Selling an RTI Prophet Performance with the Walther Long Range barrel. Bought used from Airguns Of Arizona in April. I like the Gun just not using it. Comes with one 11 round original magazine and one 16 round, bought from Orion the Iguana Hunter. One Amazon bipod, a suppressor from Buckrail and a cheaper Monstrum scope.
Asking $1000 shipped.

Pretty much I would not need it for anything else.
Only to see if my pellets/slugs flying error free from the tune = no corkscrewing. So pretty much "one time use".
So far I could not justify spending $500+ for the rig, but also I stoped my club membership and have no longer access to multiple distance ranges to check the tune on every 5 meters if hits the same X.
Anything inexpensive cam on horison that can do slow mo in quality?

Couple going in the mail tomorrow. I need to take better pictures.

182 mm x 40 mm at 5 and 1/4 oz 30 caliber: 5 Tesla Baffles and one diffuser/stripper. FDM printed endcaps, resin printed baffles. EZtap steel insert.

103 mm x 30 mm at 2.15 Oz 17 caliber: 4 Tesla Baffles and one diffuser/stripper. Resin printed endcaps, FDM printed stripper/diffuser, Helicoil insert to accomodate a very short thread on the gentleman's rifle.

The Mav is resting @ FX waiting on the boat from Sweden. I jest, of course. Talked to tech today. Promising to get on it as soon as part of arrive. Cocking rod guide broken along with hammer spring. Only 2nd one he's seen break.
So I got a real gun. Kelly @ Krazy Kool set me up with a 25 limited. Whata gun!
Light enough to walk & stalk.
286 yds @ a 3" spinner. Been watching them forever but wanted the glitches out of them. This is a slug gun.254 diameter.
Of course a lot more dependable @ 100. All day bangers.

I peruse the Classifides virtually every day. It amazes me that very few springers and CO2 ever cross the auction block any more. Are they highly sought after and therefore not for sale or are people losing interest in them?
Thoughts?

Johnny Bravo

listing my maverick that is just sitting. its currently set up in 177 but i have the barrel kit for .25 caliber. you can pick either caliber or both. it comes with 1 magazine in each caliber. im asking $1200 shipped + $ if you want the 0DB moderator. if you want the other barrel kit we can work out a package deal. im also willing to trade for something modern of similar value like a daystate, BRK , wildcat BT or even a krait. im open to offers also.

Is there an email address for John Thomas(the tuner)?

Helping a buddy get into the pcp hobby that’s left handed. I understand fx has the M3 test can be set for left handed cocking but now the aftermarket gets involved to move the mag to the left side, which I want to avoid especially for a starter gun.

What are the guns out there are benchrest worthy, that come either with fixed left hand cocking or can be made to be left hand friendly, with no issues of the mags getting in the way? I’d like to put together a list to present to my friend so he can look at his budget to see what works. After I had told him about my RMAC trip he showed enthusiasm in attending that event for next year.

Thanks, all

Groups? I'm really curious what you guys get at 60-75 yds plus....please let me see the target and gun used . This weekend I'm going to try 75 yds with my tx and hw97 for some fun.

Just before the months end!


…and you can too

I I live about 60 mile south of Chicago and the smoke and haze is so thick I can't even go outside!! Never seen anything like it!!!Hopefully the wind will shift and clear out some of it..

LIKE NEW DAYSTATE COLTRI COMPRESSOR 110 30 AMP 10 HOURS ON IT FROM NEW. HAVE ALL PAPERWORK ORIGANAL BOX. EXTRA OIL AS THIS ONLY HAS HAD THE RIGHT OIL IN IT, CHANGED OIL EVERY 3 Hours JUST TO KEEP IT CLEAN, WAS 2600 1700 OBO SHIPPED NO TRADES POST PICTURES LATER

Can anyone tell me what barrel krait uses? CZ berrel ? square or circular rifling ? Who owns the krait please give me some pictures of the barrel's rifling. 1 or 2 ?

