Airguns, why do we love airguns ?

The ease of shooting them, the efficiency, the precision, the underdog factor, the low maintenance ( with firearms I have to clean them every time I shoot ) and last but not least the silence.

I find a lot of parallels with my Electric bike pretty much all mentioned above.

So ? .....so I had this Donny FL sticker and figured it would sit perfectly on the tail of my bike

I just picked up an old Weihrauch HW77K .177. It is shooting around 800 fps with 8.44 grain pellets. Is this about normal for this rifle?

What are the cleanest slugs/slug makers? With the least buildup. Least cleaning.
OR Are they all the same?

Received this last week. Played around with it for three or four hours and just decided it is not for me. I like the simplicity of a traditional scope and spend what precious little time I have shooting instead of messing around trying to be a video editor.

It is in better than new condition in that I will include the micro SD card and 4 lithium batteries I had to purchase.

Not a market on it as I didn't even fire a shot while playing with it.

I have about over $800 invested in it with the SD Card. Will ship it within the continental us for a total of $550 via PayPal F&F.

I have the following pellets for sale. PayPal friends and family is preferred but I’ll also accept a money order or a check with a hold for clearance. Insured shipping is included in the price. U.S. sales, only.

22 caliber JSB Redesigned 25.39 gr Pellets – 6 Tins, 200/tin - $70.00.

Looking to buy the original picatinny rail for the bipod off of a agt Vulcan 3.

When you all are dissembling your airgun and need to clamp down your air tube, what do you use to keep from marring the surface? Same with bottles.
Thanks!

After much experimentation with FX Dreamlines and other Crowns with ho-hum accuracy, I finally got some really promising results with my FX Crown MKII Saber Tactical. I had a .177 600 mm barrel that I tried in another Crown that didn't seem to work well for me, so I put it in the Saber model that I was using for 100 yard shooting in 22 cal. I left the reg setting the same (140) and installed a Huma dual transfer port. I was able to squeeze 1020 fps from JSB 13.4 KO slugs and over 1100 fps with 10.3 slugs. I also tried NSA 12.5 and 15.0 gr slugs. The KO 13.4 gr worked the best when I turned the power wheel from Max to the next lower setting achieving 985 fps. The other slugs were not too good. At 100 yards, methinks this works pretty well for a .177 rifle. I can't wait to try some ZAN 13 grainers too.

Firstly, I know almost nothing in regards to barrel specifications and design. I do understand twist rates and their causal relationship with projectile weight. Now FX uses liners, so we’ll put them aside for this post as I’m curious about cold hammer forged barrels such as BSA and CZ , which I love. Do other barrel makers use different degrees of same procedure? If not, what are some of the other techniques? What are the advantages? I find cold hammer forged barrels generally agreeable with a fair range of different projectiles. So, barrel gurus educate me on differences/advantages of others. LW, TJ, alpha precision, polygonal and so forth. What other techniques used besides cold hammer forged? Many thanks.

I am getting a new Feinwerkbau 800 tomorrow from Champions Choice. They do not have this. I am looking for a Centra front iris that had the square in it that magnifies the 10 meter target. Does anyone know where I can get one? Possibly the cost? Finally I realize they come in different sizes so which one for my rifle? As you can tell I am relatively new to the airgun world. Thank you

I was just wondering how many fouling rounds do you need to shoot to get your gun back in to zero or good for testing

And how many rounds do you clean between the next cleaning

Today was a beautiful sunny day so I took the Ghost outside for some fun, and after shooting pin cones with slugs at 127 meters and pellets at 57 meters I felt that if i don't share some videos with you guys I would be very selfish.

Honestly the BRK Ghost is more accurate than the shooter (if tuned well of course).

Here are two videos -1- at 127 meters shooting .22 JSB KO 25.39gr. slugs and -2- at 57 meters shooting JSB redesigned 25.39gr.

I have this Impact X for sale with an Aztec 5.5-25x50 SFP MOA scope and three magazines. Basically what you see, including the case (not the table underneath though). The rifle currently shoots JSB 18 grain pellets at about 890fps and generates some tight groups. It just hasn't been my go-to rifle so it's probably better that someone else have it. It has been recently resealed and the gauges were replaced with Huma gauges. Originals will be included.

