Scope not included.. but will include a compact utg recon 360 bipod and the bag you see left on the pic .. 25" long with the plenum included..you will not find another compact in this configuration ,we're the shroud ends perfectly with the air tube..4 magazine with the gun to no trades .. all factory gun aside from the moderator adapter n plenum ..$950 - obo - shipped 3 day priority ..PayPal ff or add the fees..thanks

FX Impact .22 600 MM - $1,475

Setup includes

• FX Impact MkII .22 with 600 mm barrel
• Upgrade – 720 Power Plenum Kit – installed by FX Airguns
• Upgrade – FX Carbon Fiber Liner Sleeve
• Upgrade – Huma Max Grip Knurled Side Lever Handle
• Upgrade – Huma High Flow Pellet Probe
• Upgrade – Saber Tactical Bag Rider
• Upgrade – Wika Gauges (regulator and bottle)
• FX Impact Hard Case
• One .22 magazines
• Original parts I've also included – FX Gauges, pellet probe, side lever and bolt
  
  

Payment – Paypal

Shipping Included – Free to Lower 48 US

I was going through some pellets and discovered that I had these. I don’t have any use for them for my plinking needs. All tins appear full, but differ by a few grams in weight so I may have used a few here and there. Asking $85.00 shipped CONUS for all 4 tins. PP F&F is preferred.

For Sale: .35 cal Ataman M2R Tact Carbine

150 FPE with 81gn PELLETS! This rifle is best described as a Supermodel with a wicked punch. Stacks pellets and Lucky 7 Meat Punch slugs (and is a proven deer killer)

Includes Donny FL Ronin, installed sling studs and fore stock pic rail, partial tin of 81gn JSB/FX, a sample assortment of slugs that will work great in any .357, and best of all - an unopened 100 pack of Lucky Seven Meat Punch slugs that were (literally) made to shoot out of Ataman .35’s, but will be great in any .35 of comparable energy level.

Selling to fund a ridiculously expensive crossbow.

Scope not included, additional pics available on request.

$1300 shipped anywhere in CONUSA, but would prefer to deal in person (if possible) for a reduced price. Prefer text, as I’m not on here very often. Thanks for looking!

I have 100% positive feedback going back 20+ years here and on the old YF as Brian in MI - My Insta is @airgunner.usa serious inquiries text: (248)470-8227

Compressor, tank, Air dryer.

The Compressor runs and works as it should. No issues. Intake air dryer and water temperature gauge added. Everything in the pictures. Original heavy duty box for worry free shipping. Selling for loss of interest.
$700 plus actual shipping costs.

Preferred payment method is PayPal or postal money order.
Call or txt 717 698 8948
Located in New Oxford PA

Selling my RAW 30. It’s a fantastic shooter with a sweet RAW trigger that must be experienced to be truly appreciated. Just posted a perfect 200 card with it in the 30Y challenge. Absolutely nothing wrong with it at all and I am only selling it because I am getting out of 30’s. Includes 1 RAW mag, 2 SS CARM trays and a Donny FL adapter to install on a Ronin .30 moderator. The Ronin is not included. The shroud has a male thread that fits the included adapter. $1575 , now dropped to $1475, shipped in continental US, via PayPal F&F or add 3.5% to cover fees. Not interested in any trades.

This is only posted for sale here on AGN. I’ve sold lots of stuff here so feel free to research my history and feedback.

Selling my Jumbo Dazzle .22. Has a high power tune from Troy Hammer. Very accurate and loves slugs. Right now shooting JSB 24gr redesigns at 870fps but can shoot them must faster if desired. Also loves NSA 20gr slugs around 980fps. This is a great gun but selling to fund my recent Delta Wolf purchase. Also added a 580cc carbon fiber tank. Comes with 3 mags, 2 stock and one Carm mag. Also will add the Donny Tatsu moderator. Shipped in original hard case. $580 shipped. PayPal FF. PM, text or call with any questions. Ed 520-965-7362

I'm thinking many of you remember Ranger Rick when growing up... A friend to all the "furry forest friends". I realized recently he's still around, well... I have dubbed my Brocock Ranger XR - "Ranger Dick". 'Cause he ain't friendly to any of da "forest friends" or any of the critters around farm fields, or back yards, etc etc...

