Just order a Benjamin Marauder in .22 with the upgraded barrel, 10 for 10 and a cheap hand pump.

In my search for a decent pellet rifle I actually bought and still have a Hatsan break barrel but I never liked it and will soon be selling it.
I've seriously considered a pump built into the rifle type of set up but decided against it.
From there I was seriously considering a Chinese made pcp.
At the last second I changed to a Benjamin Marauder in 22 caliber. I added the Lothar barrel.
Although I have a compressor (I haven't set it up yet) I ordered a cheap hand pump for now.
Not a fan of the UPS shipping from PA but it is what it is. They don't like to come down my road and apparently there is nothing that can be done about it.
So once it gets here, I'm looking to go over the rifle and give it a cleaning.

Trying to perfect a tune.
I've been pesting every week heavily and accuracy is outstanding. I've said it in other posts and I'll say it again for the sake of relevance to post.

Shooting a Dreamline Tac 25/600 w 290cc Tube. I'm currently set at 108bar on the reg, 17 on the wheel, about 1.75 turns on the HST internal screw. Getting 857-863 with an EXTREME spread of 12. But mainly between 855-862. I notice when I rechrono to confirm same tune my first shot Will be slightly low (847-850) then back to.the sweet spot for the rest of the mag. Then I'll get a few 837-841-829- then back to 860 for a few. I know if velocity drops after first shots it's too little HST but.. its so consistent and always goes back to the sweet spot. Does anyone have any ideas?

I'm getting Altoids/Dimes at 50- quarters at 100. I'm using the same exact pellets... I'm an over perfectionist and hand weigh the pellets to the .001, inspect all skirts, and place the best 100 out of every can skirt down in empty FX Hybrid Slug blocks to protect them. It's not weight variance or gas bypass from deformed pellets.

Webley Tracker Deluxe spring air rifle in .22 cal for sale. The Deluxe model has a walnut stock with slight swivels, muzzel brake, and Webley rear sight plate. This rifle is in very nice shape with some wear from use including light dents on the stock, and some oxidation on the compression tube. Functions as intended and shoots well. Asking $500 shipped.

na

The GX CS4-I are back in stock on the GX site.

Completed pulling the targets from my course this morning. Going to donate them to two retired friends who are wanting to build a long range air gun course and to a young father and son who are just getting started with airguns.

Most of these I made and they have served very well over now several years, taking tens of thousands of hits

I’m new here and I’m lost in this pcp world of guns and would really appreciate your help. I need a gun for my son’s bday with the following characteristics.

- pcp
- semi auto
- less than 7 lbs
- must be quiet for backyard shooting
- my son is small, so a smaller gun would be better but it doesn’t have to be a pistol
- reliable
- I was hoping for a $500 budget but it may have to be $800?

I ordered the hatsan sortie but I cancelled bc I was afraid it would be too loud. We have a Benjamin marauder and we love it but it’s not a semi auto and it’s really heavy. He’d like something he could walk around with and shoot. And if you have an idea but it’s too expensive, let me know anyway. I may have to increase my budget. I’d really appreciate your advice! My son thinks the sortie is on the way and I haven’t told him I cancelled it yet! I need to find something. Anything I can do to help keep my kids outside and off screens is greatly appreciated.

On this Splatterburst target. There was still some meat on the bone but four weeks out doors takes a toll.

I have a PCP for pesting (think 30 yds, at most) and want to get more accurate than a red-dot allows. So I am shopping LPVO type scopes.

Pretty flexible on things like FFP/SFP (finding 90% of them to be SFP, parallax at 100yds), reticle (doesn't matter much to me)

Primary concern is close-focus ability, since this will be for a <30yds application. I realize that zeroing will dial things in, but don't want to make a purchase mistake if I can avoid it.

Are there any tips/recommendations, if I want good focus at close range? As in, no blurry image at 10yds or so.

was trying to fill air yesterday, & it LEAKING really bad around the fill probe , was not successful in fu;lly airing up , i can not see any damage to o rings on the probe, the gk1 does not have 500 shots thru it yet..

WTS- Kral Puncher Jumbo in like new condition. 5.5mm.
No marks to be found on the rifle
Less than 100 shots fired

Comes with:

2 x Magazine,s
Singel load tray
Bipod
Hardcase
Scope mount
West Hunter scope 4-16x50FFP
420cc bottel

$ 565 shipped

A brand new Rekord Match trigger assembly, purchased from Mundilar as a spare for my Weihrauch springer collection.

Never installed or used.

