SOLD TO Pneumatic. THANKS

Just recently resealed by Firewalker here on the forum, holds air forever now.. Black Arts barrel band and brand new Laminate stock.. this gun is very accurate with Hades and FX 25.39 gr pellets.. will shoot 1 inch or under at 62 yds with either pellet when I do my part. Nothing has been done to gun other then barrel band and reseal.. junked the original plastic stock. Only marks are from screws/original barrel band can be seen in pics, easily covered with marker. Scope/ rings not included.
Only selling because just bought a Walnut S510 Extra in .25
385.00 sh. lower 48..

These are special models sent only to reviewers, months before the production versions will be available. This is actualy a different gun than the production model and comes with a Certificate of Authenticity with each influencers name printed on it. This one shot lights out and is address to me, "Nate". I can sign the Certificate if you want. Ultra-rare gun.

$549 free shipping. Ships well packed and double boxed. Paypal OK. You can PM me here or call or text me at 360-844-0962



Only used for one day then put back in the box. Video here:

Hello I have a FX Impact M3 and i would like to replace the fill probe that is on the gun I believe the Part number is 16303
I'm pretty sure i have a very small air leak I sprayed it with some air leak detector fluid and i have some very tiny bubbles comming out from the very end of it it's not really that big of an issue but just an annoyance. I was going to change the fill probe out but i can not find one
anywhere to buy does anybody know a company in the usa that sells them because i cant find one anywhere Thanks for your time Guys
any help would be appreciated.

I am 1 of those guy who loves to tinker. Last week I cut 1 coil off the spring in prep for this project. Today, we find out if I can make a spring guide from delrin worth having on a wood lathe...yes is the aanswer.i sold my wood lathe years ago, but still have access to 1. I bought a cheap parting tool off amazon.it arrived dull, with a light aluminum handle. Sharpened up ok. Unscrewed the handle, and filled with spent lead from my pellet trap...now it actually feels like something worth trying to work with. Cuts surprisingly well, internet claims the 65mn steel is basically Chinese 1095...maybe?makes quite a mess, but delrin is easy to cut ....really helps fill out your beard thoughthe base on mine is about double the thickness of the original. Adding back in some spring tension, while still allowing enough room to engage the sear.rifle is back together. I have only shot it once as proof of function. Definitely has a different feel to it. Cocking cycle is quieter because of how the sear engages. Before you would bottom out the stroke, hear the sear click into place, then feel/hear the piston move forward a bit before staying locked in place. Now that forward motion is gone. We shall see if this is a good idea or not tomorrow. Should be able to chronograph, and hit a few targets to see where things are at.

I'm considering a new pcp.
The Karma Red Panda.
I received an email from Karma that the Red Panda will be available in the very near future from these USA dealers.
Which one do you think will give the best before and after customer service? I'm in California, so sales taxes and shipping is also a consideration.

Thanks in advance
Rod in San Francisco

DonnyFL
The Pellet Shop
912 Airguns
Airgun Tactical
Airgun Pro Shop
Airgun Outdoors
Alamo Airguns
East Idaho Airguns
High Pressure Pneumatics
Pyramyd Air
SPAW
Tenacious Airguns
Utah Airguns

Would trade for nice SFP scope in the 6x24, 5x25, 4x16 range..

Ive owned gun for 8 yrs and has been shot very little, a couple yrs ago I put a milder Crosman spring in it recommended by a forum member on another forum but for the life of me cant remember what Crosman springer it was for. I know it was one of their well known springers, it was shooting a harsh 18ftlb and now a very smooth 14ftlb.. has less then 200 pellets thru it since spring change.. Heres the numbers for the Crosman spring taken today. As you can see very good numbers. Back when it was shooting 18ftlbs it liked 18.1gr JSB now it seems to like the H/N FTT but its not even broken in fully yet. Stock bolts replaced with stainless hex head bolts.
245.00 sh lower 48 scope base included but no scope.
H/N FTT pellets

hi-690
lo-685
ex-9
sd-2

Excellent condition, like new other than pressure marks on the scope rail. ~20 fpe version. Great way to dip your toes into the Field Target pool. Description & specs can be found here:

://www.airgunrevisions.com/product/ar-hft-challenger

Original box & paperwork included.

