Just before the months end!


…and you can too

I I live about 60 mile south of Chicago and the smoke and haze is so thick I can't even go outside!! Never seen anything like it!!!Hopefully the wind will shift and clear out some of it..

LIKE NEW DAYSTATE COLTRI COMPRESSOR 110 30 AMP 10 HOURS ON IT FROM NEW. HAVE ALL PAPERWORK ORIGANAL BOX. EXTRA OIL AS THIS ONLY HAS HAD THE RIGHT OIL IN IT, CHANGED OIL EVERY 3 Hours JUST TO KEEP IT CLEAN, WAS 2600 1700 OBO SHIPPED NO TRADES POST PICTURES LATER

Can anyone tell me what barrel krait uses? CZ berrel ? square or circular rifling ? Who owns the krait please give me some pictures of the barrel's rifling. 1 or 2 ?

Up for grabs is original Prophet Performance 1 .22 with the long range barrel. It shoots the .22 JSB monster redesigns light out at 970s. This thing has been just begging to be shot, but just been busy with other projects. It has been the most reliable gun that I have owned yet and incredibly robust. The gun comes with an externally adjustable flex regulator. The reg is not pretty but all the gauges work great. The deal from the guy that didn’t know what he was doing was just too good to pass up on the reg. This thing is a hunter and darn good at it. Shooting prairie dogs from 10 yards to 175 yards with pellets!

The camo vinyl stickers can easily be taken off without damaging the gun or bottle.

The gun will come with 1 original mag, 2 orion mags, jb3d butt hook with mono pod, short ODb moderator(not in picture) and barrel band. SCOPE NOT INCLUDED.

I’m asking $ 1500 $900 obo you pay shipping.

First picture group is at 100 yards with two little flyers.
2nd picture is top group 75 yard and bottom group 50 yards.

What does x represent, what am I solving for? Should be fairly simple.

x = ChamberVolume*(ChamberPressure/(PlenumPressure-PlenumPressure*PlenumPressureDropPercent/100))


x = ChamberVolume*(ChamberPressure/(PlenumPressure-PlenumPressure*PlenumPressureDrop))

Bonus points if you can tell me where this equation may apply in an airgun.

-Matt

Up for sale is a LNIB Fx Maverick Sniper .22, this gun was only fired at Trenier Airguns to test functionality and check speed. A friend of mine purchased it from Trenier Airguns around October of last year and has never took it out of the case. The gun is still holding air from leak test before it was shipped out so there are definitely no leaks. I've looked this gun over and it is seriously like new. Asking price is $1250 shipped and includes everything in pics. PayPal FF or please pay fees if interested please PM me.

Recently I became aware of the block or ignore button. I have read a few posts about the issues that come with that. My question is this...
I blocked a member who (To me) was annoying and commented his/her opinion on EVERYTHING throughout a thread. In my privacy not through a beef I blocked him/her but since him/her comments on EVERYTHING many threads (i guess) don't appear.

Admin question: how do I UN ignore/ block this member so I can see threads? I can scroll past just seemed convenient..

new format at AGN , have to retrain PC mouse to hit forums , not featured items .

Up for sale is this nice HW100 Carbine. Beautiful walnut stock and the factory moderator makes it very quiet.Includes magazine and fill probe. Scope and mount not included. Only selling because I do not have time to shoot it. $875.00 OBRO shipped to the lower 48 UPS adult signature Insured.
Paypal friends and family or postal money order for payment.

I moved from So Cal to Prescott AZ and thought the days of finding deals on craigslist were over. About 20 times less people. Then this pops up for $1000! I really didn't need it but who can say no to a deal right?

IMy wife and I was setting in the kitchen when a diet soda exploded in the cabinet, it was very loud, The can was bent all out of shape like I shoot it with a hollow point .
Now I have had a Carbon Fiber 4500 psi tank fail on me and the Carbon bands just let go with tiny little leaks.
Leads me to think the metal tanks when they fail the metal fails, On the Carbon fiber tanks the carbon bands fail and just let go very slow,
Mike

For sale as a lot:

1 FX 44 open tin, 103 count
1 FX 50 open tin, 130 count
1 JBB 50 open tin, 145 count
1 JSB 44 open tin, 106 count
1 FX 44 Atomic / Hades open tin, 143 count

Unopened sealed tins:
1 FX 44
1 FX 50
1 JSB 50
4 JSB 44

12 Tins in total, $175 shipped, PayPal preferred. I have lots of positive feedback so bid with confidence. Priced fair, no trades or low ball offers please.

i just traded for this rifle nothing wrong with it hold air fine i just not to big fan of 177 no scope

Anyone have an idea to what the thread size is on the HW44 moderator tube ends/end cap/barrel adapter? Looks like possibly a 1”-24 or 1”-27. Taps are expensive. Thanks!!

