Hello,
I am going to rant here a bit. I'm new to hft and I'm a left handed shooter. I'm not new to side parallax wheels cause I ran them in prs matches BUT I absolutely hate them for field target. I don't like reaching over or holding the gun with my right hand to run the scope wheel with my left hand. As much as we use the scope wheels it's a pain in backside. I don't like for rifle or pistol. Is there any solid front AO scopes out there that goes down to 10yds. Also, I can't afford Kahles so that's out. Lol. I know UTG makes a 4-16 and 6-24 with a 9 mil dot reticle. How good are those at ranging? I know you will say just get used to it but I just can't.

Thanks
Jon

In great shape with perfect metal and just a couple of very tiny marks. I would rate the gun at 90% condition or better. It's all stock shooting crosman hp at 700plus . Looking $550 we split shipping you pay pp fee of gift. Please be a member with good rating . Would love to sell in person also ...I live in RI this is just for gun no scope

Gamo Urban leaking from the breech and barrel.
It dumps the air in a few minutes through the barrel and breech.

I tried to open it up to replace o'rings but I could not get out the valve screws.
More details here: https://www.airgunnation.com/threads/screwed-to-death.1292863/

I have attached detailed photos.
I used a Dremel to cut slots in some of the screws trying to get them out.
The valve screws seem stuck.

Inside the moderator it has a 3D printed insert which makes it more quiet than stock.

It comes with a 3D printed single shot magazine and the original magazine.
The original magazine has a small piece of plastic missing which prevents you from using the first 2 pellet slots, but the remainder 8 pellet slots work.

All the parts are there and will be shipped this way.

Doesn't the township know us air gunners have better ways of spending our money. Summer tax bill

I have to many PCPs The problem is I have the brands that do not normally need work, But after 10 or fifteen years ) rings go bad,
I bought a Mutant with a slow leak , I thought it would be an easy fix, I could not find any forms showing how to disassemble the gun .
Seems like we need a site where each gun is listed and shows how to repair it. I sent the gun off for repair , A day latter my 15 year old Cricket started leaking , I am now looking for (How tos on the Cricket) I got another Mutant I have shot the snot out of it still holding air, I have a Veteran 25 bought when they 1st came out still holding air, I got seven other PCPs , I did put a Oring in my RTI Prophet , But that gun is so simple a monkey can work on it, LOL.
WHERE IS ALL THE BOOKS AND HOW TO POST?
Mike

Why does my crown start off in the mid 900's and then gradually drop to the mid 700s fps?? What am I doing wrong here?

Since I have the day off I decided shooting was in order; given that this is the 4th of July. In setting up I was musing about when I started taking airguns seriously. That was a while ago now, but I do remember it well. So, in honor of that memory I put the PCP down, and pulled out the ones that started it all. These are the guns that taught me what airguns could do. What airguns are about. And in doing so I was pleasantly reminded that these beauties offer an "Independence" of their own. No compressors, or hand pumps required. So today I'll be putting these classics through their paces, plinking, and taking it easy. It's a good day to remember where it began...

Sold. Final price $1800 shipped.
I bought this rifle new from AOA a little over a year ago.
It was damaged in shipping and was clipping pellets, I returned it for repair and requested everything replaced from the block forward.
Shane replaced the barrel, shroud and moderator with new parts and it’s shooting phenomenally now.
Here’s pictures of groups shot at 50 yards by AOA.
I also have a .177 RedWolf in the red laminate stock, the .22 is in a midnight blue stock.
You can choose what color you want because I like either one. I’m not selling the .177 RedWolf, only the .22!
The .22 RedWolf is in like new condition and has only two tiny flaws.
There’s a chip of clear coat that is under the fill port (see picture), and the factory anodizing is not perfect on the screen side of the block (see picture).
Rifle has no issues and has just been serviced by AOA and is still under warranty.
Rifle comes with a 20 MOA Droop compensation picatinny rail, one magazine and a single shot tray.
I’ll include the rest of the tin of Rangemaster pellets so you can see how good they are, the rifle just loves them.
Asking $1800 shipped in the CONUS double boxed and insured.
PayPal is fine and I’ll pay the fees, no friends and family.
A check is also fine, I’ll ship after it clears.

