700mm Sniper Slugger! Included is a 3D moderator, 2 Orion magazines ($65 value), 400cc bottle. 13 gram hammer weight and slug pin probe + power kit installed in rifle ($70 value). Has a stiffer Huma Air 56mm hammer spring ($15 value).

Currently tuned for 24.8 (.218) grain NSA slugs. Regulator is set at ~125 bar (more or less). Best 5 shot group at indoor 50 yard range shown below with washed and lubed NSA slugs.

Polished barrel with JB bore paste and Kroil.

All of this will be kept safe and secure and shipped in a padded UTG soft case.

Note: This rifle was initially a .30 cal; it has since been converted to a .22 cal. That is why you see the TalonTunes .30 cal grouping


No bipod included

Comes with a new 6-24x50 Mil-dot scope

Whole package for $1280 SHIPPED TYD
Or, no scope $1200 shipped TYD
Paypal or Zelle

Excellent shape all around. Vortek 12fpe spring and guides installed with Macarri piston seal. Smooth cocking and nice firing cycle. Have no idea of the velocity, just know it's much better than with the factory high power spring.

There are some light scratches at the muzzle where the muzzle weight goes past the threads and down over the barrel a couple of inches. They look way worse in the photo than in real life. And, the cocking handle/brake cover everything.

The gun does have a slight "bark" to the shot and a different muzzle device stops this but obviously doesnt do anything for the spring sounds.

Stock is in overall great shape. No digs, dents, scratches. Scope and rings are not included in the price, but if you're interested we can work something out. Its a mil dot Mueller APT with 30mm double strap BKL rings.

Asking $650 shipped in the CONUS. Or, if you want the beech stock the gun came with instead, it's $475. Paypal friends and family or add 4% to cover fees. Will also accept a USPS money order.

Email is tobinwebster at yahoo dot com

Try their new stuff!



I could tell you that Chuck @Longbrownbox went 14/14 on my field targets, but I’ll let him tell you what he thinks of the DRS 500

I have recently had an interest in obtaining a rear rest for my benchrest shooting. I checked around the different sites and vendors and found them kinda expensive for what they offered. I looked at what people posted and noticed a person using a little "car jack" type of device to elevate the rest. The name for this device is called a Lab Lift or Lab Jack. These are plentiful on Amazon or Alibaba and can be purchased for as low as 15 dollars(plus shipping)


This one is nice and simple, but it didn't have a way to lock the position in place. Friends in the forum pointed me to a lab jack that had a wheel with a retaining bolt. A little more expensive, but have better action and less play in the wheel..nice anodized finish..under 70 dollars.


Then, i wanted a way to track across a target so i needed something to move left and right. I thought i could use somethin like a Cross-vice, but they are much too big and heavy and only needed 1 axis. I stumbled on to a page that had linear tables on it, and i thought it would be perfect

Be careful about the height of these tables..if they are too tall it may prevent you from being able to use it for the disatances you need.
The one thing that i really didn't think about was how to attach them. I thought i was going to bolt them together, but the clearance for the heads(not recessed in the spots i wanted to use) is very low and the pre-made holes are a 1/4 inch off. So i am just going to bond them together with a metal epoxy like this.


Save yourself some cash and build your own
Mike

My shooting buddy bought a Vector scope form Optics Planet. Box came sealed and empty. He is getting a run around at this point. So he ordered another from Amazon. Scope came, empty box. They are telling him contact the mfg. Do with this information what you think prudent for you. I fill bad because I recommended Optics Planet to him as I have never had a problem excep the following. I will say I had a really bad experience with an OP sales rep once when I asked for a veterans discount. Either he hated the military or the fact I sounded Caucasian, he gave me the shuffle. I waited 25 min, called back to another salesperson and was handled in a good manner. I repoted the incident .

