I have a beautiful 2019 .30 caliber Uragan offered at $950 PayPal friends and family sending 50 grain knockout slugs at 900 ft./s humor regulator tuned at 170 bar shoots lights out 150 yards this thing is rocksolid. Will come with a 10 of knockout slugs, as well as a bag of NSA 43 grain slugs, which herb moving at about 950 ft./s. Also dead accurate.

Scope, not included, strike eagle vortex, 1-8x LPVO with mount can be included for an extra $400. All sighted in.

Let me know if you have any questions, plenty of positive feedback here. Thank you.

James Wood

949-363-3011

[email protected]

Any reason not to get this kit?

I have a Brocock Sniper XR Magnum with the Safari stock in .25 caliber for sale. Condition is excellent. The gun has maybe a tin of pellets through it. I have a RW HP in .25, a Huben K1, and a @zx10wall tuned Uragan in .25 so the gun doesn't get much shooting at all anymore. Time to hand it over to someone who will shoot it. Plenum reg set to about 150. I have shot JSB M2 33.95gr at 935 FPS (FX Chrony) and it will drive a tack at 50 and 100 yards. The gun is way more accurate than me. Comes with the BRK magazine and a CARM magazine. Scope, mounts and moderator are not included. $1550 TYD using PP F&F. If you want a PP invoice, I'll tack on the 3%. $1000 shipped if you would rather have the synthetic stock (I have both). The safari stock is something else... Please ask if there are any questions.

Hello everyone,

There seems to be a GX CS4-i model aswell with build in 12v converter on Alibaba(from the official factory of GX).

Link on alibaba : https://www.alibaba.com/product-det...html?spm=a2700.shop_pl.41413.9.1fde6f95ekdTs3

I'm kinda interested in this model but there isnt a grease pot like the normal CS4. Instead it says now "grease filling". I'd like to know first how the grease should be filled on this model.

Does anyone have an idea?



There is a YouTube video aswell :

would like to hear about anyones experiences with lower speed slugs,
specifically in the 790 to 820 ish fps range.

i have been wringing out the rainson edge and trying out both barrels......

.22 barrel reg at 135bar shoots jts 18gn pellets at 900fps amazingly well. (full mag 13yd groups i can cover with an aspirin)

.25 barrel seems to love LOVE h&n 28gn slugs at 795-800fps,
and when i say love i mean LOOOOOOOOOOOVE LOL

it shoots both the .249 and .250 h&n slugs very well,
but the .250 standard hp slug (not the II version with the deeper hollow point)
is really really good.

i left the reg at 135 when i switched to the .25 just to get a baseline,
they came out at 795-800fps
out of curiosity i started shooting groups with them,
and was amazed they shot just as good and better than pellets,
and it just does group after group very consistently like this.

heres a picture of a few groups,
yes its very close range (13yds)
but for the larger caliber slugs to beat the group size of pellets,
well,that impresses the hell out of me lol

2 groups on the left are with the .250 hp II 28gn,
a 5 shot on the end,and then 2 more shots.

the 2 groups on the right are with the .250 hp 28gn,
a 5 shot on the end,and then 2 more.

I have been ill for a few days. As a means to kill some time I did a pellet prep bing yesterday. I prepared about 3000 pellets for the final lubrication phase for use in my TX200. I don't do that phase until I am ready to shoot them.

I typically use AA Field Heavy 10.3 grain in 4.52mm as they work well in my rig. They are usually very clan with a consistent head size. As such I do not generally clean or sort by head size. However when I get an inconsistent batch I do head sort.

I sort into bins routing to the nearest 1/10th grain. It usually takes 4 bins. I pull any damaged at that time as well.



After that I then set them up for lubrication. I use bees wax. I stand the up to keep the lubrication from getting behind the skirt.



I have been told I am perhaps overdoing things.

OK.

I watched on youtube the Air & Gear of Extreme Benchrest Qualifier from 10 months ago.
At benches 11 & 20 each shooter had bipod with an elivation/windage handle and am wondering
where I can find one?
Thanks for Your Time !
Pete

So is there a way to search the classified ads on here?

While the filming for the new season is all wrapped up, we wanted to give you a sneak peak of how we get some crazy slow motion footage. What camera are we using? We use the Chronos 1.3 to get this type of footage.

So I have an S45 and it takes a fill to 300 bar. When I connect my air tank it will only fill it to a tad over 200 and stops. Anyone else have this issue? SCBA tank is full.

