Howdy all

I did some searching but didn't find what I was looking for. My Brand new HW97K just arrived along with a BKL High 4" long single piece mount (6 rail screws) and a Hawke scope. The HW didn't come with a scope stop pin, and neither did the BKL mount - in looking at the BKL website, the FAQ question as to whether they use scope stop pins was blank. I"m assuming with the six rail screws, the assumption is one isn't needed?

Also - wanted to verify - BKL recommend 15-17 inch/lbs for the scope rings and 35 inch/lbs for the rail. Assuming this is a good place to start after using alcohol on the rail and scope mounts?

thanks!

Hi Friends,

Up for sale:

Make: FX
MODEL: IMPACT
VERSION: M3 SNIPER
CALIBER: .30
PRICE: $1950
NOT TRADES AT THIS TIME
CONTACT: [email protected]
NOTES:

NEW in the box with all standard included accessories. Price includes shipping anywhere in the lower 48 USA states.
Gun has been fired to confirm factory velocity settings. If you have any questions please use the contact information provided.
Email me with your phone number if you have any questions.
Buy from a trusted source!

Very low 2.8 hours on compressor. Comes with intake moisture filter and spare parts and burst discs. Compressor is in like new condition. Comes with everything it came with new and a 2nd moisture filter. Asking $975 shipped (let me know where you live) if to far will need to discuss ship cost or I can deliver if close. Located in Port St. Lucie Florida. Any questions just PM. Need gone!!!

A custom build from TalonTunes

• Save hundreds on this package
• This is for pest control in dense suburban population
• It is beyond “Backyard Friendly” registering below 60 db in open space
• Its that quiet
• Equipped with a DonnyFL Fatboy in .22 caliber for 23 FPE
• Comes complete with
• Element Helix 6-24×50 SFP, Quick Release Mounts and Carbon Fiber Bipod.
• Mounted and sighted in at 30 yards..
• Weight 8 lbs with scope and bipod
• OAL 34 inches
• Package comes with rifle, scope bipod, two magazines, DonnyFL Fatboy, high quality soft tactical case, and fill probe..

To those that knew her, esp as having met her at the yearly Field Target events held in the past here at our ranch in Temecula, I will be holding a Memorial for her on November 4, 2023 here at our property.

I can be contacted by email at: [email protected]
or text at (951) 375-6962

Sincerely,

Larry Durham

I have powerful

Fwb 300s mini. No fill pressure and mags to content with today. Spinners @ 35, 45, and 55 yds. The old guys got it right the first time.

What is your favorite scope thats under 20oz? What are the specs?

I like the vortex 3-15 lht I'm currently using but it has its drawbacks. I'm curious what else people are using.

Hello folks,

Im just somehow getting bored with the general "subMOA" accuracy rule.
Started to brainstorm about the "sub0.5MOA" accuracy class. Lets clarify, it doesnt mean some one group per year on a lucky day but consistent, moreless "all the time" sub 0.5 MOA grouping. I set my goal to 100m with no wind for this.
For the first is there some so hell accurate air rifle on the market? Mostly talking about FAC rifles but not super high energy, maybe up to 40-60J (to make it easier to hold for the 0.5 MOA accuracy) but sub12 could be also.
Im sceptic that its so easy just to order a rifle and thats all. Im ready to experiment, modify, do custom rifle parts, etc. Basically any tuning.
But if you would be an engineer, and you have been told "hey make me a sub 0.5MOA air rifle" what would be your starting point. What rifle you would get to start from as a baseline? (no, please just dont write FX impact)
I have a Prophet 2 in .25 and its capable for 0.7 MOA groups pretty easily, without any custom special modifications. Maybe it would be a great rifle to start with with a .22 barrel. I believe the .22 is similarly accurate as the .25.
What would you start with and what is your opinion in general? Please not that this topic is meant to be "scientific" and sophisticated. So try to aim your comments this way.
Thank you.

Always kinda exciting to go through the steps for a new rig. I installed a ScopeWerks wheel last night, now comes marking up the wheel and shooting for dope.

Daystate Red Wolf HP in .22 with Midnight Blue stock, excellent condition.
Capable of some very good groups, as seen below.
Original box & paperwork, one magazine & single shot tray, choice of 0db 110C or DonnyFL Tanto moderator, factory battery & charger (scope/rings not included). Also includes an extra 2000 mAH battery & programmable battery charger:
https://www.amazon.com/dp/B09TSXBDZH?psc=1&ref=ppx_yo2ov_dt_b_product_details
https://www.amazon.com/dp/B07YD3JNTZ?psc=1&ref=ppx_yo2ov_dt_b_product_details

$1800 shipped CONUS- Zelle, PP F&F, USPS money order.

