My .177 Nova Liberty transfer port adjuster blew up.

When I shot I heard a loud pop and the transfer port ejected the receiver.
I never expected to have projectiles coming sideways

The same transfer port is used in Nova Liberty/Freedom, Seneca Aspen and maybe a few more.

Anybody knows how I can get a replacement transfer port ?

I really like this air gun, and it is very accurate.
That's the main reason I don't transform it into a pile of parts.

I,m looking at the .45 cal Bullpup. I find many reveiws on them on there power. But very little on how accurate they are at 100 yards.
l know a $$660 gun can not comparing with some of these over $1000 rifles. But for you that have one what kind of groups can a
guy really expect from on. I,m not daddy big bucks, just a retired guy on a fixed budget So that’s a lot of money to me. But .45 cal
is what I’m looking for, & I know they pack a lot of power. But maybe I,m asking too much at 100 yards from this gun? Your comments
please.

Fly

Hello all!

This is my first post. I bought a 1322 from Amazon. I installed a baker aluminum breech and a red dot sight. Accuracy seemed acceptable right off the bat and from the bench I proceeded to shoot off hand over the last month. I used it to dispatch a couple juvenile groundhogs in a live trap and shot a couple rabbits and a squirrel out of my garden and I've done quite a bit of plinking. All seemed well. A few days ago I installed a 1399 stock and added a pool noodle cheek rest which still doesn't get my eye up to the ideal height, but it's okay. Yesterday, I was plinking around and noticed that I was missing a medium size soup can at about 12 to 15 yd. This seemed weird because with the new stock my stability was very much improved. So I got out some paper and started shooting from a bench. It's all over the place. Don't know if accuracy was slowly diminishing and I just didn't notice it shooting off hand as a pistol or what. It's shooting like 4 in groups at 15 yards. I tried crosman domed, pointed and some Gamo hunting pellets all had the same results. I cleaned the barrel and it took forever until the patches were fairly clean. That did nothing. I took the Red Dot off and shot open sights but that did not help matters. I took the metal breech and barrel off so I could inspect things. I noticed that the bore seems off-center in the barrel at the muzzle. Also, the crown seems weird. There is a bevel on one side, but almost none on the opposite side. Hopefully my picture attaches. I'm not sure how things could have changed from when I started shooting it. I've probably got 300 pellets through it, maybe more. What do you guys think of the muzzle area in the picture? Could this be causing my troubles? It's pretty frustrating because I know this can be an accurate pistol from everything I've read and I don't want to shoot at animals if it's behaving like this. At four or five pumps, I had good lighting to watch the pellet travel against the white of my paper Target. Some of the pellets seem to just veer off one way or the other. Looking for advice. Thanks!

Here's a fun and cheap target idea. If you're anything like me, I can't focus and have good fundamentals for more than one target card, maybe 2. I found a deck of cards that has tiny clubs, hearts, spades, and diamonds. These measure at roughly .25"x .34". Try not to kill the hostage. A clean target is one shot on each symbol top and bottom. The bigger symbols can be used as sighters if you wish, but you still can't kill the hostage so be careful. Haven't really thought about how to score it. Distance is 30 yards. 50 would probably be even more fun.

This was on Mr. Hollowpoints Facebook but he is calling it a "CAT". I would like to know the real name of the gun but he is not talking.

Hi all

First off - this thread is about the modern FWB Sport, not the classic 124/127 rifles.

Since there are few Sports but many that needed a tune when new (and because I'm about to tune one...) I'd like it if those who have already been down this road would list what they did/compo ents used and what the final results were.

I'm going to make up a spring guide for both the OEM spring anI for a Titan #1 spring, and use a Vortek piston seal. I'll start with the Titan spring as it should shoot much softer, though I'm hoping that I don't drop below 12fpe. I may. As it is (stock everything) it's harsh and extremely hold sensitive.

If that doesn't do it for me, I'll go back to the OEM spring but with a tight spring guide.
I know that many have clipped a couple of coils from the OEM spring, and I'm guessing the #1 won't be too much different than that.

