For the Notos lovers.

SOLD.



Selling my Notos .22 that is detuned for barn pesting shooting CPHP pellets @585 FPS. It shoots other pellets well too just see the target below. I installed an external plenum which doubled the shot count from 21 to 40 shots before it’s off the reg. Barrel was send to Firewalker, our resident Notos expert for polishing and a new crown. I removed the stpock OEM moderator and installed a 1/2 - 20 adapter so you can add your own device. It also comes with two Maple Products 15 round hi cap mags as the OEM mag is junk and I threw it away. The Maple’s operate flawlessly. Also included is a picatinny rail to mount a bipod to.

$350 shipped in the lower 48. PayPal is OK but add 3.5% to cover fees. I’ll also accept a postal MO too if that works better?

I have 100% positive feedback here so buy with confidence.

I have 3 nice pistols for sale -
Artemis PP700SA .22 Tuned by Brian @ Verdium Air. Huma Regulator installed. Easy load loading gate, 3-D print effective LDC & bi-pod adapter, foldable rear stock, UTG 3-12X44 Mini swat scope. Asking $425 shipped.

* SOLD BOTH* Selling 2 HW44 Pistols. One in .177 & .22 cal.,
.177 includes 2 magazines & fill probe.
.22 includes 4 magazines & fill probe.
Asking $725 shipped for each.
* NOTE- Scope and rings are not included on HW44.
No issues with any of these pistols, hold air and function as they should.
Accept PayPal friends and family or USPS m.o or personal check but must wait for bank to clear it.

Just want to get some thoughts on this match up, a FX Panthera Hunter Compact VS BRK Ghost Carbine both in 22 cal.
Lets say they would be used mainly for pellets and max distance of 100 yards (I know its 100 yards is tough but its just a reference number).

What are your thoughts on this match up?

NLA

Daystate .25 Wolverine HP R in a gorgeous Minnelli Forrest laminate stock. Condition used, but to me better than new. There may always be a cosmetic something on anything put into service. This airgun is clean as it gets.

$1500.00 shipped to your door = insured and signature required. The Scope is not included.

Tuned by Derrick Wall for Extreme Field Target - shooting JSB 33.95 gr @ 890 FPS >50 FPE

history:

Highly recommend reading this thread about this gun = Purchased new from Tenacious Airguns Fall of 2023 for $1800.00 plus adds - see this link for my acquisition: https://www.airgunnation.com/threads/25-wolverine.1300804/

I shot one EFT match with it in Orlando Florida area in November of 2023 and it has otherwise sat unused - too much airgun for my backyard.

PRS OR CARM SINGLE SHOT LOADER included
3D bottle clamp included
Donny FL Moderator with QD system included
Custom Minellli Butt / shoulder piece included - i have the original rubber shoulder butt piece if you prefer.
I have lots and lots of positive feedback so buy with confidence
Paypal FF: [email protected]
Zelle
Venmo
checks or money orders must completely clear (14 days sometimes) before i will box and ship.
Send me a text for more photos or info: 251-610-8582

If you have a super clean and very new Wolverine HP R in .177 i will consider a trade.

For an impressive tie-breaking win on the Big Bore Slug Challenge at RMAC 2024!

For his back, to back, to back, to back (4x) 100 yard BR victories. Shown here at RMAC 2024

Saw this deal and it was good enough to buy. The price for the vise alone was comparable to a couple of other vendors, but I can always use more tools. Anyone use one of these? If so how do you rate the value for the price point?

Winner of the 2024 RMAC PMC Pro. The targets were challenging, and the heat was almost unbearable, but Matt pulled it off in humble fashion.




Check out the Best of the Best PMC Compilation:

I'm wanting to sell most of my airgun collection starting with this beautiful Weihrauch HW50S in .177 cal. I purchased this gun in 2022 from Krale and it's essentially new. There are no marks on the wood and no rust. It never got much range time at all. Comes with the box and all papers. $295 + $20 for shipping. The Hawke Vantage 2-7x32 mil dot scope, also like new with one piece mount, is an additional $75 if you want it.

For FX IMPACT. Don’t need it. $115 shipped. No probe or magazine. It’s for .25 cal. Has 600mm ST liner (built for pellets). JSB KO slugs have potential in these barrels as proven by Ted.

I found some new accessories for our favorite air rifles on Facebook.


