Although my Huben GK-1 now serves my (hunting) purposes better, I consider the AP-16 not only a higher quality PCP pistol, but it's definitely more accurate and has a much better (and adjustable) trigger. Two five-shot groups at 50 yards-




I'm willing to sell my AP-16 with or without various options. My preference would be to SELL the whole set without optics with both Long and Compact barrels and chamber-tubes, original grips, factory adjustable iron sights, box, manual, fill-probe and two magazines for $1,000 including CONUS shipping..The Pachmayr finger-groove grips pictured would be an additional $35.

Although I won't sell the Long barrel and tube separately, I would sell the Compact barrel and tube kit for $150. Be aware the gauge on the Compact tube reads very low; so you'd want to depend on your filling device gauge for accurate pressure of the Compact chamber-tube.

Other than the inaccurate gauge on the Compact chamber-tube, everything else is in mint condition, has no other issues or problems (functional or cosmetic), and SHOOTS LIKE A HOUSE AFIRE! More evidence of that fact can be found in several of my past posts by searching them with the key word AP-16.

To some degree I'm willing to mix and match to buyers preferences, including many rifle or pistol scope or red-dot sight options. Shipping charges are not included in these prices, except for sale of the whole (Long and Compact) SET.

Prospective buyers can feel free to call me at 254-253-1239 for more details and questions.

Thank You,






.

just got back from doing some fence mending and seen these guys on my cardinal feeders.
K1 is always just a grab away in the barn office just for these pest critters.
this type hunting is called farm equipment preservation and theft pesting.

It has the super high power plenum, high picatinny rail, huma reg, one oem mag and 4 aftermarket from QD Fox, and of course the beautiful FORM stock. Tuned currently around 850 with 18g jsbs, same tune with the 15g diablos in the low 900s. Roughly 3 mags per fill. I also have an over the barrel carbon fiber shroud with an 0DB moderator attached to it that slides right on. Not exactly sure what I’m looking for but open to ideas..

Edit: most likely looking for a .30 or a AGT vixen, but who knows open to discussing. Chat here or call/text 352-456-9263 - Nick

I'm sure someone has asked this, but I can't find it in search.
Can you leave a pcp fully charged all the time, so it's ready to be used on a seconds notice?

I’m still trying to decide if I’m going to the Indiana airgun show. I’ve got other things I need to do and it’s a long drive, but I really want to go. Hmm.
Who all of you guys might I see there?

Anyone else really like their cheap pcp's? For those of you (like me) who are into sub-$300 PCPs, tell your story!

Mine is:
My sub-$300 PCPs are more accurate and powerful than any of the expensive German springers I've ever owned.
Shooting my Maximus and Stormrider (both in .22) is just fun.
My 6 y/o Maximus still spits out CPHP 14.3 at 865 fps!
They're cheap so I don't obsess about them like I do with expensive stuff.
They take me back to the simpler days of airgunning. They bring back the fun.

This isn't just about your favorite cheap PCP.
Tell us why you're into them!

Looking to trade a fx panthera 500 .25 cal with arken sh-4 gen ll. 6-24×50 scope. Looking for another m3 compact. Can add cash on my end. Located in California.

After making a couple changes to the sights on my FWB 300s, I decided to give an official 10-meter target a try. My indoor range is actually 11.5 meters, close enough. As much as I like my scopes, I’m really enjoying the diopter sights.

Starting on my next project. Some carbon fiber wind flags. Still waiting on a few more parts

nla

Mint condition Taipan Veteran II tactical in .25 550mm barrel. Comes complete with OEM paperwork, target, box etc. The rifle has a full Titanium bolt kit (monster bolts). Tuned to shoot 33.95 gen 2's at 920 fps (lights out baby). I bought this when it first came out but never shot it as much as I wanted due to travel. I will include a Ergo AR vert grip and three magazines along with holder. Get it while you can. 1450 OBO shipped. I accept paypal only (buyer responsible for fees or F&F). Scope and Tri-pod not included.

Alex

Hello fellow airgunners, hope all is well!

So I bought a brocock commander off the classifieds last week, I’ve wanted a brocock for a while now and pulled the trigger. Great rifle, almost no complaints! I noticed first shot that it sounded like it was waisting a ton of air and it seemed like it wasn’t getting as many shots as I’d expect.