Up for grabs are 2 new scopes, not even taken out of original packaging. Just did not get around to needing them.

UTG is SOLD


Centerpoint 4-16×40 SFP 1 inch tube.
Still in blisterpack.
55 Shipped and insured.

PP f&f, or other payments can be discussed.

Check my member feedback; it's all good.

Going to be rebuilding my 1977 hw50s and my 1980 beeman r7, just trying to figure out what I have without taking the rifles apart....I prefer to disassemble the rifle when I have parts in hand,if I have to disassemble to know for sure I will,but hopeing someone knows a date for sure.

Can some one that has both rifles give feed back about which one think is more accurate at long range please?

I have a athlon argos btr gen 2 6-24 that I'm not using and would prefer it go to someone who can. It will come with a printed throw lever and focus wheel done by Elis5173. $275TYD any questions feel free to ask. Mount can be added for $75

I have a donny shogun .30 my impact loved it was the best but sold it so this can go. It's 1/2×20unf $145TYD any questions just ask.

Dont tell me you guys have never said to your self ok just one more shot , then an hour later ok this really Is my last shot . Happens to me ever time I shoot .

Up for sale is my Edgun Leshiy 2 with many, many extras. This Leshiy 2 has the new Huma Raptor regulator installed and still has the original regulator as well. This is the 250mm but will come with the 450mm alpha barrel and the Lothar Walther. It will also include the 600mm barrels in both as well. Will include the new 600mm Behemoth kit and multiple hand guards in carbon fiber and aluminum. Will include the Edgun Shorokh, and Tishina kits and a few barrel tubes from one of our own members. Also has the 350mm kit from Donnyfl so you can use one of his or other moderators.
Has both the standard air tube and 350cc 300bar bottle. Comes with 5-.30 magazines with 2 being for slugs. Also comes with the Master and High power jets, extra pucks and 2 full o-ring sets. Also included is a .30 conversion should you want to use an FX barrel.
The picture shows the scope and DonnyFl Ronin which are not included but can be for an additional fee. Easily over $3000 for all the items but selling price is $2100 and buyer pays paypal fees and shipping within the US, not to include PR, Hawaii or Alaska.
Please check my sales history and don’t hesitate to contact me with questions.

My question is this:
How much of a performance difference is there between a gun with a power block vs a gun without it?

I want a M3 and many nice guns without the block are coming up for sale. I am not a big long range slug shooter and currently have a MKII Impact so my thinking is if I am going to go with a M3 I should get the power block version.

Just thought I would get some factual opinions.

Thanks

Hey guys. I want to love this Pathera but I'm confused. I could not get it above 880 fps with 25.4gr ammo. That's a 4 on the Micro and 115bar on the reg. Turning the reg up does not increase the FPS. Turning it past 140 bar will begin to decrease FPS. No setting between 100 and 180 bar would get me over 700 fps without that micro wheel cranked to 3.5-4+.

My question: Does the Panthera require extra parts to achieve over 43 foot pond in .22 caliber? if so, what parts? A Tungsten hammer? anything else?

Has anyone achived power from this gun, "out of the box"? Is there some magic setting I skipped when I burned $20 worth of pellets? (not a fan of tuning).

I was was curious about the Diana 350 magnum .22 cal. I’m on the fence.
He’s my problem. My buddy (mentor) tells me it will fall apart in no time. Lucky to get 500 rounds through.
Now I’ve got a few Diana’s. Their power increase is notable and this is what my buddy says is the problem.
I got the 460 and found it to have great accuracy as well. My huge problem on the 460 is again plastic especially the front sight.
I’m Super satisfied with my Weihrauchs, Air Arms and FWB’s. Like the variety.
What’s you opionion on the 350 Magnum premium?
Crow