Up for grabs is original Prophet Performance 1 .22 with the long range barrel. It shoots the .22 JSB monster redesigns light out at 970s. This thing has been just begging to be shot, but just been busy with other projects. It has been the most reliable gun that I have owned yet and incredibly robust. The gun comes with an externally adjustable flex regulator. The reg is not pretty but all the gauges work great. The deal from the guy that didn’t know what he was doing was just too good to pass up on the reg. This thing is a hunter and darn good at it. Shooting prairie dogs from 10 yards to 175 yards with pellets!

The camo vinyl stickers can easily be taken off without damaging the gun or bottle.

The gun will come with 1 original mag, 2 orion mags, jb3d butt hook with mono pod, short ODb moderator(not in picture) and barrel band. SCOPE NOT INCLUDED.

I’m asking $ 1500 $900 obo you pay shipping.

First picture group is at 100 yards with two little flyers.
2nd picture is top group 75 yard and bottom group 50 yards.

What does x represent, what am I solving for? Should be fairly simple.

x = ChamberVolume*(ChamberPressure/(PlenumPressure-PlenumPressure*PlenumPressureDropPercent/100))


x = ChamberVolume*(ChamberPressure/(PlenumPressure-PlenumPressure*PlenumPressureDrop))

Bonus points if you can tell me where this equation may apply in an airgun.

-Matt

Up for sale is a LNIB Fx Maverick Sniper .22, this gun was only fired at Trenier Airguns to test functionality and check speed. A friend of mine purchased it from Trenier Airguns around October of last year and has never took it out of the case. The gun is still holding air from leak test before it was shipped out so there are definitely no leaks. I've looked this gun over and it is seriously like new. Asking price is $1250 shipped and includes everything in pics. PayPal FF or please pay fees if interested please PM me.

Recently I became aware of the block or ignore button. I have read a few posts about the issues that come with that. My question is this...
I blocked a member who (To me) was annoying and commented his/her opinion on EVERYTHING throughout a thread. In my privacy not through a beef I blocked him/her but since him/her comments on EVERYTHING many threads (i guess) don't appear.

Admin question: how do I UN ignore/ block this member so I can see threads? I can scroll past just seemed convenient..

new format at AGN , have to retrain PC mouse to hit forums , not featured items .

Up for sale is this nice HW100 Carbine. Beautiful walnut stock and the factory moderator makes it very quiet.Includes magazine and fill probe. Scope and mount not included. Only selling because I do not have time to shoot it. $875.00 OBRO shipped to the lower 48 UPS adult signature Insured.
Paypal friends and family or postal money order for payment.

I moved from So Cal to Prescott AZ and thought the days of finding deals on craigslist were over. About 20 times less people. Then this pops up for $1000! I really didn't need it but who can say no to a deal right?

IMy wife and I was setting in the kitchen when a diet soda exploded in the cabinet, it was very loud, The can was bent all out of shape like I shoot it with a hollow point .
Now I have had a Carbon Fiber 4500 psi tank fail on me and the Carbon bands just let go with tiny little leaks.
Leads me to think the metal tanks when they fail the metal fails, On the Carbon fiber tanks the carbon bands fail and just let go very slow,
Mike

For sale as a lot:

1 FX 44 open tin, 103 count
1 FX 50 open tin, 130 count
1 JBB 50 open tin, 145 count
1 JSB 44 open tin, 106 count
1 FX 44 Atomic / Hades open tin, 143 count

Unopened sealed tins:
1 FX 44
1 FX 50
1 JSB 50
4 JSB 44

12 Tins in total, $175 shipped, PayPal preferred. I have lots of positive feedback so bid with confidence. Priced fair, no trades or low ball offers please.

i just traded for this rifle nothing wrong with it hold air fine i just not to big fan of 177 no scope

Anyone have an idea to what the thread size is on the HW44 moderator tube ends/end cap/barrel adapter? Looks like possibly a 1”-24 or 1”-27. Taps are expensive. Thanks!!

Up for grabs are 2 new scopes, not even taken out of original packaging. Just did not get around to needing them.

UTG is SOLD


Centerpoint 4-16×40 SFP 1 inch tube.
Still in blisterpack.
55 Shipped and insured.

PP f&f, or other payments can be discussed.

Check my member feedback; it's all good.