Has anyone tried these pellets yet?
I just received them from AOA with my RedWolf that was repaired and returned.
They look similar to the JSB redesigned but they have no weird flyers.
Here’s groups shot by AOA at 50 yards using my RedWolf.
I tried them yesterday at 100 yards and they are awesome, it was really windy so the groups were not very pretty but I could see how good they were.

Hi, I would certainly be appreciative, If anyone that could possibly point me in the right direction to get an inexpensive PCP Air Gun 30 cal or bigger.

G,day, Hoping to get air gunning soon, interested in the above with the AR style chassis, .22 cal ,many in use here? Feedback would be good. Mal in au.

Hi I am new to pcp airguns and have a fx maverick , while attempting to adjust the regulators I removed the bottle and and bled the system of air , while attempting to repressurize the gun air leaks out of the barrel , the valve is obviously not closing, I inspected the valve and valve seat there appears to be no damage , I also accidentally fired the gun with no air which know you are not supposed to do , I cocked the gun to take pressure of that valve it still leaks , any help is appreciated

Father in law has been seeing coyotes on the driveway cam pretty early so thinking of setting up the predator call and proning out in the bed of the truck to see if I can call one in. Got the Prophet tuned up with 23 gr NSA slugs shooting 880 fps literal one hole groups in my basement range. Can go hotter but the groups open up slightly. I size them down to .2157 with my NOE bullet sizers. They have chickens on their small farm and I am sure that is what the coyotes are sniffing out. Probably be 50 yard shot.

I have a Airforce Texan for sale, I bought it new on3/30/23 from PA. It has a power upgrade from Trajectron, CF 4500psi bottle 500cc . stock was 3000 psi up grade allows 3600 psi, i have the stock bottle and hammer and spring. and ill throw in a

LimbSaver unisex adult Standard Barrels and Barrel Parts, Black, 0 US. asking$ 700.00 firm. shipping we can split the difference? ship in the us only and payment thru Pay Pal since the upgrade the safety does stick from time to time but it frees up easily, could use some lube.

I had the ATN 4K Pro on my Ghost .25 cal. Pulled it off and went to mount my Aztec 5.5 x25 scope. Put it on, tighten the Picatinny Mounts. Mechanically zeroed the scope, full one way, than full the other, back to middle on both the elevation and windage. Set up a 3x4' Piece of plywood, black dot in the centerish. Two shots, at 35 yards, both missed. Hmmmmm, Set up a 2x3' piece of plywood 10 yards off. Black mark centerish and fired. WOW 13" up and 3" to the left.

There is no way on Gods green earth that the knobs are going to compensate for that at 1/4" per hundred yards.

Suggestions?

Smitty

where is the best repair for TX200 ?
the gun jams while cocking , i pull the under lever down , it catches but will not release , i pull tension on the lever and squeeze the trigger , it releases the spring till the beartrap catches , then again put the lever under pressure release the beartrap and relax the spring to uncocked position . this happens every few shots .

I have for sale the following list of .22 caliber Pellets with Free Shipping to lower 48 States $80.00 for all 7 Tins, read description and see photos. If you have a questions or want to make an offer please contact me.

I have these listed on my website so they can be purchased with a credit card.
www.uncletomsplace.net

To be sold as a package only including the following 7-Tins:
New Un-opened Tins
1-Tin, 200 Pellets RWS Superpoint Extra
1-Tin, 200 Pellets RWS Hobby 11.9gr
1-Tin, 500 Pellets Crosman Domed Ultra Magnum 14.3gr
1-Tin, 500 Pellets JSB Exact Jumbo 15.89gr

Opened Tins but almost full (see photo)
1-Tin, 250 Pellets JSB Exact Jumbo 14.35gr
1-Tin, 250 Pellets JSB Exact Jumbo 15.89gr
1-Tin, 500 Pellets JSB Exact Jumbo RS 13.43gr

Thank you,
ThomasT

I watched a video about a Chassis for an airforce Talon or Condor, I clicked on the link to go to his sight and it was gone, poof, vanished! Does anyone know what happened?

