SOLD to kzz1kaw

Up for sale is a CZ Slavia 634 in .177 and synthetic stock.

I bought the rifle new and it is in excellent condition. It only has around 20 - 30 pellets through it.

I am looking to get $150 plus shipping, insurance and signature. Payment will be via Paypal only. If you elect to pay via goods and services please add the fees too. I can also accept Zelle and USPS money order. Selling to continental U.S. only. I will entertain reasonable offers. Low ball offers will be ignored.

Thank you,

Taso

I have a like new 18” It shoots 18.1@950 like a laser. So I wanted to shoot slugs and I had a 700mm LW poly barrel kit for an Epic Two so I threaded the epic barrel for the evol receiver nut and now it’s a slug shooter. I installed a Huma reg ,as not wanted to adjust the factory reg,and set the huma reg at 150. Wow it loves the 40gr atp at 880-900 and with same settings shot 27 gr 217 H&N vers 2 slugs moa at 100 at 1050 fps. It’s a nice set up able to go back to factory setup. Comes with the 18” factory barrel,700 epic barrel,evol barrel wrench,barrel tension nut tool,2 factory mags, 1 carm mag,carm ss tray,factory reg at factory setting, huma reg at 150 and the nice heavy green zipper carry bag. We can talk about the setup if you like. Thank you. Mark. $2350 shipped

As I clear out my vault, the next one being offered is a beautiful RAW HM1000X-LRT in .25. This rifle is about five years (Pre Airfiorce) old but has never been carried outdoors - only shot of the benches in my indoor and outdoor ranges. It has a very few handling marks but none anyone would notice if they weren't looking for them.

It came back within the last couple of months from Martin Rutherford at Airguns USA as I sent it to him to go completely through it, re-seal it, and adjust the trigger. It is tremendously accurate with the 33.95 Gr series pellets.

The rifle will come with three RAW magazines and a Carm single shot loader.

For the rifle only, price reduced to $1,175 via PayPal F&F or Zelle, shipped to within the continental US.

For the currently mounted Hawke 8-40x60 SF30 ED Sidewinder scope and FX no limit mounts, add $500. For the Accu-Tac bipod shown, add $250.

The scope is perfectly calibrated to the trajectory table shown on the bottle - and no tuning or doping work should be required if purchased together.

The current time stats show a high velocity of 886, low of 876, with an average of 882, an ES of 10, and an sd of 2.3, yielding 58.65 fpe. I have tried higher velocities but this time provided extremely tight groups our to 100 yards.

So I'm building a small unused room (about 10x15) in my house out for my growing air rifle addiction and I'm wondering if anyone has suggestions on killer features that you like or would have liked to build in to yours. So far I have storewall (slatwall) on one end of it for rifle display/storage, some hex led lights for lighting and a sit-stand desk I'm using as a workbench.

I'm learning PCP airguns Purchased a FX impact 25 cal. Looking to get together with people shooting on my 100 yd home range. I just built.

Super nice Caiman X. No issues. Only selling to free up funds. Has the weevil regulator fix (https://www.airgunnation.com/threads/airmaks-caiman-a-definitive-regulator-fix.1288005/) and the reg is steady from 300 bar down to 110 bar. Very accurate with a variety of pellets.

Comes with 3 mags, fill probe, a 1/2-20 moderator adapter, a picatinny bipod adapter, manual and the original soft case (which has a small cut). $875 shipped CONUS. Local pickup available in Central Ohio.

I often see refurbished items on retailer inventories, how exactly are these things refurbished? Do they get sent to a manufacturer's repair facility? Sometimes I wonder if refurbished just means cleaned up and put in a new pretty box. For those of you who have experience, what do you prefer, refurbished items or used? Which one has given you the best bang for the buck? What is a reliable source for used airguns/accessories and/or refurbished?

Next up is my beautiful Epoch 25 with 35" barrel - though purchased new in 2023, Darryl Trent and the Skout team insisted on bringing it back in last month.

The Skout Team went completely through the rifle, and tested it at 100 yards for max performance (though I am certain it has had less than a tin of pellets through out). The moderator upgrades, barrel stiffener, firmware, and every aspect of the rifle were all incorporated and/or brought up to the standards of the current production rifles.

This rifle shoots prefers the JSB King Heavy MKII 33.95 grain pellets. As you can see by the accompanying target, it will stack the pellets. Its current tune produced chrono stats across a 40 shot string of 948 H, 935 Lo, with an average of 935, an ES of 8, and an SD of 2.4. This string averaged 66.9 FPE.