Alright guys, here’s the next setup that unfortunately have had no time to enjoy. The rifle as shown was purchased new from High Pressure Pneumatics, quality controlled/assured, Element Theos scope sighted, range tested and specifically tuned for NSA 20.2g slugs 11/11/2023. It has been laying dormant since taking delivery of the unit and only taken out for pictures to create this listing. All items shown are included. Here’s the line item list:

*** SOLD 4/11/2024 20:17 PDT ***

FX Panthera Hunter Compact 300 .22 with Nanuk 990 case
Kraford & Lypt Panthera Compact Arca Rail with two bridges
Element Theos 6-36x56 APR-2D MRAD
Eagle Vision Infinity IPS-34 2-Pc 34mm Adjustable Mount
DonnyFL Yokozuna
Accutac BR-4 G2 Arca Spec
Bagnall & Kirkwood PRS butt pad
Saber Tactical Panthera bag rider
AirMarksman Carbon Fiber 300cc bottle (factory included)
NSA 20.2g .22 cal slugs x 3 boxes

*** bonus ***
FX Outdoors True Ballistics Chronograph BNIB (will add pics tomorrow.)


Same as my previous listings, I would like to see this go to a fellow enthusiast! That said, here’s the airgun nation deal:

$4050 shipped UPS ground Insured lower 48. PayPal F&F or add fees G&S. Zelle is good too, local pickup in Los Angeles or Orange County.

Thanks guys!

-Ron

Hey guys, I received my Notos and am having a lot of fun with it. I have a question. If I fill the gun to 3500psi, turn the hammer spring screw all the way in and take 5 shots with 14.3gr Crosman Premier HP pellets I get an average of 770 fps. If I refill to 3500psi and take five more shots with the same pellets but turn the hammer spring screw out 1.75 turns from full in the avg is 761fps. If I do all the same again and turn out the hammer spring screw all the way out which is 3,5 turns the avg is 751fps. According to the manual the fps should drop way way more that I am getting when I turn the hammer spring screw out. What am I missing?

So I'm new to getting deeper into airguns, and I don't want to buy just-anything new. I want to be careful with my money, and only spend my budget on something USED when I can ... that way I could resell it if it doesn't work out, and not lose as much of my hobby budget.

I'd like to buy something pretty specific (a used PCP), but I'm having trouble finding the right resources.

Do you have any suggestions beyond what I've done so far?

• FB Marketplace and Craigslist are cooked ... posts are flagged quickly there and there's nothing there apart from $15 red ryders
• I've called the gun shops locally, asking if they know of any local shops who do secondhand air guns. Nothin doing.
• ... so I've taken the search online (the classifieds here, GTA classifieds, and AGW classifieds)
  • I monitor ebay casually, but there's not much action there

Are there secondhand markets that I'm missing? Everything I find online seems to be in the UK, where they are somehow much more enthusiast-supportive, especially with used AGs.

I'm open to suggestion. Thanks!

I'm going to say this a few time to be clear (The scope and scope mount are not included)
FX Impact M3 with extras and it needs a good home.
THE SCOPE AND SCOPE MOUNT ARE NOT INCLUDED UNLESS YOU WANT TO PAY FULL PRICE FOR THEM!!! Nothing special about them but I already have a plan for them and no need to take a loss on them and have to instantly rebuy. ALSO NOTE I am not interested in parting out the accessories so please don't ask that answer is a firm NO!!

I purchased the rifle from Pyramid air on August 3, 2023. I have made zero Adjustments to the settings. I was going to shoot up my old H@N pellets then switch it to the JSB's the tune it, but it shot them so good in the range I needed of 50 yards max I never needed to change anything. I have had zero issues with the rifle, and it has had zero leaks.

FX Impact M3 .25 Cal with everything it came with new $2099 (Bronze model costs more for some reason)
Extra Factory Mag (it only comes with one from factory) $69
Saber Tactical Full Arca 3 Swiss Rail $165
Saber Tactical Sling Quick Disconnect $20
Magpul MS4 QD sling $75 Other accessories and miscellaneous stuff $239
Total cost =$2667 so your cost is 75% which is the selling price of $2000

(except scope and scope mount) I will also be selling My air compressor and backup hand pump (which both are Air Venturi) later on after rifle is sold and I will be removing the Scope and scope mount once it is sold. If you are new to PCP airguns you do have to have your own way of charging them. I have some left-over pellets and other things that fit this airgun for sale at a later date so be sure to ask about them. More pictures upon request. Rifle is in 99% condition as new I did carry it in the woods last year so there may be a small scratch somewhere, but I haven't noticed it.

