver edition Impact. Turn-key setup. Another amazing shooting and hard hitting rifle.
Brand new Covenant scope, 5-25x56 FFP + mounts (Original box and paper work can be provided if desired but will be shipped (and charged) separately)
4 pellet speed loaders
Holds air forever
600 mm barrel
Custom carbon fiber dipped shroud
Sabre Tactical extended Pic rail
DonnyFL KOI moderator
Will come shipped in an FX hard case

Comes with everything shown.

SORRY.... NO TRADES.
Asking $1450 Shipped CONUS.
PP F&F, or you cover the fees.
PM with questions.
Thanks for looking!

-Jimmy

Absolute slamming turn-key setup. Probably the hardest hitting MK1, MK2 or MK3 air rifle I've ever shot or owned!
Comes with an 8-32x44 SFP tactical scope + mounts
Holds air forever
700 mm barrel
Extended Pic rail
2 unopened tins of .30 JSBs
2 Mags
Custom cheek piece
Barrel band
Hydro dipped carbon fiber moderator
Will come shipped in an FX hard case

Comes with everything shown.

SORRY.... NO TRADES.
Asking $1550 Shipped CONUS.
OR
$1450 no scope or rings
PP F&F, or you cover the fees.
PM with questions.
Thanks for looking!

-Jimmy

Could this be the new mk4. Lol.

Brocock .22 Bantam Sniper
Holds air forever
Comes with 7 high-capacity magazines!
Tanto moderator
Come with bipod and bipod-extended

Amazingly accurate and quite rifle.

Comes with everything except the scope & rings.

SORRY.... NO TRADES.
Now asking $900
PP F&F, or you cover the fees.
PM with questions.
Thanks for looking!

-Jimmy

Silver edition Impact. Turn-key setup. Properly tuned by one of the best AG tuners in the West and is an incredible shooting rifle.
New Argos Gen 2 scope, 8-34x56 FFP + mount
4 pellet speed loaders
Holds air forever
Sabre Tactical extended Pic rail
Sabre Tactical adjustable cheek piece
Sabre Tactical Ambi-Cocking level
700 mm barrel
Great trigger
2 full tins of Monster Diablos
Will come shipped in an FX hard case

Comes with everything shown.

SORRY.... NO TRADES.
Asking $1700 Shipped CONUS for everything.
PP F&F, or you cover the fees.
PM with questions.
Thanks for looking!

-Jimmy

Looking to sell my Leshiy classic. Currently set up as .30 cal 350 barrel. The gun works flawlessly. It has a Warren Snaith custom grip, trigger mod, Huma-Air reg, case and .25 cal pellet holder. Also comes with .25 cal 350 barrel. Finally the gun will come with 400 .30 cal poymags. This .30 cal combo is incredibly accurate. I just recently put the .30 cal barrel in it and it is deadly accurate under 40 yards. Not to mention quite. Selling because it does not see much use. My pigeon problem is no longer an issue and the gun sits unused too much for such a quality gun. I will not part out. Scope and rings not included. $1,450 ppff tyd.

Hi Guys,

I have 2 Baikal SSP airguns for sale.

First is my IZH46 this is not the M and really does not need to be.
I have done a couple thing to the grip to work for me.
The grip has been stained for appearance and I have cut finger grooves into it with stippling.
It now fits the hand like a glove no more 2x4 feel to the grip.
Seals are in great shape, first shot last shot they are all consistent with no pump up over time.
Additionally I have a B line scope mount that will come with the pistol.
I used it for a simple TRS25 red dot that is not included.

Funny story this little pistol has earned the name Wasp slayer as I have used it to kill wasps from approx. 15+ yards on a regular basis.
It is accurate and is not finicky on pellets. Its favorite is 7.0 Meisterkugeln.

I am firm at $550 + actual shipping for the pistol, I do not need to sell it and love the gun.





NEXT!
This one is for the 10 meter rifle fan or a collector of RARE Airguns.
This is my MP532.
If you never heard of it you are not alone.
I was such a fan of my Izzie that I did a search one day of converting an Izzie to a rifle.
Much to my surprise Baikal already had.
The result the MP532, designed to be a competition 10 meter .177 SSP rifle.
It fills the bill easily on accuracy.
What this gun lacks in refinement it makes up for in performance.
I shot it over the chronograph tonight and straight off it shot a 481 fps with 7.0 meisters (also the favorite of this gun)
It followed it up with 479, 481, 483, 483, 478, 485, and 479 again. * shots extreme spread of 7 fps. At that point my battery
in the chrono went dead for the night.
But given that this is a single stroke pneumatic it could do this all day and night without fail.
I have added a Gheeman 530 1.5x diopter/iris. This is a huge improvement over the stock iris which was missing when I got the rifle.
This with a modification by the previous owner are the only 2 modifications to this rifle.
The previous owner sanded the rear comb to form a pocket in the cheek rest for perfect head placement time after time.
While I would have preferred it be completely stock, it works very well in getting that proper head placement.
It was a little rough sanded so I have since sanded it down smooth and added some coats of gun oil over it to blend it in with the rest of the stock.
I have not refinished or stippled the stock on this gun, I feel it is too rare to modify beyond what has already been done.
While the beauty (or not) of Russian laminate stocks are in the eye of the beholder, it is fantastically functional in placing the shot over and over again on target.

