Gents,

The summary:
Tank is at 200 bar despite the gauge reading zero.
No air is leaving this "cylinder block" to pass through the reg and valve assembly.
Can't see any obstruction.

Any ideas? I willing to accept the idiot of the week award if I missed something obvious.

Cheers

Today I went to fill an airgun and while the pressure was building according to the gauge on the compressor, the gauge on the gun was not moving at all! At 100BAR, I stopped the compressor and released pressure using the bottom bleed valve on the compressor.

I thin removed the GX Filter and just used a regular in-line filter and it filled the gun just fine., so it's not the gun, it's the filter!

I took the filter apart and everything looked fine, I tore down the top end, and it has a stack of belleville washers in the top of it that looks as if it must somehow regulate the output, but why would it be preventing air from exiting the filter?

Anyone else have this issue? Is this normal, and I just need to let it keep building pressure, or is something wrong?

Thanks...

Does anyone happen to know the typical thread pitch for the stop pins used in dovetail scope mounts ?

Karma SLS Standard 22cal with DonnFl RYU Quick Disconnect Moderator included (same as Yokozuna just a little smaller) Gun is in mint condition no defects of any kind. Shipped in original factory hard case. Scope and mount NOT included. I will not remove until gun sells as I still shoot it. Groups shown are at 42yds with 15.9gr Diablos. Asking $1395 plus $35 shipping

2 CONDORS (.177 & .25) + Extras These condors have some extra barrels and additional equipment that come with them. Paypal $1200

Rarely used, only had 100 shots of Altaros Turned Lead Slugs ATP 31gr slugs.
Extremely accurate and consistent performance, standard deviation is around 1.14.
Two 5-shot magazines, picatiny rail for bipod and all stock accessories and parts are included. Bipod is NOT included.
Asking for $1500 with free shipping CONUS only
No trade.
Feel free to call or text (925) 237-1203

EVANIX CLOUD ULTRA (.25) Semi Auto has 1 clip with this sell. This has an issue thou. there is an O-Ring Out by the Breach of the pellet so this thing is loud and blows air back at your face. Accuracy is great but the O-ring replacement I have not done. I only want to sell this to a person who knows how to replace the o-ring Breach on the pellet side. This is selling for $399.99 Pay Pal a steal for the right person.

I am looking for a link to purchase an Extreme big bore booster pump. Can anyone help me out!!?? I cannot seem to find one!!! Thanks in advance!

Have an Airmaks Katran long , 25 cal, this version has the 520mm CZ barrel along with a 480cc bottle. 1 mag, degassing tool, fill probe and couple extra o rings. Paperwork from Utah air. Now this gun was bought back in ‘21. Was shot 5-6 times first 6 months or so and was shelf queen since. Utah had it at 920 fps with 25.4g , I just shot it today with 34g doing 860 for about 52 FPE . I’m trying to upload video but Microsoft is giving me “the business “ , if I can’t, I’ll add photos later. PayPal F&F, $550 shipped in Airmaks case and boxed. CONUS ONLY, Thanks

Rain day nothing better to do i made up some air gun related memes . I'll post one a day till I'm out of ideas ( figure on 10 )

Here's the first meme



You can add your own if you like or able. ( Original your wording )

Air gun related is key here...

Finally able to get out to one of my dairy permissions. Lots of targets and lots of fun with the FX Maverick, the PARD night site and H&N Hunter pellets.
Hope you enjoy..

.22 600mm, factory stock (except for carbon fiber barrel sleeve and first reg delete. Well kept, filled with breathable dry air. Looking for $1600. Reason for selling...thinning the herd. I also might be putting an FX Boss up for sale? Just don't shoot it much. Honest buyers with good reps preferred. Local WPB even better.

Even though this is about pellet testing, I'm posting this in the Hunting Forum, because it involves pest shooting.

I think we can all agree that no matter what substitute media you use to test pellet performance, it's still just not the same as hitting rats, or chipmunks, etc. So I had the thought of using the chipmunks that I get, and propping them up in front of a pile of soft cloths, or something else that could capture a pellet after a pass through, without further damage to the pellet, so I can see what they actually do when hitting a pest. Maybe even using Play Doh to see how much deeper they would penetrate on a larger pest.

... or have I been watching too many zombie movies?

More testing/ Shooting full video to come.

Hello everyone, been gone for a while but I’m back now. Anyone know where I can find spare mags for a .177 akela? Sent out a few emails but nothing back yet, can’t find them anywhere. Out of stock pretty much everywhere or just not listed anymore. Any help would be awesome, thanks!

New in box, never mounted Hawke vantage 4-12x40AO scope $80 + split shipping.

For sale is my PBBA pro 20 and its gear. The pro 20 Has a 32” cylinder bore barrel, 14 reusable shells in a hard case, 2 bags of copper platted #5 shot, about 4k card wards, shot measure and shell loading tool, a rifled .457 round ball barrel, large box of round ball, sling, butt stock shell holder, soft case, ammo box for the loading stuff. It shoots BPI DGS well, at the ranges I was shooting round ball hit the same spot as the slugs. 450 fpe with slugs or 1 oz shot.


$1200 firm. Local pickup in Allegan county MI, or shipping without the shot, wads and soft case. Cash local, USPS money order or PayPal for shipping.

Entered just under the chin and poked through it's lower back. A good 5.5 inches of penetration on this tree rat. Used the crow Magnum pellets and he Fell right over dead. Pellet was just under the skin above its tail.

Hopefully 1:16 instead of the old choked 1:17.7

Good afternoon, went shooting today and notice that I have a regulator issue. When I start a slug testing session. I noticed that the second regulator will start falling off pressure when it's not tethered to a bottle. When the gun is tethered.
The regulator seems to work normal. When I get home and set the gun on my table. I notice that the regulator will creep past the original setting. Gun is in 22 caliber, SHOOTING THE NEW AIR MARKSMAN, 40 GRAIN PRECISION slug first regulator is wide open.
The second regulator setting 2600 PSI.
Any help would be greatly appreciated.
Sincerely, Rick.

Sold.

Fx keller gauge with angle bracket. $125 shipped usps priority with tracking number, paypal friends and family or you add the fees on top

What percentage of guys shooting airguns use them as their main form of hunting weapon?
I hunt ducks and geese with shotgun, pretty much everything else is some form of airgun.

Pulsar HP .177
13.43g Knockout @ 1009fps / 30ft lbs

Just finished testing out the 13.43g knockouts at different speeds @ 56yards when I spotted a moving target
80 yards away. Up 4MOA and let loose!!