I finally got a house with a nice backyard suited for simple airgunning... I have a clear run out to about 30-40yds from my back window.

In the past I went for compact rigs that were easily concealed for sneaky semi-urban plinking.

I currently have a dream tac w 22cal 300mm barrel and behemoth mod w extra baffle; never properly tuned it, just snuck in some plinking here and there.

Asking all the experts here for their recommendation on the best rig for my range/ setup. I do like shorter setups but not necessarily bullpups, quiet is still king, and i would like to run slugs and pellets... will be plinking and pesting.

Stay with dream tac or no...? If no, what? Panthera mini?

Thanks!

Well, technically not my first, but the first one I want to get serious about. I’ve been shooting pcp airguns for a bunch of years, and now I have the itch to try my hands on a good springer, I’m thinking an hw97, but I’m up for recommendations.

Used 2 times Ulta Pod for sale,works as advertised,smooth operation just not for me and my Maverick with bagrider. $100.00 shipped conus. Great deal for benchrest shooters….

Looking for a

-.25 Veteran either standard or long. Probably prefer long.
-.25 Cricket. Prefer original version not forward cocker
-.25 Uragan maybe?

Let me know what you got.

Looking to possibly trade my mini with custom carbon fiber shroud and mdt folding stock adapter for a 15” 22cal evol.

Let me know what you have.
Thanks for looking.

I was under the impression this product was the go to for cleaning tar like or gummed adhesive off metal surfaces. A respected friend of mine felt very leary about using acetone for this purpose. They preferred using products like "goo-gone" or similar which can be obtained at Home Depot and what not. This is just for my personal knowledge, and, women use acetone on their fingernails to remove polish. Is acetone pretty much for oil based paint/ tar compounds only, like creosote?

must be super fun. and even more fun if someone in the forum is capable to make a 3d printable handle to go diy because almost 200€ for a metal rod and a 3d printed handle is not what i am willing to spend.

New lower price on two in stock .25 Cricket Carbines. These guns will have a full powertune, seven step accurized barrel, foster fitting on the fill probe and a five group 40 yard test target. Each Georgia Airgun will come with a lifetime reseal warranty. For all of the above I am selling each gun for $1,450.oo
Give me a call and I will be happy to talk airguns with you.
Thanks
Charlie Frear, Georgia Airguns
[email protected]
706-884-6707

My hyscore is broke wtb working gun

can anyone help with this? any information about anything related to barrel performanceand/or barrel compatibility is appreciated. thanks!

I was looking into a way to keep a magazine handy on my Marauder. I'm pretty frugal at times, so I have to rely on ingenuity. I just happened to have a magnet lying around and then, it struck me. Could it be this simple? Yes it was!

Open Grove celebrated 3 of our local shooters today for their Gold 1st place Inaugural 50m victory at 2023 WRABF World Cup, Czech Republic. Congratulations to Doug and Vipha Miller and Bob Sofsky. Proud of these folks representing Open Grove, California and United States of America. https://www.wrabf.com/. Thank you to the team sponsors: Airguns of Arizona, Open Grove, N50, and Thomas Air Rifles. Bob's wife made lunch too, thank you.



Magic happens here... TimM & JoeF


USARB and N50 Report
Nice today as usual it got tricky as the day went on. Ray is new and won 25m LV class =). Leon came back for more, Keith's new Thomas is really good. Matt got better. Bob & I fought. Fun day today with the celebration.




Thanks to all that brought goodies.
Thanks to Tim (Mac1) for helping Joe score and bringing good air.
Thank you JoeF for gifting us your facilities and more.

N50: https://www.national50.net/
FB N50: https://www.facebook.com/50National/
USARB: https://www.usairriflebenchrest.com
MAC1: http://www.mac1airgunshop.com

Has anyone used any of the Harrells Precision ring offerings .? I like the fact they have dedicated 11mm & 3/8 sets w/ 60 degree dovetail angle & also a flip side version for either or.
Ive seen a pic of a tm1000 with them but can't find it.
Joe

Up for sale is a like new FX Maverick .22 caliber sniper. Rifle was purchased brand new from Ken Hicks at SPAW and I am the original/only owner. Rifle has only been fired once at the indoor range to sight scope in. The rifle has remained in case unfired since then. Moved across country and no longer shoot air rifles. Price is $1,400 $1,300 shipping included, CONUS only. No trades. Accepted form of payments are money order, Venmo and Zelle. Contact info, email: [email protected], Text preferred: 801-358-5144. More photos are available upon request. Rifle comes with the following accessories as a package deal:

1. FX Maverick Sniper in .22 Caliber with original FX hardcase.
2. Has upgraded Ergo zero angle grip installed and will also include original FX grip.
3. Eaglevision INS 2-piece adjustable scope rings w/case.
4. Saber Tactical Universal picatinney/arca swiss rail.
5. 2 FX standard .22 cal sideshot magazines.
6. 3 cans FX 18.1 grain pellets, 2 cans FX 25.4 grain pellets, 1 can JSB Knockout slugs 25.39 grain and 2 cans JSB Hades pellets 15.89 grains. (Most are unopened/unused)​
7. FX Donny FL moderator with original packaging.​

Hi all, I read a lot about folk sending their springers off for tuning but this usually seems to be USA based guys or companies. I'm in Europe
So I have a couple of questions:
1. Is there a Europe based tuner that provides this kind of mail-order custom "USA" style tuning?