I am looking for $750 + actual shipping, which a approx 500 less than you would pay for an FWB601.
While there is no denying the refinement of the FWB, this should shoot right there with it and is significantly more RARE.

IF SOMEONE WANT THE PAIR I WILL DO $1100 Plus actual shipping.

BNIB Dreamline Classic, Walnut Stock, 177cal. Longer 600mm barrel, 1-22 round magazine, fill probe. $899 plus shipping. Willing to trade towards any Theobens, cash adjustment for any difference in value.

Price dropped to $250!!

DAR Gen 2 .25 cal.

Great little hunting rifle. No leaks, holds air perfectly, and is quite accurate with several pellets.

There is nothing wrong with it. I just don't have time to hunt with it anymore, and my .177 and .22 are much cheaper to punch paper and plink with...

Tuned to shoot 25.4 grain pellets @ 875 fps, for 43ish ftlbs. This tune allows 20 shots (2 mags) before falling off the regulator.

It comes with 2 magazines, a 3d printed single shot tray, fill probe and all the pellets in the pics.

Asking $250 shipped to the continental US. I accept PayPal friends and family, Venmo, money order, or personal check(I will ship once the check clears).

I am not interested in trades at this time other than a Notos or possibly a Origin, JTS or Avenger in .22 or .177.

I also have some scopes available to sweeten the deal if that helps. They are not great, but would get you shooting.

Ask about them with a pm, and any other questions or if you want specific pics.

Thanks for looking.

Are there any upgrades that anyone could recommend for the Air Venturi Avenger .25?

$1300 Shipped in CONUS. I accept Paypal, Zelle or USPS MO (rifle will ship once checks clear)

FX Crown MKII in .25 cal with a 600mm barrel. Shoots great, 35 yard groups at 1/2" or less. No leaks or any other issues, it just works! Ordering a new gun and need to sell a few from the herd.
Includes:
FX Frown MKII .25 cal
1 original magazine
2 Orion magazines
Extended female fill adaptor
FX hard case

Thanks for looking!

Well I’m need of a new air compressor my shoebox air compressor finally died been sweet talking her for last couple months but she is done. Anyways need something new and holds up well was wondering what you guys have tried and what works well. Has spare parts available and some sort of customer support that actually exists. Thanks in advance!

$1300 shipped in CONUS. Taipan Veteran 2 in .25 cal. Scope and bipod are not included but can be negotiated if interested.

Gun shoots just like everyone talks about. Absolutely nothing wrong with it, holds air all day long. Shoots pellet on pellet.

Includes:
Taipan Veteran 2 in .25
Talon Tunes soft case
Original manual
2 magazines
All original accessories

I accept Paypal, Zelle or USPS MO (rifle ships once checks clear)

Thanks for looking!

WTT or WTS

I have a 5.5mm Taipan Veteran in overall very good condition and lazer accurate, with 2 x magazine,s, 3d printed mag holder, digital gauge and 3d printed cheek piece and donny fl silincer adaptor to 1/2 unf

Scope and Bipod not Incl

Would like to trade for one of the following rifles in .177

Taipan Veteran Standart
FX Dreamtac Compack.
Brocock Commander XR

If Trade for Taipan in .177 i wil keep the 3d printed cheek piece and mag holder

Selling for $950 if intrested
Shipped from Zip code 72320 buyer pays shipping

Hello There,

Today I did somente shots with my Crosman 1377, It was modified to a carabine, with Crosman Shoulder Stock, Clevercraft Mount Picatiny bought on Ebay, Barrel Band with Silencer Adapter also bought on Ebay and one Last modification was The trigger spring adjuster.

Shoot Info:
5 shots per Target
Distance: 16 meters
Pellet: Rifle Dome 4.5
Number of Pumps: 5x
Position: Bench rest
Scope: 3-9x32ao

I’d been contemplating picking one of these up for a while. I didn’t know if I wanted a .457 Bulldog or an M357. I decided to go with the M357 because it’s cheaper to shoot considering ammo costs, I have more experience with various iterations of the.357 Benjamin Bulldog and I’m pretty familiar with the platform to where I’m comfortable enough to work on my own gun to a certain degree. I paired mine with an Athlon Helos 2-12x42mm FFP as seen below. I may try another scope or two on it in time


I sighted in the Helos at 25 yards shooting NSA 110 grain slugs. Per my other Bulldogs, this one shoots them pretty well up close. I only made it out to 35 yards before the heat started cooking my electronics and giving me a headache. I packed it in around 103F. Here’s a couple of shot strings.




