GRS Crown in .22 600mm barrel. Gun has the tungsten hammer upgrade. Scope, rings and moderator Not part of the sale. Comes in the factory case. $1800 TYD Now $1700 Now$1600

So I am looking and very interested in something a member has on here but he also has a second item that is slightly appealing. Is it viewed as rude if I were to ask for a better price if I were to take both? Generally when people sell cars and such they account for some wiggle room, didn't know if that is also the case with these kind of items?

AA S410 Walnut stock in .177 for sale. Comes with 3 extra magazines. $850.00 Very clean rifle.
Updated fill port to a standard foster fitting.
Let me know if you have any questions or need more pictures.
Buyer covers shipping costs.

I have a 22 and a 25 caliber. Both are equally accurate and work very well. Both have had triggers tuned to about 8 oz Pull. I have shot half inch groups at 50 YDS. both have extras. They weigh less than 5lbs. Shipped in original boxes. Only selling 1, take your choice.
If interested message me and we can work out all the details. I have lots of feedback. $400 shipped TYD

HW97K .177
I’ve been trying different springers.
I bought this one and I don’t think it’s ever been apart.
It has some extra holes in the dovetail from the previous owner
As I recall it shoots 14fpe. Jsb 8.44 @860FPS
$450 shipped

Thanks for looking,
Ken

I went hunting the other day, and I saw the perfect squirrel around 75 yards away, so I thought this would be a no brainer shot with my FX Maverick VP .30cal and my ATN X-Sight 5 5-25x LRF Scope. My groups with the FX Hybrid slugs at 100 yards are just over an inch, so I was not too concerned about my ability to take this shot, so I took my time and let the slug fly for a certain heart/lung shot that I'm so fond of.

To my surprise, I was not awarded with the thwack I've heard countless times before, and the squirrel seemed not the least bothered by my attempt to take his life in exchange for a place on my dinner table. So, now I'm second guessing myself. There is a slight breeze from east to west, so I decided to hold for wind 3 mil, and to my surprize and disgust, a brach just to the left of the squirrel's head exploded into splinters! That's it, I'm calling it for the day, as something is clearly wrong with my setup, but what was it?

• Did my new DonnyFL QD mount fail me in some way?
• Did I accidentally bump the barrel while I was maneuvering through the woods?
• Did my ATN Scope go belly up and not hold zero because of another bug I've uncovered?

After loading up the video of the shot in my video editing software, I conformed the 120fps footage to 24fps, and then added additional slo-mo effects to get this shot as slow as possible. Again, I am completely dumbfounded! How is it possible that I'm so far off on the horizontal (just under 5 inches by the looks of it), but my Ballistic Calculator has got the much harder horizontal axis exactly where it should be?

And then it hit me like a ton of bricks! I was awakened a few weeks ago with something walking on my roof in the middle of the night. Thinking this was either the Delta Force rappleing in because the country needs my help, or it was another pesky raccoon! With the sure money on a raccoon, I swapped out my ATN X-Sight 5 scope for my THOR 4 thermal scope on my Maverick. With no sight of a trash panda, I swapped the X-Sight 5 back in, and went to bed.

I am now convinced that the ATN QD mounts claim for return to zero are exaggerated, or are they really? What is considered proper performance for a QD mount that is true return to zero rated?

Can I expect 1/4 MOA repeatability at 100 yards with one of these pricy return to zero QD mounts like the Scalarworks or LaRue mounts below? Has anyone been able to achieve the repeatability levels I'm after with a QD mounted scope?



Or am I chasing a unicorn, and the only way to repeatably hit a 50 cent piece at 100 yards after detaching and reattaching my scopes with QD mounts is to do a zero afterwards?

Thanks so much for your time and input!!!

Almost new and it looks like it. The only smudge on the finish is where it screws up against the barrel. It is 1/2x20. Price is $125 TYD in the lower 48. PP F&F is fine.

I took out my old outdated MKII in .25cal from the safe today. Due to some health issues and work I had not shot this rifle in approximately 15 or 16 months. Both both regs were sitting where I had them set and the NSA 34gr slug hit where I had the cross hairs aimed at 55 yards. Maybe I don't need to buy the latest and greatest after all.

Hello AGN:

I have a like new condition FX Pocket Chronograph V1 available for sale; chrony works perfectly and is very easy to use with the FX app on your iPhone or Android device. Comes as shown in the photos below. Price is $165 shipped...

I've got plenty of references here so please feel free to check them on the Member Feedback forum prior to purchasing. Paypal Friends & Family payment is prefered (otherwise, please add 3.5% to cover the fees). Local pickup in the SF Bay Area is available as well.

Thanks!

Wondering if anyone else used the holidays as an excuse to buy another airgun for their collection? I did, bought two Webley rifles. First one was a Mk3, and the second was a MK2 version 3 Service rifle. Guess I need to find a MK1. I feel luck to found both these rifles in collector grade. Cannot wait to shot them once I get back home.