I'm selling my Fx Dreampup .22 with all accessories ( scope, ring, compressor, ammo, shooting bags and a couple rests) I have. It is local pickup only (Youngstown, Ohio) and it's a package. There is a lot of stuff to go with it not pictured. I haven't shot it in 1.5 yrs due to time restraints. Not separating it. $1200.00

I know all you .177 Chris Kyle’s will talk about shot placement .. That being said , it’s not always about the perfect shot..
sometimes it’s about removing the vermin at all cost and your window is short timed.. That my friends is when you depend on wound Chanel opening. The only way to open them up is big wide holes with big wide pellets.. The .25 in 30+ ft lb guns does this really well

This was taken with a very fast placed offhand shot at 25 yards ,as it was a matter of need to remove before the situation was gone..
I can always depend on my 32 ft lb Firefox break barrel to do its job.
The entrance was perfectly .25 or bigger and his lungs were blowing out the exit .. quick disposal of vermin with out having to hit the eyeball out of a fly .. There are no .177 guns that have this ability as they will shoot through with minimal wound Chanel and ,they WILL run away and die , potentially in your attic or somewhere else bad.. it’s why there is no replacement for displacement..

as Chris Stapleton says , THATS THE DIFFERENCE!

Up for sale is my Vulcan 2 tactic , in Pristine condition.. Tuned by Derek wall who also installed a power plenum.. Rifle shoots Very well as seen in The attached video link.. will sell with mounted Hawk scope, Vortex bubble level and Harris bypod and DonnyFL moderator for $900..buyer pays for shipping cost.

Air Arms TX200 .177 caliber right hand walnut with spring action. Excellent condition overall. Payment by bank or postal money order. NO-no no way paypal, they suck in so many ways. $665 CONUS To-Your-Door. Private message or email. Great air rifle IMHO.

If you have been looking for a LGV there's plenty on sale at AoA pre-owned

I sometimes feel I am letting the airgun community down, certainly the airgun industry.

I have been ogling a few quality PCP rifles – Daystate, BRK, Air Arms & FX. I also recently sold an unrelated item and have a bit of cash to spend. But I just can’t make myself pull the trigger.

I have indulged in other interests and gone down many a rabbit hole, acquiring lots of the associated goodies along the way. Much ends up as just more stuff little used. Recently revived interest in shooting and am doing so with airguns. Trying really, really hard to not go down another rabbit hole. Did so a little early on but have sold a couple of extraneous pieces. Lesson learned from before: more stuff doesn’t always mean more enjoyment.

I find that I do well to shoot what I have often enough to master those. Plus what I have are so simple to use, a springer and a SSP match rifle and a SSP match pistol (all high quality no junk, cry once). No compressors and the associated accoutrements and maintenance, no tanks to buy and refill, no fuss, just rifle, scope and pellets. Bought quality so no need to ‘upgrade’ to the next latest thing.

Mastering the springer is notably improving my skills with the other two, certainly not world class shooting but getting better, still pushing myself to improve. More stuff, different stuff is not a substitute for developing one’s skills, another lesson learned in other pursuits.

Sorry I am not doing my part to fit in, be one of the cool kids. Sorry, industry for not buying more and more stuff, not just pellets. Sorry I won’t be asking how to turn my .177 springer into a .50 cal. elephant gun as entertaining as that nonetheless might be. Obviously I’ll have no You-Tube videos forthcoming, watching skills develop is like watching paint dry. Thinking I should turn in my airgun man card and accept my public shaming for not keeping up.

Sorry.

Every couple months my Lelya goes unregulated. I have to replace my reg orings then it’s fine for a while. Was just curious if anyone else experienced this with a reg in their Edguns.