My initial impression of this rifle is that out of the box, this is an adequate deer gun for me considering my experience with the platform and the regulations for deer hunting in the state of Texas as of 2023. The M357 is also capable of taking raccoon to coyote sized varmints. Due to the increased velocities compared to the stock .357 Bulldog, I’m thinking this gun is capable of ethically taking out varmints from longer distances with light 110 grain slugs. I’ll know more when I stretch my range farther.

My verdict on taking out deer at a distance is also inconclusive. I don’t want to speculate there so I’ll wait until I have more data. To satisfy the 215 ft/Lb minimum requirement for taking white tail deer, these 110 grain NSA slugs need to be shot at an approximate minimum velocity of 939 fps from this Benjamin Bulldog M357. My suggestion is to chronograph your rifle once you get it to be sure that it’s consistently shooting at or above this velocity with 110 grain NSA slugs or other projectiles of the same weight.

As you can see from my shot strings, the first two shots from a 2900-2800 psi fill meet the legal minimum requirement. After five shots (one magazine) the reservoir finishes around 2100-2000 psi. I haven’t pushed any shots below 2000 psi. That’s good enough for me for an unregulated hunting PCP. Oh yea, This rifle is LOUD and powerful. This isn’t a toy. You’ll likely want to wear hearing protection if you wish to preserve your hearing. It is not a backyard friendly rifle out of the box. I have not shot it with a moderator yet.

Hey Guys and Gals,
Had a interesting incident occur while trying to ship my gun for a warranty issue.
This is going to be a very generic post, no airgun names, no manufacturer names. Don't ask.
I have an airgun that is still under warranty. Something very strange occurred while I was working on my gun. I was stumped so I contacted the service center and talked to a technician. After a very lengthy discussion, he concurred that I had followed proper procedures during my work and suggested I send it back so they could take a look at the gun, something small is wrong.
Packed it up, went to FedEx, fright company this manufacturer uses. Three quotes to ship starting a close to $350.00, down to $150.00. Puzzled that my freight wasn't paid for warranty work , once again call customer service, while at FedEx, and was told that the company had changed policy on freight cost for warranty work. Change the policy on a sales contract we had entered into at the time I bought my gun. To me that seemed illegal, but not being lawyer, I couldn't be sure.
Anyway, thanks to the wonderful customer service representative, we got it sorted out, and my gun is in route . My return freight will be charge to me but at the manufacturer's rate, not general rates.
Bottom line, before you ship your gun back for warranty work, make sure of your freight rates just to be sure policies haven't change.
All is good.
Thanks
Mike

Complete Leshiy 2 package includes
6" Valkyrie handguard
1 x .177 barrel 250mm
1 x .22 barrel 250mm
1 x .25 barrel 250mm
1 x .30 barrel 250mm
1 x .177 mag
1 x .22 mag
1 x .25 mag
1 x .30 mag
1 x .177 speedloader
1 x .22 speedloader
1 x .25 speedloader
Huma .22 Mod40 3 Stack Moderator
Huma .30 Mod40 5 Stack Moderator
REPR Regulator adjustment tool
Leshiy 2 Workmat
2 extra mag plates
2 x factory mag holders
I have the original box and the gun will ship in that.

This is an awesome package for anyone who's considering getting a Leshiy 2. It works perfectly and is in great condition. It's pretty much been a case queen and has been in 22 for all of its life. I've decided I want 2 or 3 dedicated caliber guns instead of swapping out barrels and I just can't afford to do that and keep this. I'm sure I'll regret selling it but it seems like the thing to do right now. Any questions just pm me.

Also pictured that I will include is the Leshiy 2 sign and stickers I made. Pictured but not included are the case, range finder, scope, flashlight, stand mount, and fx radar.

$3375.00 shipped. PayPal F&F or you pay fee, Venmo, or money order (must be received before shipping the gun). Not looking to trade as I've already bought my other guns.

Hello,
I have convinced a friend to start FT and he's wanting to do pistol and rifle with one gun. He mentioned the atomic in 177 which I know you guys that have them love them but he is running to shoot hunter class in both. I know it will do great for pistol but can or does it get closer to that 20fpe for rifle? I know in 22 it can but not for sure about 177. AoA says 15fpe. He said no Thomas.

Thanks
Jon

This is a Brand New custom rifle built by Utah Air guns. Fx M3 .35 with Tensioned slug barrel here’s the list of what it comes with

FX M3 .35 800mm
FX 800mm tension barrel kit
FX slug liner
Saber tactical TRS rail
Saber tactical adjustable butt stock
Saber tactical adjustable cheek riser
Saber tactical lower rail
700cc carbon 300 bar bottle
American tactical 1 piece mount with titanium
Black hound Evolve 5x25 56mm MOA
Donny FL Emperor
5 factory mags

This gun is Hydro dipped in Obskura skyfall and ceracoated in FDE this is over a $5k package willing to sell for $4k shipped anywhere in the USA

I will also include 7 cans of ammo