You may have noticed a few replies where I have added my two cent... Well, actually - 3 1/2 cents, with inflation and all... Anyway, I thought I would share a little more about my experience so far with my Ranger.

I have had mine for a little more than months now and I really like this little rifle. Yeah, I have a couple pet peeves with it, but one must remember what the Ranger is intended for.

Peeve #1 - The folding stock arrangement. It rattles so annoyingly, that I just had to do something about it. Most of the rattle is the stock itself. I'm wondering if Brocock is using a "commercial spec" stock even though the "tube" is mil-spec. So, I measured the "tube" just to be sure and swapped the stock out with a "Magpul MOE SL® Carbine Stock – Mil-Spec"... Ahhh, much better. This stock has a couple spring steel straps in it to snug things up (I have used these before) and with Magul's quality products... Now, just the folding hing moves a bit. Maybe I should go measure the supplied stock to see what the tube opening is?

Peeve #2 - the slop in the hinge. Oh wait I covered that in "peeve #1. Really I am being nit picky.

This Brocock Ranger XR is extremely accurate. I experimented with 15.89's, 18.1 and some H&N 21 grainers (from what I see here I'll give some CPHP's a try too). This Ranger shoots 'em all very accurately... As long as I don't drink too much coffee. Speed of course changes some; I need a new chronograph - I have had bad luck with those "reflective" POS's... They didn't stand up to my tantrums very well either.

Anyway, The Ranger XR is a great little rifle. Accurate out to 50 yards easily. And I have "knocked down" Starling sized birds out to 79 yards (best so far).

So, I'll quit rambling here and attach a few pixs, including my Ranger with the new stock.

Happy "pesting" ya'll.

Trying to decide which to order Lefty for HW 97K

Just a fun thread. When I was traveling across the country my friend David plastered the back of my trailer with a bunch of airgun stickers. Eventually I plan to have the whole trailer littered with airgun stickers, just for fun. You guys have any? Post 'em!

It has been said that optimal speed for pellets is among 850 and 920 fps.

Which would be the optimal speed for the slugs shooted with air rifles, considering a normal hollow point NSA?

Hi,

I am looking into getting my first .22 air rifle, after my Daisy 880 is showing a lack of power against the critters that destroy our garden - clearly need something in the range of 15 to 20 fpe. However, due to intending to use it for pest control purposes + backyard target shooting and having neighbors, it also shouldn't be too loud, so some kind of noise suppression is necessary and for this reason .177 won't do, as I'd have to go supersonic there.

And when I look around for things that fit my budget, it turns out that there are some really cheap break barrel options (e.g. Hatsan AirTact, Gamo Wildcat Whisper), and the next group appears to be mag-fed break barrels or underlevers.

So I am wondering, are these even an option for me? One issue is that I want to minimize the amount of lead in my garden, and thus would prefer shooting mostly PBA at targets.

Now I am aware that some pellets in the lead-free area have rather odd shapes and sizes - e.g. the Crosman PowerShot Gold Flight is extremely long and barely fits in my Daisy 880 breech, and the Gamo Luxor Cu is just crazy (BTW: not recommending, it behaves aerodynamically just the way it looks), I would assume that I will get problems with the magazines rather early than late. But as one example, with Gamo I can't get the Maxxim or Fusion noise suppression and the recoil reducing rail without also getting the magazine.

So I wonder, can some or all of these also be fed without using the mag, if necessary because either my mag broke or the pellets are simply too big? Or is that impossible or dangerous? Does this differ between manufacturers, or if it's a breakbarrel, I can just use it with the mag removed and insert pellets into the breech by hand or pellet pen? If this does not work conveniently, I can at least already strike out anything with a mag from my list (and might then go with the Hatsan AIrTact, as it also has open sights so the scope isn't a single point of failure, and if it breaks, it wasn't expensive anyway).