Not trying to hide anything with the pictures I was unaware that this site does not allow you to sell certain items and I did not know that when I was taking the pictures with one of those items on the rifle. So instead of retaking the pictures I left those pictures out for compliance. If you live within 500 miles of Stoneville N.C. I will deliver this rifle to you at a public location of your choosing and my schedule permitting. I am awaiting a back surgery so for the most part I am free to travel but that can change for me in a moment's notice. Otherwise, the cost of shipping will be the buyer's responsibility. I'm in the position of want to sell not have to sell so either it sells or it doesn't really matter to me. I just know I will not be using it anymore. This is the same rifle that I did the video with on you tube called FX Impact M3 0DB vs Ruger 10/22 Silencerco. (Hopefully I am allowed to say that)

More pictures upon request and of course the tripod isn't included either just to be clear

Alright guys, here’s the next setup that unfortunately have had no time to enjoy. The rifle as shown was purchased new from Airguns of Arizona, quality controlled/assured, Kahles K525i scope sighted and indoor range tested 11/3/2023. It has been laying dormant since taking delivery of the unit and only taken out for pictures to create this listing. All items shown are included. Will be shipping at least two packages: one for the Nanuk 990 containing full build and the other for empty factory Daystate case. Maybe a third for the empty Kahles box if I cannot pack with Daystate case. I will mount the PRS Buttplate prior to shipment, I didn’t have the Allen wrench when taking pics today.

*** edit SOLD 4/11/2024 14:03 PDT ***

Here’s the line item list:

- Daystate Alpha Wolf .22 Blue Laminate Special Edition 23in Barrel serial #002 with all factory included accessories and factory case.
- Kahles K525i 5-25x56i Scope with SKMR Reticle
- Eagle Vision Infinity IPS-34 2-Pc 34mm Adjustable Mount
- PRS Cheek Riser
- PRS Buttplate with Monopod
- PRS Picatinny Mount Bag Rider
- JSB Jumbo Monster redesigned 25.39g x 8 tins
- Nanuk 990 case

Same as my previous listings, I would like to see this go to a fellow enthusiast! That said, here’s the airgun nation deal:

$4050 shipped UPS ground Insured lower 48. PayPal F&F or add fees G&S. Zelle is good too, local pickup in Los Angeles or Orange County.

Thanks guys!

-Ron

Utah Airguns sent me this AirMaks Arms Krait Lite to test out!



I haven’t owned a .17 in forever, so I had to dig through my pellet stash to find something to shoot. I found some 8.4g, 10.3g & 13.4g.

Out of the box 10.3g @ 880fps, 13.4g @ 775fps. The Huma regulator is doing a great job with quite a few “duplicate” readings.

It’s got a little bark, so I added a DFL FatBoy with a .17 insert to help quiet it down while keeping it as short as possible. 29” with the butt stock extended about 3/4”.

I haven’t had a chance to test it yet, but I will!

Starting tomorrow at 4 pm CST!
Use code Invader150 at checkout!
View attachment INVADER.jpg

I have more pellets than i can ever shoot in my lifetime. And i have a wide assortment of sizes, brands. Luckily i've kept to two calibers, 177 and 22 or it could be worse.
But i just put in another order on something i've been wanting to try out. Cheap, expensive, it doesn't matter some have been a hit and some were not so good, price doesn't always mean better. At least in my little world.
I was a little miffed when i purchased the daisy hp a while back as they changed the design. I liked the old style, now they look like a cphp. Shoot well but not what i wanted. The search continues as the winchester brand shows the old style daisy on the tin. Did they change also, we'll find out soon.

Are they still being made? If so who has them in stock?

** SOLD **

Final price reduction $750 which includes free shipping within the continental United States. It will ship in its original foam-lined Huben shipping box. I won't go any lower on the price and will keep relisting this one until it sells.

For sale is a one-of-a-kind custom Huben K1 .25 pistol from Krazcool Airguns. It was made by shortening the stock, barrel and air cylinder on a regular Huben K1 carbine. The resulting 17-shot semiautomatic .25 cal pistol is fully regulated and has the same action and adjustable power typical for the Huben K1 carbine from which it was made.

I've included a picture of the underside of the pistol so you can see how Krazcool set up the reg and power adjustments. He removed the original power wheel from the underside of the gun and made 2 small access holes through the base of the stock for adjustments to the regulator and power adjustment using an Allen wrench. This was a prototype and not intended as a commercial product. It was not set up to use a scope, though if you are comfortable working on your airguns it looks like a small mounting rail could be added to the barrel bracket in place of the current fixed sight.