The rifle has absolutely no handling marks on it. It will be shipped in the hard case as was sent by Bin at the Pellet Shop originally (less T-shirt and candy). I will include the UTG over the rail bipod. All of the original owner's material, the other two barrel liners (SKOUT has advised that I will never use them), tools, etc as furnished with the rifle will be included. The rifle will be degassed prior to shipping.

Price is reduced to $1750 shipped within the Continental US. PayPal F&F.

Optics and mounts not included.

Excellent idea on a lower cost gun.

The gauge can be set...on either side.


Yeah, yeah, someone...will hate it !!

Mike

na

After watching the classified section for a month or so waiting for one of two particular rifles for sale from a member of good repute I'm out of patience and am about to click on my waiting cart from an online retailer.
Based on prior timing anyone out there looking for a compact .22 just wait another couple of days, they'll be showing up by the boatload after I pay full retail price.

Its a Benjamin 3100 bb. I never seen one this pristine "It actually pretty accurate. "The guy was cleaning out this house where the old guy died and it was wrapped in a bunch of old rags

I have Hoppes cleaning supplies for My "Powder Burners, Will they harm the O Rings in My new Air Rifle? I figured I had better ask the Knowledgeable! What say you? In My area selection on anything "Air Rifle" is almost non-existent.

So I've been shooting alot of long range. 100+ yards as I want to shoot the Northeast Airgun classic next year as it only a hour from me and I have to say I'm a swell shot . But when I go out I lay prone so I can have my chrono infront of my rifle to record the data in the current weather conditions I am shooting in. But I want a bench. Something portable that will fit my rifle and chrono. The caldwell foldable benches look small. Are there other options? what u all using?

Selling all my slugs. Just over 3,000 slugs.
$150 shipped. PayPal F&F
Unopened box:
H&N .217 34gn
.218 36gn
.218 40gn

Zan .218 36gn
.218 40gn

Javelin .218 40gn Gen2
.218 34gn Gen 2
.217 40gn Gen 2

Opened boxes:
H&N .217 34gn full
.217 34gn 133pcs
.217 36gn 129pcs
.218 40gn 105pcs
.218 36gn 102pcs
.218 34gn 54pcs

Zan .218 40gn 109pcs
.218 36gn 129pcs
.217 40gn 177pcs

Javelin .218 40gn 166pcs Gen2
.218 34gn 111pcs Gen2
.217 40gn 132 pcs Gen2
.217 34gn 68pcs Gen1
.217 30gn 53pcs Gen1

I have too many .30 cal and moving on to different project to buy, build or trade.
For Sale Talon P .30 cal, 24" TJ 1/26 twist barrel, Talon Tunes .30 cal aluminum breech and matching 1 piece Hi-flow top hat, matching ported hi-flow valve for .30 cal, 115 gram heavy hammer, heavy hammer spring, talon p tank adapter to 500cc tank, super sear 2 trigger and reduced weight trigger springs, auto safety converted to manual, maddog stock. Custom shroud, vented barrel bushings and threaded m18x1 for your standard big bore moderator.
Tuned at lowest power setting, 2800 to 2200 psi, 12 shots per fill, 54grn slugs at 950fps, nice tight spread over curve. Same tune with lighter 47.2 slugs at 980 fps. Will include box of nsa 47.2 grn and tin of h&n 50 grn slugs. Tj barrel shoots slugs and pellet with very good accuracy

Asking $600 shipped
Scope and bipod not included
May consider tades

I bought a preowned Panthera 600 in .22, front and rear bottles. Came to me with a left-handed cheek piece and left hand charger lever. That was not good and I won't mention the name of the well-known seller. So it was easy to change the cheek piece, and I watched a bunch of videos on how to change it from right hand it to left-handed, and I thought I folded correctly but after the charging handle was reinstalled, the bolt would only move 3/8 of an inch or so to the rear and seemed like it was hitting some sort of stop. So it's unusable can somebody help me with this please?

Hi 'yall,

I'm hunting upland game with an air shotgun that gets 3 shots per fill. I'll try to shoot until the chuckers and grouse vacate the area.

Question for the group: who is making the most field and back of the truck ready sleeve/armor case/padded case for a buddy bottle in the 68 to 150 ish cubic inch volume range? I would like to sling this kit over one shoulder like a possibles bag and short starter are used for muzzle loaders. A pouch to hold refillable air shot shells would be nice but not required.