Would consider trade for Kalibrgun Cricket 2 Tac in .22 or .25.

PM if interested & I'll get you my number to discuss & answer any questions.

Did JSB used to have a patent on pellets? I mean they always had distinct pellets but now like H&N came out with 18gr and 15.9gr just like the JSBs and JTS is making comparable ones now too. I didn't know if something ended the last couple years that now they can make "copies" essentially. I welcome it as ive personally seen a decline in consistency with JSB over the last few years in the 18gr which turned me off them completely and now only go for 15.9gr versions. And many people have had issues with the MK1 and MK2 Heavy .25s and of course the .22 MRDs.

Hello everyone,

This morning I shot a Squirrel with my .177 cal Diana Bandit with a Red Dot scope.

So you say, big deal folks do that all the time.

Well this shot was at 25-yards . Now I must admit that I have shot at this guy about a dozen times already and missed . This make me think what is Luck or Skill ? If you are aiming to place that tiny little Green Dot on a target at 10-meters then you would expect to hit or at least get close with a hit. But at 25-yards ?????

What do you fellows think.

ThomasT

Hello everyone,

I'm a bit new to airguns having only shot pump ones when I was a kid, and then getting a gamo whisper cat break barrel that isnt as silent as reported.

Now I've been looking at PcP airguns and pouring over videos and reviews trying to do my due diligence and research. Many are contradictory or just seem like advertisements.

Ill mostly be doing plinking, but wanting something to do small game like squirrels rabbits or cats. I want something reliable. I dont mind spending more for something better quality if theres a legit reason for it. I'm also looking at something quiet which is the draw to airguns with moderators. I'm wanting something quality, accurate, reliable, can shoot slugs or pellets, quiet and doesnt require alot of fiddling once dialed in. I'm looking at brk, the avenge x, fx but open to others. I dont care about brand names as long as its reliable accurate and good customer service.

Whats normal price for used air guns? Ive seen a few in various places but they seem priced high. I have a lead on a laminate FX crown mk1 in 25 but not sure what a fair price would be.

I'm going to a shoot near columbus ohio sunday and hoping to get some info there and look at various setups.

Any feedback is welcomed.

I have sidewinder. 22 for sale. Tuxing air compressor. 4 clips. Behemoth suppressor. Reg boy regulator. Everything needed for use. Over 4000 invested. Will sale all for 2000 firm. This is deal. Get back to me thru this forum. We can talk by phone if your interested. Pictures any questions will be answered.805-204-7199 bob

The coyotes around me have been going nuts over the last week and I’m getting the itch to get after them but I simply don’t have the time. They’ve been waking me up howling and barking between midnight and 3 am. So this evening I heard one open up around 7:30pm and I couldn’t take it any more. I fetched one of my cheap diaphragm callers and started talking to them. I located one and got it to talk back. We chatted a couple of times over the course of 15-25 minutes. I then went in, grabbed a .357 Bulldog, put a little more air in it, loaded two slugs in a mag, grabbed my Trigger Sticks, and went outside hoping one would do something dumb. Shot in the dark, I know, BUT either it’s mating season or there are some young and dumb coyotes around here. Either way, I’m getting anxious waiting for an opportunity to take time off to hunt. If I can get a good 3-4 weeks in that will be lovely.

What have the coyotes been doing in your area as of late? What type of behavior(s) have you encountered? Have you been successful in hunting any lately? Are you day or night hunting them? Which gun and ammo combo are you using? What sort of nighttime setup(s) are you running: thermal, night vision, or torch/spotlights?

---

Im new to air rifles and just inherited a few rifles and bunch of other stuff. I'm going to keep a couple guns for myself and get rid of some the others. Here is a small list of what I got.

Benjamin Marauder .177

Benjamin Cayden .22

Ataman M2R Sport .177

Daystate Huntsman Regal

Air Arms S500XS .177 with GRS stock

Also got a couple air pistols, handful of scopes and a compressor that I have no clue how to use. Im located in Corona. If anyone is close by that can come show me how things work that would be great. Thanks.