$600 shipped CONUS. PP F&F or USPS money order. Not interested in trades.

Will be happy to discuss and/or answer any questions you have.

What's the furthest shot you ever hit on target. Could be a target or a animal. I only use sub 12ftlb air rifles so don't see the true power and potential of these air rifles and air guns. Maybe the uk guys using FAC air rifles and USA guys using your unlimited power & anyone else can tell me what the longest shots you've ever taken and your favourite rifles to use. Springer or pcp or co2.

Bought 2 of these back in 2016 or 17 and got really nice wood on both, gave John in Pa the nicest one to tune this one. Not sure what all he did but it cocks super smooth, know he polished loading port and what ever he did with spring etc. Scope/rings not included. This gun is very accurate with 18.1 gr JSBs, nickel size groups at 32-40 yds. Ive head shot a bunch of squirrels with it out to 40 yds. Has a very nice walnut stock one of the nicer ones.. 325.00 sh lower 48

Heres chrony numbers for 10 shots today. HN FTT pellets 14.3 gr.

Hi- 771
lo- 752
ex- 19
sd- 5

Read about this tragic event here:


There's also a fund drive here: https://www.gofundme.com/f/help-joe-schneehagen-with-his-recovery

Terrible news, and worrying too. Anyone here know what happened? How/why the air tank failed, etc?

Thanks

Kim

Excellent condition Mini Wingman. Just prefer a bottle with a fill gauge. $300 TYD

With the crazy wind here in spring...I spend mornings until maybe 11 testing what I need to test outside.

This is the latest pellet/slug Thomas shooting 75 pellets on the top group and 100 slugs on the bottom group....no changes except scope clicks. Monsters at around 980 and my new .218 slugs at 850.

I could shoot the slugs all day long as they are just so predictable and great in the wind.

100 yards

This extends the versatility of this gun tremendously.

Mike

As you may allready know, if you raise a ring you change the scope angle in relation to the rings. That concentrates the stress of the scope clamps to the edges rather than an even distribution of the pressure over the inside of the ring.
I originally bought these West Hunter adjustable rings thinking they would work for MOA but they have presision locking grooves, that prevent the needed angle change.

Now that I allready own them it's time modify or replace them.
They will need to be solid as they are going on a springer.

Its Friday, the boss is off, parts delivery is slow, the pellets are flyin' until they get here

My HW97, with an opticaly centered scope, shoots low. (See 5 shot group at 30 yards)
I have since zeroed my scope to it's max adjustment achieving a 75 yard zero.



I have a set of West Hunter rings that are height adjustable, but the ring angle is fixed, so that they don't follow the scope angle when one ring is raised. The result concentrates the clamp forces to edge of the rings. That could damage a scope and void its warranty. Reading the warranty with my scope, an Element Helix, it says that damage from scope shims will void the warranty. So I've got to do this right.

So, I have begun modifying these West Hunter, rings to be height, and MOA adjustable.



I filed the grooves in the center ring, and trial fit it with good results so far. The remaining grooves in the base grab well.
I will also drill and tap a scope stop screw, which will be adjustable for height then do some testing.

Where are they made? If the UK do they have the hammer forged barrels?

Reduced Price many accessories included

Brocock Bantam Sniper HR (Huma Regulator) in .25 caliber, synthetic stock w/ these accessories...

1- KOI Donny FL Moderator
1- 3-10x Accushot rifle scope w/Range Adjust Ez wheel
2- 10 shot .25cal magazines
1- single shot .25cal tray
1- kit of maintenance parts, inlet assembly kit w/ removal tool and reseal kit
1- UTG Bipod Kit

Rifle in overall VG condition, see images of New England Air Gun consignment review form and test target.

Asking $850.00 plus shipping for rifle and listed accessories, PayPal or certified check only.
Will provide estimates on shipping if interested parties provide zip code.
Will meet buyers within 100 miles of Concord, NH

Thanks for looking.