Here's a link to a short YouTube video demoing the pistol: https://www.youtube.com/shorts/bNvNuBWC03M

The shipping box includes a Huben fill probe and a bag of mixed O-rings and seals.

I shot a couple of magazines of pellets when I got it. It cycles and functions like the other Huben K1s I've owned.
With 33.95gr pellets and the regulator set at 200Bar:
5 turns on the power adjustment 861fps/55.9fpe
10 turns on the power adjustment 871fps/57.2fpe

It could be set for higher power, or power can also be turned down very low for indoor short-range targets.

The 2nd picture below compares the size of the custom K1 pistol to a standard K1 carbine.

After this sale, my airgun storage room will finally be empty.

Thanks for looking!

Jpiperson2002

Cleaning out the safe and this one needs a new home. I bought this one from a fellow AGN member to be used as a truck gun. I don’t shoot it much anymore. It definitely has some scratches and is missing the rubber cover over the safety but still shoots great. I slipped an oring behind the tophat to bring the power down a bit. - SOLD pending payment

Includes:
12” .22 caliber barrel
12” .25 caliber barrel
Airforce bipod
Tank fill adapter
Airforce talonp
Donny FL adapter

$300 shipped CONUS PayPal FF preferred.

Alas, there are rats in the dilapidated old chicken barn that came with the property. Spotted one last night, but wasn’t ready for the shot. This evening I sat on my back deck and waited. I did not record the shot as I was way more interested in “making” the shot. It was facing me at the shot it measured at 13”.. The scope at 20x using the PIP mode, sending CPHPs. Going forward will be setting up bait stations and will be punishing them. Another example of why I love my wicked Atomic XRs… They simply perform for me when it counts. The red light shot is the kill site, the second image on my dirty back deck.

As suggested to me in another post, Hawke scopes are pretty good for the money. It will go on a pcp rifle...Air Venturi Avenger either 22 or 177. Which would you choose for yourself? Is there a better scope out there for under $200?

Need advice on a 54 and where to get the parts. Need a spring and seal kit. Not looking for anything radical. This is all new to me. Appreciate any help. Tia,Todd.

I have a FX maverick and have purchared Orion Iguana Hunter 3d printed magazines. Those work fine.

I just found these on Amazon. https://www.amazon.com/Maverick-Cro...1712765834&sprefix=,aps,121&sr=8-7&th=1&psc=1

The 3D printing looks a little rougher that the Orion mags. But they are 2 mags for 35.00 shipping included.

Has anyone used these? New seller as of April 5 2024 TqEquipments in Washington State. I also see QD Fox printed on the magazines.

I had to put a flashligh on my front sight to get it done, but the old guy still has it. Lol "both of us"

We grew old together.

I raised up the rear sight almost a 16th of an inch, using 8 strokes. JSB 13.73s.
I have been wanting to this but I decided not to put the older Streaks (65 & 55) up to this pressure, as they are original.

Hi, everyone:
We just wanted to wish everybody safe travels as you are making the journey to bayou country. Our club members have been working hard to make this a great weekend for all. The courses are looking great and the weather is as well, so bring your "A" game!
If you haven't already paid please bring exact cash or a check. Jennifer Wylie, who handles all of CSC's admin chores will not be able to attend this year so please bear with us. Also, we will have an exceptional amount of raffle items that need good homes, so plan accordingly!
Looking forward to seeing everyone! Laissez les Bon Temps Rouler!
-Griff

I have a Helos BTR Gen 2 6-24x56 MOA FFP. With XLR high pic rings.This is a great scope with great tracking. Just selling to get something with a little more magnification.Does NOT come with sun shade or bubble level. I am asking $410 shipped to your door. PayPal F&F preferred or add the 3%

Make sure to grab up one of the remaining tables for the Midwest Airgun show being held on June 1, 2024 in Columbus Ohio. Well known for being one of the largest and most diverse Airgun shows around with 100+ tables of both new and used airguns.

www.midwestairgunshow.com

MidWest Airgun Show 2022 | Airgun Advisor |

5/7 mph wind r to l. Jsb 13.7 @ 705 fpe. Bear get to live another day.