Looking for AGT Vulcan 1 magazine .177 also looking for 3D printed in stock magazine holder for Vulcan 1

If you guys want to have some fun, shoot bottle caps, cards, chalk, airsoft BBs, etc…

Practice a lot, maintain a good rifle hold and develop your muscle memory.

Speed shooting is one of my ways for practicing but lately my carpal tunnel syndrome has worsened so I’m stuck to benchrest shooting WRABF/ERABSF BR25 and BR50 meters.

I tried some bottle caps yesterday and I’m not that fast as I used to…

Some pre-Halloween fun shooting at “jack o’lantern” bottle caps at 50 yards

FX Wildcat Compact MK2 .22 and JSB 15.89gr unsorted pellets


More videos to follow…

Hey All,

Up for trade is a very like new BRK Ghost .30 HP.

Gun was just received from Derrick Wall and he has tuned it to perfection shooting the 50.15 right at 875 and is a laser! Has a 580cc bottle and comes with one mag in BRK hard case.

Gun functions flawlessly and of course coming from Derrick is smooth as can be!

Just not bonding with the form factor of this gun sadly as it is an amazing shooter!

Scope, Atlas bipod and moderator not included but negotiable.

Trades considered
.22 Daystate Redwolf HP (newest electronics, can add cash on my end)
.30 RAW HM1000x
.30 or .22 FX Impact MK2 or M3
.30 Cricket Tactical



***Note-have had a few issues with messages as of late but will do my best to respond to folks in order***

I'm sure this is a common scenario.

My T Veteran uses a probe to fill. My in-coming Ghost uses a foster fitting. I have a portable air compressor (GX3-I). Is there a way to avoid having to change out the compressor fill hose fitting to work for both guns?
Thanks

Hi All,

Up for sale is a very like new BRK Ghost .30 HP.

Gun was just received from Derrick Wall and he has tuned it to perfection shooting the 50.15 right at 875 and is a laser! Has a 580cc bottle and comes with one mag in BRK hard case.

Gun functions flawlessly and of course coming from Derrick is smooth as can be!

Just not bonding with the form factor of this gun sadly as it is an amazing shooter!

Scope, Atlas bipod and moderator not included but negotiable.

1700.00 and split shipping

***Note-have had a few issues with messages as of late but will do my best to respond to folks in order***

At 78 I am starting to reach a point where spring piston rifle are not going to work for me much longer. The HW97k is only a five shot rifle before I really struggle to cock it and I can feel the pain in my shoulder and elbow on the first cock. Even my little R7 starts hurting my shoulder and elbow after only 25 shots. I've decided to get rid of the HW97k but the R7 will stay as the grandson loves it. I also have an AirForce TalonSS but the ergonomics puts to much strain on my old neck so it must go. Guess I will be looking for another PCP.

2 each Bluestreaks in great condition for their age and both excellent shooters with nice grained stocks (unscoped needs reseal and scoped has a leak) $215 each add $50 for scope and mounts
2 each extended extended Intermounts (One has a stripped screw but holds up fine)
3 each 2.5x5 1st gen Weaver VX variable scopes
Last a Silverstreak in custom stock that need to be fixed after a shipping disaster. Has adapter for moderator and the stock is minty and amazing as is the action barring the bent muzzle W scope $375
1st 2 to sell/trade get mounts and scopes last gets scope but no Intermount so act fast.
Great winter fixer upper bundle $750 for all split shipping
Open to trade offers. Athlon, Arken, Element +20mag IR scopes, NV, .30+ moderators, AR6, Rainstorm2’s etc
Let me know what you have will bundle for proper trade.
Msg me for better pics and each guns details.
100% feedback here and old YF and AGW selling, buying and trading over decades so deal with confidence.
**some traders with no feedback will need to ship 1st and I will ship once trade item is received and inspected**
Thank you,
Keahi

Ok. I see ppl saying their gun shoot 3-4 fps spread. Like Really? My gun is the fx impact mk2 .25 cal. Reg set to 140 bar. Valve on line 4. Power wheel is m3 set to number 10. Shooting jsb heavy mk2 33.9 gr brand new tin, un-sort. This my shot string from 250 bar. I shoot till it falls off reg, I only count the ones before it falls off reg. Is this good tune or can it be better? How are ppl getting less than 5 fps spread. Is that even possible? What is a acceptable spread for a 2k gun?

My question is, When I re-zero my rifle does it make the scope tape inaccurate? Example, I zero my rifle at 25yds, I chronograph my pellet speed, I use StrelokPro and make my tape marked every 5yds from 40-100yds. My rifle does not loose zero unless accidentally knock around, but I check zero from time to time for minor adjustments... Does a click or two left or right up or down throw off my range tape (markings) on the turret?

I have 7 tins of 13.73's and 2 tins of 15.89's. Purchased in July. All are unopened. I've included a picture of the pellets in the shipping box so buyer will know they will be well packed. $140 shipped Pay Pal Friends and Family or buyer pays fee.