Price reduced to $75 shipped within the continental US. PayPal F & F.

If I pull out one of my non bottle guns , Mutant,Veteran,Vulcan, oops not the Vulcan 177 it gets 100 shots per fill,
And I want to shoot 30 to 60 times , I put a valve on my little tank and it works for one fill, Maybe a little more had not tried seconds with it.
Alway thinking of the easy way, LOL.

Today I was shooting my new Wildcat MkIII bt vp and had what seems to be some sort of major malfunction. I was casually shooting some different types of ammo to see which one my gun likes the best. I have maybe 300 rounds through it total since I got it last week. Today I got about 100 rounds through it, then refilled to try out the FX 50 gr diabolo pellets. I shot about 9 through it. They were grouping very nicely at 50 yards. Then I chambered a new pellet, aimed at my target, and fired. The round flew high and right about 5 inches from the previous group and the shot made a slightly different sound than usual. I also felt a small puff of air on my cheek. When I went to cock the gun again, the charging lever will neither come back fully, nor go forward fully, and the mag seems to be jammed in the gun. I have not touched it since, as I don't want to do anything that would void the warranty. I will also note that I have never fooled with either of the regulators, as I just got it and was trying to find the best ammo for it before I toyed with any tuning. Does anyone have any idea what may be going on here???

Both of these are OD Green

Planned on using on my FX Dynamic Express but changed my mind

$130 for both!!

Magpul MAG1159-ODG

Ergo 4045-(B)-OD

Not really sure what I'm doing but I'm going to put up my Evol Mini for sale. Definitely used has some marks in various places. Not abused though. I'm the second owner. Derrick Wall owned it first and won a competition with it before selling it. I've now owned for 2 years. Shoots very good. Tuned at I believe 870fps with JTS 18gr. Tons of every oring if you'd ever need them. 1 OEM mag and 1 CARM mag. With that I'd like $1575 OBO. Shipped CONUS.

Wanted to try out so ordered from Amazon. 2-250 blister packs $23 delivered. At least easy returns if mushed...

Basically I sold all my PCPs, I still have 2 physically in the house but they are sold, I will enjoy them until I have to ship them.

I've always wanted a quality Traditional gun but never had the drive to get one, I have a Gamo Hunter sport .177 that I like a lot and also have a Titan .177 that I also like.

Thinking eventually to get a quality gun, I'm leaning into the .22 cal and I definitely prefer Pistons rather then springs,

Diana used to make a few piston guns but I don't see them anymore, the HW90 and the Beeman counterpart have always intrigued me.

What shall I do ?

The lights out we always hope for. 34 grain pellet on the noggin after Digging holds like crazy under my buildings. And caught him at about 15 yards .

Looking for one of these. Let me know what you have.

For a Skout epoch or a Karma red panda , which would you go for and why ?


Thanks .

There is a vitals thread, how about a head shot one?

Share the particulars and a photo or video.

Took this one today.
Crosman 2240 XL with a 10” barrel
Hawke Vantage 4x AO
Crosman 14.3 dome @480 fps 7.32 fpe
Buckrail moderator
18 yards
In and no exit.
This is usually used as a small lizard gun

I love this little Notos. I am making some aftermarket hand guards and accessories for the Umarex Notos. Its a great little compact gun but for me its missing Mlok and picattiny rails to attach a flashlight and other accessories.

If you have any ideas on what you make next please leave a comment. Lets see what mods you have done to your NOTOS.
www.bravo3d.com

7 tins of .177 JSB 13.4 redesigned all unopened, and a sample pack of GRIFFIN.22 slugs. That’s $11 dollars a tin for pellets! Threw in slugs for $12. $89.00 total. Conus, PayPal Split shipping “you know how heavy they are”

Just got my .22 cal Brocock Compatto Sniper XR from AoA Wednesday. I didn't know anything about Brocock except it is a sister company to Daystate and as of late they may be sharing some technology. So, I took a chance on the Compatto and so far I'm happy with it. I wanted a rifle that was short, lightweight, accurate, synthetic stock and had adjustable power (hammer spring). It checks all the boxes. I have it set up currently shooting JSB 18.13s at 805fps on mid power for about 25fpe. Once sighted in, I shot this 11 shot group at 40 yards:

It seems to just as accurate as the Daystate Huntsman Revere which is a nice surprise! My question is, does anyone on this site have any data such as speed and accuracy for different pellets at different power levels with this rifle? I tried the JSB 15.89 and 13.43s at different power levels and they were not as accurate as the 18.13s.