Edgun Leshiy 2 300cc tank/ Ronin 350mm Kit

I have a complete kit. 300cc tank, 350mm picatinny rail, barrel cover, hardware and Ronin for .22

Asking $275 shipped within the US.

hello everyone, this is my first post on here and what would be better to talk about than my first PCP airgun! I just ordered an Akela in .177 from airgun depot (220 bucks off with a free Benjamin hand pump) I have been trying to do some research online while im waiting for it to arrive but I am having some difficulty finding good information. does anyone have any chronograph numbers for the .177? I have seen some people saying they're sending 10.34s at around 1000 fps, is that the norm? also, other than shortening the hammer spring is there any mods anyone would recommend? once I get the gun in the mail and spend some time getting to know the gun I will be posting a ton of content on my YouTube channel as well to help spread any information shared here. thanks guys!

...about “Being Drawn to The Shot”. Has this happened to you?

I’m talking about a previous shot on a target. Today, while practicing out to 50 using an 8.5 x 11 copy of an N50 card, I tried to put at least three shots in each of the 12 targets. I’d start at number one, end in number 12, then go back to 1, and each time rechecking wind and using the sighters available.

What I’ve noticed for a long time, even back to the shoot n see target days, it seems follow up shots get drawn to previous shots on the target. Didn’t matter to me back then as my rest wasn’t the best. But with my equipment upgraded and I try to cover all my bases during set up, I really took notice today. While aiming at that tiny center dot within a 3/8” circle, it didn’t matter if I adjusted elevation or held for windage, 90% of the time a second and even a third shot would land on where the first shot was placed. So some of the targets have all three within the X, some 3/4” away and low at 7:00 all stacked on top of each other, some 1/2” high at 1:00, again, all three on top of each other.

My questions: if wind was a steady factor of say 3-5 mph, does the angle of the shot from bench to target have a big play in this?(I’m on a slight 10 degree slope downwards from bench to target, btw). Three clicks left to right at 50 yards will show a change, right? In my case it doesn’t matter, the second shot lands on the first.

Or is it cheek weld sight picture thru scope? I make dang sure I have no black rims and my picture is wide open clear edge to edge.

Is it cant? My set up is a front tripod attached to arca rail and a ST rear monopod. I prelock my cant level with the ball head and unless I make a large swing left to right on the tripod, I never have to readjust the level.

Lastly, and I’m just throwing this out there- does it have anything to do with parallax adjustment not in “Sync” with a perfect ocular adjustment that’s typically done first when setting up a scope for the first time?

So before advising on this, just remember, my hold offs or windage/elevation adjustments are going to be as if I’m at a competition, a click or two there is usually what’s needed, so please don’t ask if I click over 10 clicks worth does it still follow the first shot, or hold off 3 whole MOA, because of course not it wouldn’t.

And remember, this is at 50 yards.

Has anyone tried using Delrin for moderator baffles? It's easy to machine..easier than aluminum..

I'm thinking of making an attachment to replace the RTI barrel centering part with the teeny-tiny (semi-useless) holes. The hole size just seems insufficient to allow air to pass into the shroud, plus half the hole OD is blocked by the part's O-ring.

The concept is to replace the RTI part and make something like a muzzle brake that will be contained inside the shroud and shroud end-cap. The part would double as the barrel centering device and allow for unrestricted air flow back into the standard ~1" OD shroud and around the barrel..

I could probably use aluminum, but feel it would be easier to test something made with Delrin..if it's strong enough.

Yesterday while plinking I started getting extreme variation of fps. I noticed the Guage on 1st reg would pop back to 180, settle at 170, slowly sink to 140, stay there a few seconds and then repeat the whole thing. After a few cycles it would settle on 150 and stay there until the next shot. The reg was set at 160. The 2nd reg is set at 140 and is rock solid. Any suggestions, lame or serious would be appreciated.

Thanks, Jim

My neighbor's eleven year old son killed his first buck late Friday afternoon, a four pointer. One shot through the heart. Dropped him where he stood. Saturday afternoon he picked up eleven doves. He said he lost two cause his grand daddy had the dog. His daddy's feet haven't touched the ground yet. Then, Monday afternoon he killed three Armadillos in the backyard with a old .22 caliber break barrel air rifle. What a Labor Day weekend ! Armadillos, I still find it hard to believe those sum beeches are in the South Carolina low country.

Anyone ever try out this combo?

Gonna try it just for the hell of it.

Just waiting on the piston seal now. Wondering whether it will even be compatible as the vortek spring is shorter than the OEM weihrauch spring.

I know it’s a long shot, but… why not!

Looking to trade my “Like New” Nightforce NX8 2.5-20x50 F1 Mil-C



For your:

Nightforce NX8 2.5-20x50 F1 Mil-XT
Or
Nightforce NX8 4-32x50 F1 Mil-XT (plus cash)

I’d prefer a dirty reticle.