Thanks in advance!

$110 shipped. Old Gen. Pure pellet shooter. .25 cal. PayPal F&F

Nitro-piston rifles can stay cocked for some time without damaging the ram. Now a spring being
compressed longer will get damaged. When out hunting, do owners of a springgun wait for the
time to shoot and then load?? Oportunities may not last., cocking the gun makes noise.
Just wondering

I'm selling my 22 semi automatic walnut Benjamin Marauder for $425.

So I've been playing with the Panthera . It's a 30cal 700mm. when I pull the trigger I get a quick blast of air from circled spot in the image.. This normal?

For sale an original Nightforce FIELD TARGET 36x scope. 1/8 MOA adjustment. Has sunshade and illumination works perfect. Has slight ring marks on it from rear ring in its past.
I just sent it out to nightforce and got it back with a clean bill of health with a new QC sticker.

$1000 plus shipping
Check, PO Money Order or Zelle

Just a piece of CF tube for a tensioner kit. $15 shipped.

Does not screw on. You will need to loctite it in place. $20 shipped.

Visit your local Hawke dealer to benefit from our current rebate: us.hawkeoptics.com/where-to-buy

Epoch is on sale

Aztec Emerald 3-18x50. Includes all factory parts but missing side wheel. Couple of scuffs on front of scope- $200 shipped

Dedal 1-7x variable with eagle vision rings. With box and papers. Not parallax adjustable, but will focus 20 yd at lower power. Excellent condition! These sold for $1500 when you could get them. $1000 + shipping.

Classic Leshiy in 357, choice of second barrel. Hagan additional air cylinder. Huma reg, analog manometer. Has Buck Rail suppressor on 357. $1500 pp. Shipped. 2nd barrel 177 250mm, 22 your choice, 25 your choice, 30 ,,350mm. $1700 includes scope and mount.

I will sell or partial trade either M3 as in pics or different scope. $2300 shipped for either one decked. With a tin or 2 of ammo.

Selling a beautiful and increasingly rare Seneca Sumatra carbine in .25. Comes with 6 rotary metal magazines. Has a dent on the butt but is otherwise in excellent condition. No leaks. Shockingly powerful.

Asking $750 shipped CONUS. Zelle preferred. Snatch this one up quick before I get cold feet and unlist it again.

Hello everyone,

I made a couple of nice improvements to the Rifle Rest that I made last year. For the front and rear “Yokes” that cradle the rifle, I originally used some 3/8" stainless round rod bent to shape. I slipped some soft plastic tubing over to rods to secure and protect the rifle.

Today I used some 1-1/4" wide stainless flat bar bent to shape to replace the rod giving a lot more surface for support and securing. After welding the flat bar to the mounting plate or rod I applied three coats of liquid rubber to protect the rifle.

Last photo shows a rifle on the Rest and with this improved rubber surface area to “grip”, it is like the gun is glued in place. There is almost no movement of the rifle even when I cock it. I shot some paper targets this morning and this thing is rock solid.

ThomasT

Couldn’t spot an “introduce yourself” forum so here I am

Uk shooter (brief stint state side) , shot sub12 for 25 years, powder burners (properly) for 10 and just getting into FAC air to move away from rimfire.

Stumbled on here as I have a new FX Panthera 700 in .25, which obviously has a slow leak from the get go (have read all the threads!) , and you guys seem to be very familiar with the high power versions!

Looking forward to getting it going (have rebuilt a .177 sub12 panthera recently) and have some nice 49.5gn and 60gn altaros waiting to go

*edit* just for clarity I am just saying hello! (The forum has already answered my questions )

Had this listed earlier in the year but took it down because I thought maybe I’d carve out the time to shoot it… I have not.

2020 Huben K1 .25 with FDE stock. In excellent condition, shoots great, no leaks. Optics NOT included.

Asking $1200 shipped CONUS. Zelle preferred.