Well I went to tuning on it today to see if I couldn’t help these issues. Played with hammer spring and raised the reg pressure up a tad. Still sounded like it’s dumping a lot of air, even with the HS backed way off. It really sounded like it had a bad case of hammer bounce but the gun seems to have a slingshot hammer setup which is how I cured my Kral guns of hammer bounce so I somewhat dismissed the hammer bounce problem. After playing with the tune and no difference in sound I decided to slo mo record the hammer and sure enough it’s got bad hammer bounce. My cure to this before is the short stiff spring/slingshot hammer but with this one coming from the factory setup this way I’m not sure what to do.

Any and all help is greatly appreciated!

Beau

I bought this rifle about 6 years ago if my memory serves me correct. When it arrived I couldn’t help but stand back and admire the craftsmanship. Up until that point I had gone through some low end and midrange rifles like the Hatsan , Benjamin, Evanix to name a few and in my mind thought they were great rifles. I have previously described myself as a chronic tinkerer. Never leaving anything stock from motorized vehicles to vacuum cleaners. In fact I was so impressed by this rifle , I ended up with 4 at one time. Sold three of them off to fund other projects but this one stayed with me.
It has all the features one man could ask for in a rifle. It’s has an adjustable regulator ,anti double feed , rotary magazine( best I’ve ever seen) an externally adjustable hammer, great adjustable true two stage trigger, multiple choices of stock and lengths, accurate barrels , and are simple to work on and have tons of aftermarket parts.
I have added a few personal touches on this particular rifle, like sling studs with a Caldwell picatinny adapter magazine holder and biathlon lever. Made some minor adjustments to both the hammer and regulator. Also added a longer air cylinder ( not in this picture)
This rifle hits exactly where I aim from the first shot to the last shot on the regulator. It’s tuned to shoot the JSB 10.3 grain at 840fps. The perfect paper puncher.

My beloved

HW100TKFSB45​

Boy this one was full of emotion. This is why I got into air guns. So I could quietly dispatch threats to my family. I took the pup out, and I can see a brown figure absolutely zooming toward us through the woods behind the brush. Coyotes are a thing here, fairly large ones. So I knew the score. I am glad my dog listened right away and came right back in the house with me when I called her. So I went to my upstairs office where my .35 cal M3 Impact is on a tripod firing 93 grain nsa slugs at 920fps.

I opened the window slowly to my office and sat down on my chair. I could see the coyote retreat to roughly 50 yards. He seemed to have found some food, looks like maybe a rabbit. He felt safe at that distance. This is what happened next….

P.S. after that video I put one more in his head just to be absolutely sure and watched to make sure there wasn’t any movement.

Hey folks,
I'm looking into picking up a Huben K1 mainly for shooting slugs, and I’d love to hear from actual owners and their experience.
I have read about some compatibility issues where slugs wont sit well on magazine.

Between the .22 and .25 variants, which one performs better with slugs?
Both calibers need a pen to seat slugs inside the magazine?

Also open to suggestions. If there’s a better semi-auto slug shooter out there that rivals or beats the K1, I’m definitely interested.

Hey Airgunners!

I have three Leshiy Classics - recently serviced, sealed and tuned by Derrick Wall. Various configs and accessories are available, any caliber(s) including a very rare 250mm .357 barrel (not pictured). They’re a very flexible platform so parts can be moved around as requested.

Base price for a .177 with stock accessories is $1000 $900 and goes up incrementally from there depending on your choices of extras.

DM me for detailed pictures of each rifle here and your list of desired options and let’s price it out. I’m thinning the herd folks - and these are bargains since they’re solid mechanically now that Derrick at Tenacious has worked on them - shot string info is available as well.

Thanks for looking,
Mark

P.S. I should mention, I don't have unlimited barrels and sizes available. They're fist come, first served. I've been answering messages for an hour now with multiple folks.

P.P.S. The base price of any of them are at $1000 $900 starting point - we can negotiate the extra's like the dual tube, grips, etc. to a mutually acceptable price. To give you an idea, the custom wood grip would be an extra... the optics if you wanted would be extra. Huma Regulators (two are installed and tuned) would be extra. I will be absolutely reasonable on price. I need $ for another project so these will be sold in short order.

Anybody used a A18 Co2 powered squirrel trap/ head thumper?