[SPF] HUGGETT Astille Moderator and 2 extension modules. 22 cal, 1/2x20.
Half price of retail at only $150 shipped
PayPal FF please or +4%

I purchased an air Venturi compressor along with a Taipan Veteran 22 in probably 2018. Health, life and a move for family health reasons they have both sat since 2020. I have filled my rifle a few times in the last couple of weeks. I’m having separate issues with my Thai pan but a fellow member in here I believe has helped me fix it. My compressor, however, stopped working after approximately 30 minutes of runtime it just shut off. It has power has the lights Behind the coolant and compressor switch are still lit. The reset button does nothing. Anyone else experience this? What was your fix? Thank you.

I was wondering... SHTF scenario, or in a location with no post service/gun shop, you ran out of pellets... but you have a mold to cast them and soldering tin.






Is it viable? will it damage or dirty the barrel?

fx drs barrel using barrel linear+oring and barrel housing….back to old style dreamline barrel ? poi will shift again?

Keep hearing about the 22 cal pumpers and springers outshooting 22rf at 50 yards and less. However, when I research them I find prices >$500. Is there a QUALITY accurate pumper or springer for < $300? Not sold on a "break barrel" as I can't see how that system is accurate.

Like new mostly stored. Fx impact .35 mk2 800 mm. $1400 shipped with

Fx hard case
UTG adjustable bipod
Saber tactical rail
2 magazines.

I'm selling this impact for a friend so when some decides to buy it or when it sells I'll have the person mail him the check and when it clears it will ship
M3 has tungsten hammer saber tactical front reg delete upgraded brass piston in reg with peek upgraded it to power block and installed a peek spacer in the plenum for first shot fix I have the rear reg washer stack set up for higher pressure I was able to sling 44 gr from the 25 cal slug barrel at 980 and had about 3/4 inch group NSA 44 gr slugs 800 mm 25 cal slug barrel and magazine 700 22 cal pellet barrel with probe and mag along with the 25 cal shrouds made by AZ i think this gun was used quite a bit but just got freshened up with new valve rod tunsten hammer orings power block which changes valve size also. 1300.00 shipped any questions feel free to ask thanks

This one got blocked by Youtube because I of course jacked the entire Voltron into, but let's see if I can upload it here as an "exclusive" for you guys!

Bummer, too, cause I had just made this bomb-ass thumbnail to go with it:



Basically I created a Voltron compressor by linking 5 shoeboxes together to fill a 4500psi SCUBA tank.... for science. On this channel I risk life and limb so you don't have to! Anyway, this was completely safe and worked. You're gonna wanna see this one.

Purchased this used from AoA about a year ago. Originally came with the long, 24.5" barrel. I bought a 410 mm barrel shortly after purchasing and added a Ratworks aluminum air cylinder which doubled the shot count and reduced the weight. Great shooting airgun. Super quite. Last shot string on 3/3/24: 756 average fps with JSB or FX 15.9, 74 shots (6 magazines+), SD 3.6. I've drilled a small hole to allow access to the hammer spring without removing the stock as shown in the pictures. Stock has quite a few scratches on it, but the metal is in good condition except for some marks on the end caps from when I replaced the air cylinder. Comes with everything shown in the pictures including the original barrel and six magazines. Two metal original Weihrauch mags and four from Alternative Mag, which I like much better. Scope not included
Priced at $850 shipped PP F&F or buyer pays fee. No trades

Hey so it’s new gun day for me, HW80 “long rang hunter “ .22 beautiful gun. Fit and finish is outstanding.

The problem I’m having is why does it make 13.5 ftlbs. The factory tag says so and so does the chronograph.

It’s not exactly the OG Magnum as described, so my question is what kinda power is everyone else getting? Also my HW77 only 6 months old is making 14 ftlbs so I’m guessing I must not be the only person wondering?

But a FAC HW80 that doesn’t make HW95 velocity I really could have save some money

my dad was my driver this morning when we checked our 2 330 conibear traps and the good Lord provided us a 100% successful harvest. One of the 2 year old beavers was still alive and I used my 20 cal hw 90 to finish the job.

177 Prophet compact

This is my last air rifle, this is painful, but I raised my right hand and I will fulfill my obligation.
It is a custom cerakoted red and grey, comes with 3 magazines, 4-16 Arken scope and a white eyler roller case. It shoots stupid accurate with Zan 13 grainers.

I am asking $900 shipped

Sorry no trades at this time.