Andy

For sale here is a FX Panthers 600mm .25 caliber with both a pellet liner (currently installed) as well as a slug liner. I’m also including a tin of unopened JSB Diablo 33.95 gr pellets as well as an addition FX magazine. This rifle is a solid shooter with pellets (never used the slug barrel), only reason for sale is I have minimal time for shooting and have a couple other rifles and this one just sits in the safe. Rifle is in like new condition and only has a tin of pellets through it. Scope and Rings not included. Asking $1850 and we can split actual shipping and insurance.

HW44 in very good condition. Comes with 2 clips, fill probe and a tin of pellets. Asking $825 shipped and insured.

Weihrauch HW44 Air Pistol, FAC Version

• PCP
• Integrated manometer
• Ambidextrous manual safety
• Ambidextrous grip
• 200 BAR / 2900 psi fill pressure
• 10-shot capacity
• Regulated
• Weaver/Picatinny accessory & scope rail
• Integrated open sights, rear is fully adjustable
• 2-stage match trigger
• Includes suppressor

Lots of people wanted pics but no takers.

I think I will just keep them. They’re too nice and shoot too good.

I have ended up with a mint R9 in .177 and .22 and I'm going to sell one of the two.

The .177 has a Macarri upgrade in it. The .22 came from Flying Dragons and Mike did his magic to it before he shipped it.

Both guns are in great condition!! Whichever sells first I will keep the other one. They are both equally accurate.

I'm asking $425.00 shipped to the lower 48. Scope not included. If you want pics PM me and I will send them to you. You will be pleased with either gun.

I've bought and sold many airguns on this forum.

I'm gettin' a hankerin' for a new airgun. (look it up if you don't know what a hankerin' is) I own an FX Impact M3 .25 cal. 600mm barrel. It's pretty much stock except for bolt-ons. I shoot targets and spinners, etc. only - not a hunter. Most of my shooting is behind my workshop being, 30~65 yards. I want to stretch my legs - and abilities a little and I'm thinking about a .30 cal. slugger for 100+ yard fun and competition. I'm considering BRK Ghost, AGT Vulcan 3 and RAW HM1000X - and open to others.Thought about a Panthera but afraid it might come with pretty much the same issues/challenges that my Impact M3 has. I like my M3 but as we all know it's a tinkerer's delight so I get my fill of tinkering and adjusting with it. Also, opinions on caliber are welcomed. I figured .30 for outdoor long range might be best. Air and shot count are not an issue. As my signature says, "hole-in-hole is the goal." So, your thoughts? (or wait around for something that may be coming soon? )

A package delivered yesterday I opened this morning. Busy yesterday taking down Christmas decor. More tools, yay. Got punches for split pins and a set of Wera micro drivers. I‘m getting ready to install some more spring sets I‘ve accumulated over the last year, 15 sets. I have three different manufacturers for comparison. Also have approx. 10 sets with identical cylinders and caliber for fair comparison. I have 4 sets of Vortek en route as well, when they arrive, I will probably start shortly after. I have piston seals for all and will all be replaced. Have a few different lubes to try as well.
A few months ago I bought a screwdriver bit set by Chapman. Had the Wheeler set. The Chapman set easily wins, for quality, IMO. I use the pine V-block to hold the cylinder when removing pins. I will make another, but shorter with same dimensions so I can straddle the cylinder. Works fantastic. The 2 maple pieces by v-block, I use instead of a wrench to open the cylinder on a few Weihrauch’s.
The Master Vice is exactly that, second to none, very versatile, rigid and safe. Looking forward to the fixes. Winter has its advantages. This is my favorite part of airguns.
Always open for suggestions. Crow … Happy New Year

Hi Friends,

Up for sale:

Make: FX
MODEL: IMPACT
VERSION: M3 SNIPER
CALIBER: .30
PRICE: $2100.00 SHIPPED TO LOWER 48!
NOT TRADES AT THIS TIME
CONTACT: [email protected]

*RENEWED ON 3/5/2024*

ADDITIONAL ITEMS FOR SALE:

1) BRAND NEW 580CC FX CARBON FIBER BOTTLES FOR $300 SHIPPED! QTY 4 AVAILABLE
2) BRAND NEW PANTHERA .30 CALIBER $1700 SHIPPED QTY 1 AVAILABLE

Description:
NEW in the box with all standard included accessories. Price includes shipping anywhere in the lower 48 USA states.
Gun has been fired to confirm factory velocity settings. If you have any questions please use the contact information provided.
Email me with your phone number if you have any questions.
Buy from a trusted source!

UPDATE:

I was able to find an amazing deal on an Daystate Air Ranger in .25 (mint condition, only shot about 150 pellets by owner)

I will post pictures once I have the AG in my possession.

Question: Can anyone help me pick the right accessories to fill the Air Ranger.

I am purchasing a GX PUMP CS3 compressor. Would a Air Venturi Male Quick-Disconnect, 1/8 BSPP Female Threads work to fill the Daystate?

Thanks!
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________






Hello everyone,

I asked for input on this topic on another forum that has a lot less traffic. I got some good responses but I want to ask the folks on this forum the same question and get some input from a much larger crowd.