I have crickets, Uragans , vulcans, Veterans, Mutants Hubens, Pistol/rifle.Notos, PP750, and reximex ,, I have the 225 pc sae, and meteric on ring box from fright harbor Nitrile if that means any thing, also 270 pc oc green oring seems to be all sae Bot a box of red o rinds about 250 pc no size markings and onother red box wit a huge selection of O rings on T post,,, The ones the made the day to day fixing my Vulcan ii and my PP750 pistol was a set I bought for my Crickets 15 years ago...
Can I buy a box of many O rings just set up for PCP air guns in there common size with the correct O rings in them, Not all rubber O rings are made the same, Is there a best ONE? I bought some from the O ring store that some one told me about for the barrel of the RTI , I think I bought 50, And I have almost used them all I have 5 barrels for my RTI guns , So 50 was just right,,,, And NO I am not good with a caliper, OK but not good,,,,
I am wide open for suggestions , Lets here them,,,
Mike

Moving Through Network
Arrived at USPS Regional Facility
DALLAS TX LOGISTICS CENTER
April 5, 2025, 4:03 pm

In Transit to Next Facility
April 5, 2025, 3:35 pm

In Transit to Next Facility
April 5, 2025, 5:35 am
Arrived at USPS Regional Facility
NASHVILLE TN DISTRIBUTION CENTER
April 5, 2025, 12:41 am
In Transit to Next Facility
April 4, 2025, 11:45 pm
Departed USPS Regional Facility
MEMPHIS TN DISTRIBUTION CENTER
April 4, 2025, 9:01 pm
Arrived at USPS Regional Facility
MEMPHIS TN DISTRIBUTION CENTER
April 4, 2025, 6:32 pm
Departed USPS Regional Facility
CHICAGO IL LOGISTICS CENTER
April 4, 2025, 5:17 pm
Arrived at USPS Regional Facility
CHICAGO IL LOGISTICS CENTER
April 4, 2025, 4:08 pm
Departed USPS Regional Facility
DALLAS TX LOGISTICS CENTER
April 4, 2025, 10:28 am
Arrived at USPS Regional Facility
DALLAS TX LOGISTICS CENTER
April 3, 2025, 6:38 pm
In Transit to Next Facility
April 1, 2025
Arrived at USPS Regional Origin Facility
SAN DIEGO CA DISTRIBUTION CENTER
March 28, 2025, 7:10 pm
USPS in possession of item
LAKESIDE, CA 92040
March 28, 2025, 9:48 am
Hide Tracking History This is almost Laughable .

Was at my permission setting up shooting lanes and proped my Atomic up. And this peahen decided to check it out… The darn thing is bigger than the BRK… but I must admit she has good taste…

After watching this, I'm curious to know how these guns actually shoot.
R

I sent my Gk1 back to New England Air because it wouldn’t take air, last Saturday their tech called me and said the valve had jammed, that it was not user error and it sometimes happens, the pistol was now working great. I received it today, it had no air in it, I tried to fill it with air and it wouldn’t fio. I checked my compressor and it’s fine, I use two differnt fill probes, no success. I contacted John at NEA, he said to take the back off and push the cylinder all the way forward, i did that and it still won’t take air. I do not feel any air coming out of the barrel or anywhere else. Has anyone else had this problem?7

I've had this rifle awhile and it just never sees any use. So I thought I would try to pass it along to someone who might enjoy it more.

Like new condition, comes with two magazines, soft case, and eagleview adapter to use 1/2x20 moderators.

Has Huma regulator installed at 90 bar, and is shooting ~21fpe with JSB 10.3 pellets for more shots than I ever cared to count. Factory reg was giving the same energy but using a lot more air. Sorry, I currently don't know where the factory reg is, but if it turns up, I'll include it so you can go back to it if you want.

Asking $1200 shipped and insured in the CONUS. Prefer PayPal friends and family or add 4% to cover fees. Will also accept a USPS money order. Scope and rings not included.

Message me here or email direct at tobinwebster at yahoo dot com.

Got a Leshiy 2 Alpha Precision 600mm .25 barrel that i had modified by Alien Airguns and Bargains to fit an Huma/FX transfer port and also cut 1/2x20 threads for an fx shroud. It shoots pellets and .nsa 34gr .254 slugs great. I decided to just stick to pellets and keep my impact in compact form so thought id sell it. Can come with the impact shroud for a 600mm barrel but it is about an inch too long so would need to be cut down. $300 plus shipping for the barrel.

This is the Tequila GUN air pistol. These are hand made by one guy. The only place to get them is off his eBay account. ...oh yeah, and it's the best PCP pistol I have ever shot by far!!! Must have item for the guy who has everything. Thanks for watching! -Nate