Or, 2. For a non technical person who has *never* taken a gun apart, would I be able to install a kit myself like the TBT kit..or would I be likely to screw it up and ruin my rifle??

All advice and experience
Cheers from CH

Selling a new never used DonnyFL Fatboy Moderator W/DonnyFL Fatboy 2.0 Extension and muzzle break. Asking $235 shipped

selling my gravity rail and TRS Compact ST0035 rail. i would rather sell it as a package but not required. TRS rail is basically new.
If you want both $260 shipped. i accept paypal for payment.

(SOLD)$200 for the TRS rail shipped and $80 for the Gravity rail shipped if sold separate.

since the stock hammer spring is super stiff and adjusting the tension did nothing but make my gun fluctuate up to 24fps between shots, i’ve tried softer springs with a spacer to try to make the tension adjuster work properly. it worked to give me room for a range of 700-775fps with shots differing under 14fps per shot.

i’m sure that, like everyone here, i wanted better.
after deciding to finally cut the original spring( half of a coil from both ends) i end up with 788-795fps spread. this is with the tension adjuster half a turn in from being fully backed out. i haven’t turned it all the way in yet because it’s in a pretty sweet spot right now. i also added a moly greased washer behind the spring between the threaded tension adjuster plug to help smooth out the spring compression and decompression.

now here comes the best part! see that little o-ring in the chamber? i changed it out with a slightly beefier one after feeling a little fart of air on my nose a few times when shooting the gun. after test firing it with the new o-ring… 795,795,793,792,795,795,795,792 FPS!
those last three 795 fps had me thinking my chrono was broken. after using my crosman 1322 which i know is shooting 520-540 fps to confirm that the chrono is not broken.. i brought the notos to the chrono again and 795,795,794. is this what’s considered a tuned airgun is supposed to be like? this is awesome!

the o-ring on the left is the original o-ring inside the chamber and the o-ring on the right is the new one i installed.
sending CPHP 14.3gr

If you know how I can get one, please let me know. Seems unavailable in US. Thanks, Bill and Addi. Text: 503-504-7084, Oregon.

Empire XS in .25 Shoots fine, no leaks. Comes with 2 magazines, fill probe, 1-5x20 scope and rings, and a few o-rings. I'm an old fart and 13 airguns is getting a little excessive. My health isn't the best so this one and a few more are on the way out. Just have to thin a lot of stuff out so it's not such a head ache for my daughter. I've applied 5 or 6 coats of linseed oil to the stock, lightened the hammer and replaced the hammer spring. 25.4 grainers at 725 with 2600 psi in the tube. Can reinstall the stock components if you want. Plenty of positive feedback here.

525.00 shipped and insured in the con us
Now $500.00
View attachment 387843

Video is having issues so I’ll explain here I hope.

-Shooting JSB 18s out of my Crown.
-I shot shot strings and confirmed my average fps at 870.
-Put my chrono at 50y and got my own BC.
-Went to check my dope (in Chairgun) and it was telling me a 1mil drop at 50y at 12X with my AMX reticle.
Here is where it gets confusing…
-I shot a 5 shot group at 50y and they all landed at “Half” mil dot at 50y.
I assumed my BC was off so I retried it 3 times, and triple checked my velocity as well.
-Once I confirmed all my data was correct, I did a trajectory validation on Chairgun. This told me for me to have a “half” mil drop at 50y my muzzle velocity needed to be 933fps.
-At this point I figured screw it let’s try it at 933 for the app and I’ll see what it says to hold for 75y.
- So it told me to hold 2.5mil at 75y and it was dead on…

So I’m perplexed other then maybe double checking my scope height on how I would come up with this data. I have to be missing something I’m sure someone will point out…

PS: I did double check my distances were accurate as well
UPDATE: Scope height is accurate.
-Now looking to assume my distances may be off?

Up for sale is my FX Dreamline Tactical in .25 cal. All the specs can be found on the FX website. Extras include a Huma-Air regulator, 2 aluminum body magazines, 1 stock magazine,fill probe, barrel band, WIKA gauge, FX moderator, power plenum and ergo grip. I am getting rid of this because I recently upgraded to an Impact and the Dreamline won’t get much use moving forward. I would prefer local pickup as shipping these is a pain and very expensive. I am in the Central Valley of California between Sacramento and Fresno. I am willing to meet halfway for delivery if needed. This is a sweet shooter. If you are close to Oakdale and would like to shoot it before you buy it I can make that happen. Scope not included. PayPal ff or cash only. $675.

After a short shooting session in semi auto mode with perfect accuracy, the magazine got jammed with a pellet. Later on magazine does not fit adecuatelly and does not rotate.

Going back to AoA for rapair.

I have for sale a Benjamine Kratos .22Cal with really beautiful wood its in very good condition and it shoots well and holds air . It comes with 2 mags and a single load trayin the box with all the paper work . Price is $475 shipped in CONUS. Can call Greg 540-309-0826 PayPal friends and family pay

I've been shooting airguns as an adult for 25 years now. Mostly plinking, some hunting and I used to shoot benchrest a little bit. I've decided that I'd like to give HFT a try and bought a few field targets to practice with. Right now, the smallest target reducer I have is 5/8" which I've been setting out at various intervals for practice with sticks/bucket, kneeling and off hand. As I understand it, the short game can really throw a wrench in the works so I'd really like to work there (10 to 15 yards). The nearest clubs to me are in Ohio about three hours away and I'll eventually get to one, but until I do what range, target reducer size and positioning should I concentrate on? What’s typical off hand, range and reducer size?