Hello everyone, I ask you a question, I tried to ask AGT, they answered, but not fully.
If I buy a Vulcan 3 today with 700mm barrel, say in .22 and .25 calibers, what barrel would be installed? I mean brand, twist rate, choked or not, rifling or polygonal...thanks for the answers

Today I received my new Air Venturi 74 CU FT Air Tank I started filling it with a compressor. when is got to about 298 bar it vented a little bit of air as if I had blown a burst disk. What was wierd is after it vented, it went back to filling with no leaks..I know when a burst disk blows thats it it need to be replaced but are thses tanks designed to vent somehow when the pressure get to high? Kinda shocked me so I stopped filling it. It reads on the compressor 268 bar but on the tank it reads 300bar. This is a 4500 psi tank so it should go up to around 310 bar

I was told by someone that they could not get parts for my HW air rifles because of some delay from Germany. Is this the only place you can get oem parts for HW air rifles ?

Hi there im thinking to buy Vulcan3 HP 6.35 my question is it is capable for hunting fox coyote or other small games we all know that this gun is powerfull and accurate

I'm going to be getting the 500mm .177cal barrel for the Crown MKII (don't like the 600mm length) and was thinking of trying some slugs with it. Does anyone have a recommendation on slugs and suggested velocities they would like to share?

But the trigger was awful,some could be adjusted better ,others you had to find ways of making it better.I think that a good trigger on a pistol is very important,it is just too easy to "pull" a shot on a pistol.
After pulling triggers tens of thousands of times,it is the the "trigger break" or 'let-off' for me that is most important.
Many guns need time to break in,like the wearing of the moving surfaces ,some triggers are just junk and will never wear-in,that is the time for you to smooth the moving parts.
Many of my Crosmans and Prods can have splendid triggers,the Crosmans can be fixed ,my Prods wear in great.
A trigger finger needs to be trained for feel,your mind,body,trigger integration also must be one.
Sight picture ,trigger pull,breath and follow through,all this comes together is seconds in offhand shooting; using a rest will make things too easy.
Offhand shooting well help you with all the above,it can become frustrating at times,but do not give up,I say this because once you set your butt down on a shooting bench your offhand shooting days well maybe over,..I see my ADD mind has wondered again,another reason shooting for me is such a joy,take aim and shoot ,how simple is that

So atn released their new model the xsight 5. It's supposed to record up to 240fps in 4k. But I can not find any videos on youtube showing this. Most ppl who review this scope is using it on a firearm and doing normal 30 fps. Specs says it can do 4k 240, why the f are these reviews only doing it 30fps. Smh. Anyone have the new xsight 5, can you confirm it can record 4k 240 fps. And is the video better than using a gopro scope cam at 1080p 240fps.

Was gifted a 22 panther Hunter compact. pls help with some questions:

if I buy just a 300cc bottle and valve is there anything else I need to connect and add another bottle on the stock? I actually want to get the next size larger then put the front bottle at back. I have never had an FX so I’m not sure if there is anything else needed.

so hard to find parts always back ordered or not even sure if they sell it

the panther slug kit the harder hammer and probe would this allow me to shoot slugs better from my 22 with stock barrel?

i like 22 but are there kits for larger and longer barrels and plenum? I found on Europe airgun they sell the macro xl plenum for the panther not sure if this will work on Hunter compact as it look as it’s missing the shroud.

I hope this isn't in violation of the new rule re: suppressors, but the Daystate Pro System looks very interesting.

Hello AGN:

I have two (2) Brand New, Never Installed/Used Sekhmet Gen 2 Pro 28mm Digital Air Gauges available for sale. These are the 1/8 BSPP threads that will fit on FX, Edgun, Daystate, BRK, Airgun Technology, Kalibrgun, RTI, RAW, and other popular brands. Please do your research to make sure this thread is the right one for your rifle prior to purchasing. The box was opened and gauge verified for proper functioning but has never been otherwise installed or used.

Price is: $90/each delivered to your door.

I've got plenty of positive feedback here so please feel free to check them on the Member Feedback forum prior to purchasing. Paypal Friends & Family payment is prefered (otherwise, please add 3.5% to cover the fees). Local pickup in the SF Bay Area is available as well.

Thanks!

Shoots great and holds air. Cosmetically is in ok condition. Missing battery cover. Comes with one mag. $450 $400 plus shipping. PayPal or Zelle accepted.

Another beautiful morning here in Southern Oregon. The wind was light and varying slightly.
When I first got there the prevailing wind was coming from the right but as the sun came up and warmed things, the thermals started to blow up the canyon from the left. Probably the trickiest part of this area is the up/down drafts messing with your vertical. All in all, still a nice morning for shooting.

I did take the time to get a rough measurement of the rock I was aiming at with the Vortex Golden Eagle set on 40x. Looks like a little over 1 MOA wide by about .5 MOA tall.

Sorry for the noob question, but is the fill valve different on the FX M4? If so, do I need a different attachment/adaptor?

While I did end up killing 4 squirrels this morning I started off by missing the 1st 4 in a row.. the shots were 35-40 yds offhand and trying to thread pellet thru open spaces in limbs but my offhand shooting isnt what it used to be. I did sort of redeem myself by making a 60 yard shot on a big female fox squirrel sitting out in grassy field by a big hickory cutting a nut..Hit her thru the neck DRT. Gun used was my MKII Crown Continuum .22 w/380 mm barrel and 18 gr JSB, they sure make a pop when they hit a squirrels noggin. I killed the last 3 squirrel in less then 10 minutes, had squirrels running around everywhere for a short time.