I've been blessed with many fine airguns and as of late I have been rotating through them in no particular order...going through an alarming amount of pellets....All my PCPs are in mid season form with my Taipan Veteran ahead by a trigger...The biggest surprise and the gun thst impressed me the most lately has been the HW97 .177 tuned by buddy and AGN member LEWIS...tuned to 11.5 fpe with a TBT kit.
He recommended JSB 8.44s but I don't stock them...gave the 10.34s s go and wow! The pictured penny group is around 50 shots at 30 yards off my knee...Just couldn't miss but had to quit...gun got too heavy. Interesting the Veteran and that HW triggers make for some sweet shooting airguns! The dime group was the last group today with the Veteran...just put the scope back on it, a friend was using it on her Vet...10 shots at 51.5yds benched...typical and no sweat for the Vet...but that '97 non bench group from a springer got my attention!

Hello Airgunners,

Last week I posted my most rewarding trickshot. Fellow airgunner @Perle commented with an inspirational photo.

Yesterday we had a summer day and I had some free time and did not forgot about the inspiration of last week.

I made a short video and hope you all will like it.

Feel free to post your trick shots as a comment too.

Enjoy


Have a great weekend,
Eric

Howdy folks, Riddict here. I'm sure some of you might know me if you are familiar with the Off The Shelf Airguns YT show. For those that aren't familiar with me, I've been an airgun collector/enthusiast for 40+ years. I don't modify my guns as I prefer to keep them stock, however I always enjoy seeing what others do! As for what I do on YT, I am not technical or deeply analytic, I'm simply an entertainer who also provides real thoughts and opinions along the way.

While I do review stuff, it's very basic in nature. I'm not one to dive deep into the numbers of things, as I gear myself towards casual viewers. I also like to add a bit of comedy to what I do in order to round out the overall vibe. My goal is to keep things as simple and entertaining as best I can. I have a range of different types of content I do, from straight forward reviews, off the wall challenges, comedy skits, holiday themed videos with skits, etc all centered around this great hobby.

I am not a technical guy by any stretch, even though I do touch on those areas. I like to leave that up to the many great folks out there who can provide the deep dive, technical aspects that the hardcore groups are looking for.

Hopefully this helps folks to better understand what I do and what my intentions are. I'm all about just having fun with the hobby in a casual, entertaining way.

Thanks for reading!

Near new Crosman 1720T installed in a Challenger 2009 stock with Challenger match trigger and set to 12fpe for a sweet little carbine or fantastic youth rifle with the LW barrel and challenger trigger it's a fantastic setup. Only use was initial installation and chronographing to adjusting power to 12fpe. Asking $550 shipped CONUS for the carbine or $625 with the UTG 4-16x44 and BKL rings.

As per https://www.airgunnation.com/threads/airgun-mystery-boxes-live-tomorrow.1311752/, they are doing it again with a much larger available boxes.

So, what are y'all thinking about these? I read through the thread about the last time they did it (https://www.airgunnation.com/threads/airgun-depots-mystery-boxes.1287734/), and it seemed to be pretty worthless. Is there a chance they learned from that, or is history going to repeat itself?

From one point of view, 50/200 is a 25% chance to get something "epic". On the other hand, no one here posted about getting any of the big prizes. Are the desired prizes picked over for employees, friends and family, and everything else goes to outsiders, or do people feel this is on the up and up?

This is the first .17 that I’ve owned in a long time and I’m having fun!

A beautiful Kalibr Cricket 2 Tactical in 25 cal. It has been living in my safe since I bought it a few months ago here on AGN. 600mm unchoked barrel/ I don't ever use it and I want to make space. It comes with 8 magazines. Very impressive if you have never seen one of these. Asking 1200.00 shipped to CONUS. PP/FF preferred. Call/text Ron 714-296-7489 Scope not included but can be discussed. Check this out https://www.airgunsofarizona.com/precharged-pcp/kalibrgun-cricket-2-tactical-60-wood-.25-caliber/