Guns and pellets. Fx tarantula .22 shooting Grey lable jsb 18.1. Best jsb made. Fwb 300s mini. Old jsb 7.9. The old guys still rock.

Well, my little F10 went from Hero to zero REALLY quick.

Check out post #12 here....

Forgot to mention that the bearing went out on the fan in the midst of all this, so had to replace the little computer fan too.

Finally got it to build pressure after trouble-shooting multiple leaks on the hard line connection to cylinders, which ultimately took some of the yellow teflon tape to remedy.

After all that, pressure built up to around 4100psi, and then it imploded again. Not literally, just mechanically. Simultaneously the: retaining washers for the connecting bar went flying, the connecting bar itself launched a few feet, the bushing for the upper cylinder rod slipped out of it's home again, causing the connecting block to bend the right support column, AGAIN. I was able to bend it back once, but aluminum only bends so many times before it snaps......

Gathered up the pieces and found the oil impregnated bushings on the connecting bar are shot. Luckily they're a wear part so it didn't oval out the holes in the connecting bar. Looks like they can be had from Mcmaster-Carr.

Obviously, I've got things all out of alignment at this point, but not sure what to do to get them all happy again.

I've got a parts request out to OCO labs and can't do much til I hear back from them. Thinking of a new crank arm and connecting bar.....if they can be had. I'd like to get er running again, but also sick enough of it that I just dropped some coin on the Yong Heng, "hardback" non-set pressure variety. I spent a few hours comparing Ebay versus Amazon as a source and ultimately settled on buying from Amazon retailer, "smarketbuy" partly on @Gerry52 s recommendation. https://www.amazon.com/dp/B0829HBRPD?psc=1&ref=ppx_yo2ov_dt_b_product_details
Clicked on the $14 coupon to get it down to $256 pre tax and $293 post tax, and also sprung for the 3 year protection plan for $34. All said, $327 and supposedly will have it by the end of the week. Yes, I consider it disposable.

Spent a bit of time looking at the GX compressors but my goal is to be able to fill large tanks, and it seems like the GX stuff is not liquid cooled, and directed more at the gun filling market. I don't think the Yong Heng is intended to be used for filling large tanks either, but I found enough reports of guys filling tanks in short bursts that I'm going to try also. Seems like a run time of 10-12 minutes and then a cool off of 30 minutes, repeating as many times as necessary, has been working for a fair # of AGN members. Will know for myself shortly.

The really frustrating thing here is that I consider myself fairly proficient in dealing with mechanical issues. I've diagnosed and successfully fixed problems with dishwashers, dryers, washers, fridges, stoves, tractors, vehicles, small gas engines (generators, weedeaters, lawnmowers, etc), etc. When something breaks or otherwise quits doing what it's supposed to, I'm the take-it-apart-and-try-to-fix-it-before-just-buying-another-one type. . After a couple days and too many hours worth of effort, the F10 sure has me stumped though.

I was hoping that F10 would get me a decade of good use, and that's why I originally chose it, but right now it's not looking like it will. Luckily I got in at the $500 price a few months before Tom Kaye shut his doors, and since my local place charges $15 per fill, and then another couple bucks worth of taxes, I've more than paid for the Shoebox by avoiding all those nearly $20 fills for the last 4 years. On that same basis, the $327 for the Yong Heng will have paid for itself in about 6 months, if it lives that long! And if the warranty gets me replacements for 3 years, or even a refund, it will more than pay for itself.

This post isn't meant to be a WTS listing, but notice to you Shoeboxers, if I can't get it running again, there may be an F10 parts donor on the market real quick. Will have to decide if I want to chop shop it and sell parts separately, or one fell swoop sell the whole thing to one buyer. Will try to get it pumping away first.