If it was my home they wouldn't!

mounting nikon p223 on my Avenger. With the rings already on scope I have VERY small clearance of barrel(like 1 sheet paper thick). Is clearance on airgun as important has ceneterfire? Has you can tell, I'm new to sport

Hello amigos of AGN.

I have $500 of budget to buy a good pcp for plinking and hunting Im totally open to offers caliber .177 to .25.

Only can pay through PayPal G&S

Thanks for watching

I purchased a new 17.7 tw .590 o.d. LW blank with no choke .248-.254 to test the 50 gr atp. It shoots 33.95 gr pellets great. I only tried the 2 projectiles in it. $120 shipped. Thank you. Mark.

LINK HEREThe Sortie Tact on Sale this Weekend!

I bought a naked prophet 1, a short barrel, and a small bottle for it to make a true compact air rifle, so I put it together yesterday, pellet pusher first, then the barrel, the shroud and end cap, the bottle and regulator, then the butt plate. No issues at all, it was as easy as it could be. Until I filled the rifle.
I had a prophet 2, I rebuilt the regulator, put it together, and worked flawlessly on the P2, but something is wrong, the regulator should be around the 50 bar mark as the set screw is backed almost completely out as in flush. But as I fill it the reg pressure matches the bottle pressure to 160 bar, am I doing something wrong that is obvious? Because this is blowing my mind for a day and a half now.

Hey, all, I need assistance on the certain chrono that folks found excellent enough to do what’s needed w/o breaking the bank. I recently got my bro in law into pcp’s and you all know the investment it takes to get started from having no pcp experience at all, so I’m trying to help him with a decent “must have” without breaking the bank or having my sister beat his a$$, ha ha!!

It’s the chrono that reads I believe in FPM(?) and is found on amazon for I believe less than $50? I tried searching thru amazon but theirs a ton of different types and I know at one time there was a popular one being used by members here.

Please provide a link so I can easily forward to him- thanks a bunch, all!!

Will be replacing the stock 14" barrel on a Crossman 2289 Backpacker with a 24" barrel increase the velocity (fps)? And if so, by how much? Only mod so far is a steel breech, and brass barrel bands. I've asked in all of the Crossman Facebook groups, and haven't gotten an answer.

Its with great regret that my Father Richard aka Dick Strever has passed away after several years of Battling Cancer. Those who knew him, knew he was a avid gun collecter on top of the love to compete and shoots air rifles. Sadly his time has ended and is now at peace and with god.

My mother / Dicks wife has plans to sell 99% of his gun collection. The guns, the ammo, anything related to air rifles. Over the next month i will post pictures of as much stuff as i can. Or if anyone here has suggestions as to the best way to sell everyone off we are all ears. You can message me anytime. sorry not much on words so ill leave it at that.

If anyone knows of any other forums my father was on, please let me know so i can post there also.

Vortex Viper PST Gen II 1-6x24 is what im looking at but want that razor reliability but cant afford the 1500 right now

100% of my interactions with fellow air gunners are here on AGN or on the new HAM site. Some members here are lucky enough to shoot with friends and to make friends in competition. So their interactions are more interpersonal as well as online. I don’t pretend to know anyone here, whether through their “public” postings or “PMs”. The only thing I “assume” about them is that they are good people and they like Airguns. Recently I disagreed with a members’ public posting and expressed my opinion. Back and forth PMs ensued. We both agreed to chat on the phone to better clear the air. Big mistake on my part. It ended with me being seriously disrespected… by a person I held in high esteem. This left me perplexed as I at no time disrespected him. I’ve reached out to him via PM, realizing that in the heat of “his moment” he simply lost his temper? But no reply, it just irks me how he continues to post blithely, without acknowledging any wrongdoing. If he treated me, who he doesn’t know this way, will others who fall out of line, get the same disrespect? Oh well… Live and learn. And no I won’t be divulging, publicly or through PMs. He knows who he is… Reach out to me and let’s make amends.

My American Air Arms .30 caliber 100 yard bench and coyote rifle.

Rifle : American Air Arms Evol Paradigm
Optics : Valdada Optics G2 Mini 4.5-28x50
Bipod : Valdada Optics Anvil
Rings : Valdada Optics

And a quick 27 at 50

I put this together using a stainless steel tube and huma end parts. a new superior heavy liner it shoots great I went with a 800 mm instead for the power. $200 shipped. Thank you. Mark