I have been a long time AG enthusiast and have always used a break barrel or underlever spring AG.

However, I am not as good of a shot I use to be once and shooting a spring piston AG adds to my difficulty of making consistently accurate shots.

Long story short, I am looking for a .25 cal PCP for my max available range of 50 yards. I do some paper punching but am looking for a solid performer to take down squirrels, mole, fox and racoons terrorizing my chickens.

I am not sure about how much I need to spend on the PCP rifle + a compressor. I certainly don't want to cheap out because I know from experience in AG world, you get what you pay for.

Things important to me:

1) Great trigger, as I know my current struggle to be accurate with my spring guns also comes from not having the best triggers and hold sensitivity.
2) It needs to have a magazine.
3) Good to great build quality
4) Adjustable power
5) Regulated
6) Needs to be quiet from factory or be able to add a suppressor/shroud to quiet it down. Do not want to alarm neighbors.

Anything else I am missing from the list of what's important ?

I have looked at a couple of websites and have seen .25 cal PCPs from the likes of Air Venturi Avenger-X (~$500 range), Benjamin Kratos (~$700), and on the more expense side Air Arms S510 Xtra FAC ($1,500).

I know I will get many different answers but given the limitation of my max range. I need something that can get 1 inch groups at 50yrds.

I really appreciate your input.

I've always thought the PCP guns were cool, but I never dove in because of the high initial cost. A compressor, air dryer, a chrono if you really want to tune them....
But today I finally but the bullet. I ordered an Avenge X in .22 cal. from Pyramid Air. The shipping options were kinda funny I could get it in 3 days, and had the choice of free shipping, or paying $17.00 or $30.00 to get it the same day. It was a tough choice, but I went with the free one. Hope I made the right decision.
This will be my first airgun in anything other than .177. I agonized over which caliber to get, way more than I should have, especially because it can be changed pretty economically. I'm looking forward to learning lots of new things. The Search function here has lead to a lot of reading. I'm sure I've got a bunch more to go.
Joe

Hello everyone old guy retiring soon. Ordered a BRK Ghost in 25 cal. Have large property with critters that need to go! Any advice on set up and fill up much appreciated thank

I am reluctantly offering up an Extremely Rare Bird
RTI PP1 Compact with a CZ .177 Barrel

I searched for this little bad ass for over a year before finding one.

History of the gun:
I am the original owner, i purchased this New from AoA in May of 2023
I am Very anal about All of my guns as far as upkeep and maintenance
The gun is in 99.5% condition, only marks are very slight on picatinny rails where scope and bipod were installed

Current Gun Setup:
The gun is dialed in with the JSB 10.34gr pellets, and JSB 16.20gr pellets
10.34 are 830 fps average
16.20 are 780 fps average

Both of them are Dead nuts, stack pellet on pellet out to 40 yards with shooter doing their part .
Your choice of how hard you want it to hit the intended target.

Getting 60+ Shots on a 250bar fill, Gun is capable of a 300bar fill

Add On Parts:
RTI Power Plenum
KLS - PRS Buttstock and Bag Rider combo
3 x 15 Round Magazines
RTI Hard Case
All Paperwork
All Stock components that were replaced are included.

Reason For Selling:
Only reason I am selling is I am getting out of .177 all together.

I do Not have to sell this so please be respectful and resist the urge to lowball... This is Not a gun you will see for sale that often.

Here is what i have in the gun money wise:
Gun, 1 x 15rd mag, Hard Case = 1535.00
Spare mags, 2 x 15 round = 127.90
KLS Buttstock = 189.00
Power Plenum= 49.00
Total = $ 1990.90

I am asking $1225.00 for it as listed ( No Bipod )
Shipping is $35.00 UPS, Insured, Signature Required
I will include 2 tins of its favorite food ( 1 x 10.34, 1 x 16.20 )
USA Only

Haven't got time to post details and pics, so if you have interest in her, feel free to call me for pics, and information. I'm just starting to figure out pricing. I'll get caught up on updates in the next few days.so here's what I'm offering;

Daystate Huntsman Revere Safari 22cal unfired by me. 3 mags bought new UNREGULATED $899

A1 condition.
CALL OR TEXT. All others will be ignored. Thanks, Bill and Addi (I'm Bill) 503-504-708four. Price includes shipping in conus.

I have tried looking up the requirements for an air tank to be DOT approved. Dealing with such high pressure (4500psi) I would like to know.

Have been looking at AEA , because the are an entry level gun. Looking to stay in the .3 to .4 cal range. Looking for recommendations.

Got hold of a slightly used M3 for 1300usd with digital preassure gauge, saber tactical top and under rail in .177 today.
I want to buy a liner kit in .25 but dont know if I should go 600 or 700mm. IF I go 700 i have to take off my air stripper everytime i but it in case, and I like the look with 600mm better. And is slug probe a "must have" in theese when shooting slugs?
And how do I adjust preassures and stuff cuz the manual didnt Come with it and I cant find any obvious screws to adjust xD