I need some help! I have a .22 Maverick Compact. Regas at 105-73, shooting 15.89 FX pellets at 871-ish avg pretty regularly. PW at 7 and ihs at 3 1/4 turns.
BUT…….on almost every mag I shoot I’ll
Get 1 or 2 shots(out of 18) that shoot slow-in the 850’s. Accuracy is very good, under 1MOA. I don’t select pellets or weigh them.
I know- “who cares if accuracy is good?”. But I am a bit OCD so just wondering…..what is going on?

Can anyone hypothesize what’s happening?
Thanks in advance for your help!!

I have a few tins of .22 Hades and it’s clearly marked on the tin they are supposed to be 5,5mm but nearly every one gages 4.8mm. I wonder if anyone else has gaged them and what have you measured?

I want to sell the stock from my AR6 pistol. $200.

Shot the three upper groups last night. This morning sent five CPHPs. TP level 2, scope on 12x. Love my Atomic XR and a cup of coffee on a Saturday morning.

Fail Fail Bad Bad

Y'all chew on this. The image below is a compilation of results from quarterly Textreme Field Target matches held at Ranchito Robinson, Clifton, TX. These matches were held from Dec 2021 to Sep 2022. There was a two day match in June and I reported the two days separately.

Art "Podna" Womack
Team Wolfpack
@art.of.airgunning

So allow me to lay down some facts of the couple month long affair with my recently acquired Zeus Gen 2 in the one and only 72 caliber.

Fact #1: It's expensive to feed. The majority of guys who own this rifle, are not going to plink a ton with it. Hunt in some states, sure, but in general, this is a close range, "what the heck can I obliterate with a 1300 grain projectile" kind of weapon. $1.50 of lead and $1.00 of air per shot doesn't make you want to blow through 50 slugs in a day.

Fact #2: it isn't a dream to shoot. (not to be confused with the absolute dream of what happens after you shoot it) The Zeus weighs about 10000lb in it's 32" barrel configuration. The trigger is single stage and probably 10lb to break. The stock is ugly and the cheek rest is so low, you'd have to have three chins for it to be usable.

Both these facts considered, the 72 cal Zeus is the epitamy of a party trick. It's the iconic, "hey man, wanna shoot my pellet gun" kinda thing. You hand it to someone, their eyes bulge, they explode in laughter, etc. It makes anyone a kid at Christmas.

So, I decided to improve the shooting experience a bit!

Bring out. The stripper.

Time to get rid of that mud varnish paint coating or whatever was on this piece of walnut.

Alas, a knot! Never knew that was there. Let's just trace out a happy little pencil line...

i recently got this from a member here and it was not performing well with my pellet assortment.
so i recrowned and polished the barrel and now its 1moa @ 25yrds.
it does not cycle the mag sometimes with heavy pellets. thats where my eyesight limits my ability to repair.
its very accurate with jsb 18gr down to crosman premiers 14.3 with POA adjustments.
has Hadjimoto's baffle stack i installed which does much better than the stock baffles.
fill probe with foster adapter, 2 mags
holds air perfect and in great shape.
$200+ shipping. paypal friends or add 4% for the fees.
this gun shoots very well with the above mentioned pellets.
scope and rings NOT included
listed on other sites so time stamp rules.
and as always......thanks for look'n

Amazon has two high end sightron scopes one priced at $2900.

SIGHTRON SVIII 5-40x56mm ED FFP Riflescope, Zero Stop Illuminated LRM Reticle​

The other is priced at $1600. cheaper ​

SIGHTRON 25003 SIII 30mm Riflescope 10-50x60mm, Long Range MOA Reticle​

Who knows the difference at these dollar price points- where’s the value?​

I'm looking to buy a Sightmark Wraith 4k mini.

If you have one you are not using and would like to sell, please let me know.

I have a like new Element Optics Titan 5-25 scope if you are interested in a trade, otherwise PM me with details and your asking price.

thanks,
eric

This Webley product seems like it should be great, but it requires three hands to operate: one to hold and squeeze it, one to remove the pellet for loading and one to hold the airgun. That is why it looks new - never used.