I'm interested in portable, ergonomic convenience that protects my tank and keeps it at my elbow while hunting.

Suggestions?

Mike

https://www.rxtargetsystems.com/shop/rxduelingtree to order here!The Rx Dueling Tree 6.0 made its debut on the national stage at The Northeast Airgun Classic featuring its simple set up and shoot design. It is offered in two options currently permitting 22 through 30 caliber Airguns. The design has been enhanced over the original model reducing paddle blowback and allowing for 6 paddles on the tree instead of 4. If you are interested in having these on your tournament field or club event, contact me, Dave Bitkowski, as soon as possible. A big thank you to Northeast Airguns Classic for choosing Rx Target Systems to be part of the speed round.

Alright I think I found the source of my bolt binding during use. It was unreasonably difficult to cock, sometimes it would even fail to pull the hammer all the way back to its “catch point” ’m not certain if this is the correct factory bolt but the Allen head that “catches” the hammer had a knurled head. I looked at how the assembly works and realized the knurling on the bolt was digging into the aluminum track it rides on. It would bind worse the further back it went from side play I suppose.

A short ride for the bolt in a cordless drill with a flat file to dress it up and it’s smooth and no more binding.

Either the choice of bolt used was incorrect from the factory or someone replaced it along the way with the wrong kind are my best guesses.

Hope this helps someone in the future. I’d polish the internals, but it’s getting a side lever soon so the kids can shoot it off the bench more easily.

Got myself a new Zoraki Ultra (.22) yesterday.

Interesting gun. I normally don't care for the "Star Wars" looking plastic guns, but I've been curious about it so...

Interesting looking. Had to remove the grips, palm rest to make room for my hand. It came to me in its lowest position, still not enough room for it to feel even close to being comfortable.
I oiled everything. Did a "little" bit of trigger adjustment after firing a few shots. It really didn't need much, After the trigger hit's the "wall", it's a much more...crisp let-off than I figured it would be. Only thing is the trigger and its other parts are "tight" in the frame. Maybe after about 1000 rounds, it might loosen a bit !
I put a very small Burris 3, red dot sight (yes, a reflex sight) on it. The sight's been sitting on the shelf for years, so I thought I'd give it another try. Actually had to modify the adapter Picatinny/Weaver mount to fit the shape of the top rail of the gun.
Even though it's a $290 gun, (not a $50 P17) it's still more accurate, easy to shoot than I figured it might be. Actually surprising how easy and accurate it's shooting...off-hand (as I do all of my guns), especially in my old hands.
From across the living room, it looks a bit like the Beeman, P3 / P17. I sorta put it in the same class before I bought the one that I have. But even though it's a plastic gun, (NOT...ballistic plastic as some think), and similar in looks, it's quite a different gun.
So far, have only used the "two" pump speed. No need for anything higher, in my case. Shooting only about 10 yrds. at little dots. As I said earlier, it's very easy to shoot accurately.

So far...glad I bought it.

Mike

I'm kicking around getting one of these as everyone seems to love them. Previous day/night scopes always have seemed mixed reviews but this one is different. I can definitely see me using this on the dairy as we do have some rats and we get mice at our house. I also think I can find roosting birds at night. Anyways is the LRF worth it for someone who doesn't really use a rangefinder all that much for normal shooting? Most my shooting is either from memory or just simply doing it long enough I have a pretty good guess on the distance. $240 difference is pretty big IMO but I can see why some use it. What do you owners of these think?

Does it matter what pressure I set the tethered pressure at on my RAW HM1000x? I am guessing the bottle reg is set to 140-150 bar on my .25 cal so can I set any pressure above that or will there be a tuning difference with different pressures? The way I am looking at it is the tethered tank is basically just extending the tank on the rifle so as long as the pressure is above the reg pressure on the rifle there should be no difference.

I have two crosman 400 repeaters. I put seals in both of them and every thing seems to be functional. No magazine for either. I bought a piercing cap but only have one. The other has some type of fill cap? I’m asking $220 shipped. The rifles are not in perfect condition. Text 419-905-5119

Hey guys. This is a brand new PCP air rifle from Umarex. It's under $200! It uses 3600 PSI canisters of compressed Nitrogen, which is not susceptible to temperature changes like Co2. This Umarex Komplete NCR is also regulated. It provided around 50 full power 1000 FPS shots! (900 fps in .22). Great little gun. Just don't pick it up by the foregrip! Thanks for watching! -Nate