And they have more

I inadvertently put AOA in when I meant to put Utah my apologies. My tablet is so slow and junky anymore I can't get in there and edit it

Hello folks. I've been lurking around the forums for a couple of weeks now.
I live in Los Angeles in a semi rural area. I know all my neighbors and they're pretty much fine with noises and what not.

However, I'd like to keep it as civil as possible.

We've had a big problem with coyotes lately. They've taken out a few barn cats that were strays and folks took them in. I'm seriously afraid about our pets in our property. I've managed to keep them out of harms way by setting sensors all over the property but I'm tired of waking up at 4 in the morning to chase 5 to 6 coyotes out.

Anyhow, I am a complete newbie to airguns. I have rifles but alas, I live in Los Angeles. I can't just discharge a firearm in my yard without running into problems. An airgun will have to do.

After reading around the forums, I think a .357 Benjamin Bulldog will do the job. I noticed there's a .457 up for sale on the classified sections.
My question is, will a .457 do?
Would it be way too loud?
Any way of suppressing noise?
What kind of scope would you recommend?
Air compressor recommendations?
What kind of cartridges do you recommend?

All the questions! Also, if there's another rifle that you'd suggest, please send it my way. I don't mind buying something used to save a few bucks as well.

Edit: Also considering a Texan since the seem to be quieter.

Hey all, I’m curious to see if anyone has tried these yet? I just received these with the matching barrel, and was looking for a starting point. My tune for 34g pellets produces 820 fps, but I know slugs like speed. HP Reg is presently @ 1400. Skout Epoch with new 34.4” slug barrel

WTS FX Crown MKI .25 Cal 600mm. $1200 Looking for Panthera or Dynamic .35 Cal

WTS FX DreamTac .25 Cal, 380mm barrel, 480cc CF Bottle, Power Plenum, 2 FX mags/2 STUD mags/speedloader kit. $1450. Looking for Panthera or Dynamic .35 Cal.

WTS FX DreamTac .22 Cal, 320mm Barrel, 300cc CF Bottle, DonnyFL Ronin Moderator, Power Plenum, 2 mags. $1250. Looking for Panthera or Dynamic .35 Cal.

This is a nice Brocock Atomic. The Airgun is in very good condition with only minor marks. Holds air like it should and has no issues. Includes fill probe and one factory magazine. $975.00 shipped to the lower 48 only. Prefer PayPal for payment. Not interested in trades.

Hi All,

Bought a couple of these older smooth twist .22 Royales lately and time to move this one along.

Beautiful wood stock, Huma regulated, 2 magazines, DonnyFL adapter original steel bottle.

Reg set to about 125 bar shooting 18.13 at 840 and Hades around 880 and is a laser. Only reason for selling is to move along some of my duplicates.

Pics available on request and thinking 625 shipped would be a good deal for someone.

I have this wonderful Midas Tac 6-24x50 FFP APRS3 Mil. Does not come with accessories or rings. It’s a great scope with zero issues. Just needing more magnification. I’m asking $400 shipped.

PayPal F&F preferred or pay the fee.

Hello fellow sportsmen and women, I will be sharing my collection. This is a Talonp with a 18" airforce heavy barrel. Also is a donnyfl barrel adapter with a brocock stripper and talontunes quad rail.

Maverick 25. Need items 58,59,60,61,62,&63.
This is valve and seat assy, w, seals
Utah is not dependable. To slow or.no show on emails. Maybe I could call them if you suggest!
Looking for dependable alternatives. In stock Parts, not barrels and bottles. PARTS to repair these Edsel.

Here is an up close look at the Reximex Throne Gen 2 Compact model, for sale now in the USA at Pyramyd Air. Great PCP! This is my new favorite compact shooter. Thanks for watching! -Nate

Well, I was hoping to get at least 2 days of shooting in with the Avenger. But.....

This Morning I took it out to see what speeds I get with higher Reg Pressure and I saw what I wanted to see with My Heavier weight projectiles. So I brought it back in and de-gassed again to put the pressure lower like it was before. So I fill it to 4000 and sit down to adjust the Reg again. I did and all of the air started leaking as soon as I opened the Valve Screw. I then let the rest of the Air out again and closed the Valve screw again. So I refilled it again, up to 4000 again. I let it sit for a while and all of the Pressure stayed. So I thought let's try opening the Valve screw again. Sure enough, it started leaking air again. I released the rest of the air, and called it quits. LOL The Airacuda had a full charge, so I went and shot that! lol I did not plan on working on a Rifle on the second day.

Any thoughts? I have never disassembled one of these things and am a Little Nervous.
Thanks!