WTS...22 -- .25 moderator $90 shipped 3 day priority..PayPal ff or add the fees..

This is just a feeler but looking to trade my custom Ernest Crown. This was his personal rifle that I bought of him. It has a custom 310mm barrel with a carbon fiber tension system which I than had izzy at donny make a custom end cap to keep it in place so you can keep tension and remove the moderator. It is in a Saber chassis and is a .22. It's currently set up for 17fpe as a backyard buster shooting the hades. I am looking for a evol mini or regular in the same .22 caliber. It can come with a 480cc bottle. Just a feeler but let me know. No scope, and can add the plano hard case for a fee if needed. Any questions feel free to ask. Not sure what i want but open to .22 trades other wise $1600TYD

Did the Epoch Skout just come down In price ? I mean by over $600 , or am I missing something .

Fire Arms seized in a raid.

how good in this guaranty ? does it cover any scope ? posting here because i need a quick answer .

Recently picked up a pre-owned HW30 that's dead nuts accurate, but potentially shooting on the low side. With CPHP's I picked up the following ten FPS readings:
452.1 | 472.4
444.0 | 457.6
421.0 | 465.2
422.2 | 492.4
460.0 | 488.4

Is this a little anemic for the platform?

I just unboxed and inspected these two beauty's that came my way unexpectedly easy (found late one day made contact next day payed and shipped next day)...An SLR98 .22 carbine and an Elinimator .20 cal. both from the original owner with all paper work and documentation, three mags included with the SLR...Both shipped with Leupold vintage EFR scopes 3x9x33 on the SLR and 6.5x20x40 on the Eliminator....that one was removed for shipping...I haven't seen any dings or scratches yet just minor hand polishing on both...just awesome virginal guns still running original tune...nether have ever been run over a crony or opened...The owner insists they haven't lost a thing in 19 years. The original owner said he tried to sell them to some "big airgun companies" who weren't interested in the least...but he found me...and I WAS interested...nice gentleman not in the airgunning community and just wanted someone to take care of his airguns he took such good care of over the years. I just wanted the SLR but after seeing the stock on this Eliminator...WOW!...Guess there is still some good ones out there in the wild yet just have to find 'em...

I have read conflicting reports that slugs work as well or better than pellets with head shots, or that they don't have the penetration ability as a pellet does. Now this may be due to caliber. Possibly a large hollow point at the nose of the slug while great for expansion, not to good for thicker skull. Body shots are undisputed. My curiosity is with limits due to caliber and hollow point size. Obviously a 177 at a large pig is not recommended , just as a 65g slug at 900 FPS is not intended for a chipmunk! LOL! Seriously though, what kind of penetration results have you attained with slugs versus pellet counterparts? I would conduct these tests myself, but I lack a private range.

Hello fellow airgun enthusiasts. I’m debating between the original Uragan .30 and the Uragan 2 in .30. There’s another thread on here of the sort but there wasn’t a lot there. Hoping enough time has gone by that folks have had some experiences with their Uragan 2’s.
Anyone have both the original Uragan and the Uragan 2 (600mm) and can say anything about the performance differences between the two?
I do recall when the Uragan 2 hit the market there was a bit of a supply problem with barrels and I believe there were some complaints about the .30 barrel’s performance. Seems like the rumor was that the .30’s weren’t actually CZ barrels or something...
Has that been resolved?
Am I better off buying the original? I like the plain walnut stocks so the laminate doesn’t really factor in to me anyway.
I have the Uragan King and it has phenomenal accuracy with the 44gr JSB’s. Hoping for more of the same from a single tank Uragan.

Im looking for a basic, even VP model fx crown without a barrel or probe if possible. Used is fine just not modified and beat up. I have my own barrels id like to put into one so no barrel needed or any caliber is welcome. Im looking for cheap here, and I have seen some great deals come thru on great setup crowns with lots of extras.
Thanks

I am selling a MCT Viper Pro 5-30x50 in great condition P/P F/F $275 to your door, I am open for offices all I can say is no 48 state only
No trade at this time I will post pictures soon

Selling my custom prod. Stock from Tom West, larger transfer port, new hammer spring and 16 inch Lothar Walther barrel. Shooting 18 grain JSB pellets around 890 fps. Comes with all the original parts, and a tactical set up from buck rail. Bipod included. Asking 600 obo shipped conus. 3305902221 for more info and pics on request.

You have nightmares about them! The rest of my dream was vague but I clearly remember being handed my old Diana 48. I pull the trigger thinking a pellet was in there. Except there was NO PELLET! No joke I woke up with a feeling of disappointment that I had dry fired my springer.

Hi y'all. I am new to air rifles, I'm a semi auto shotgun user but due to a very short and limited hunting season here in spain on designated hunting grounds, namely october to february and only on thursdays, saturdays, sundays and public holidays, Having permission on quite a lot of private land, and in order to not attract the attention of the authorities I decided to buy an air rifle, I bought a Hatsan 6.35 calibre (.25 in old money) 24 joules breakbarrel, scope, sound moderater etc. In the UK being over the legal limit of 16.7 joules this would require a full firearms licence. Anyway my point, is there any way to 'Tune it up', example get more power from it than the 24 joules it already produces..? It does feel powerful already and can stick a solid open point slug a good inch into a builders plank from around 40 yards, but would just like a bit more from it.

Saw this pop up on the youtube feed today from Alkin USA.
New water trap / muffler drain attachment for the W31.

Link:

AGN Members,

I added a Altaros Regulator from TalonTunes to my Talon SS. I need to readjust Regulator . In order to do this I have to remove it. How do I depessurize the tank? With 2000+ Psi I am a bit edgy on doing this. (AirForce Say's DO NOT dry fire) Loosen explosion disc screw a bit or slowly unscrew Top Hat valve from Regulator til it leaks slowly ?
BTW, Without the regulator I was getting 790-830 FPS Power wheel set at #8. I set the Altaros to 125 BAR now getting 640 FPS. Small change increase (650 FPS) at #10. Another Problem is My YH now shows 3000 Psi and the Talon only 2000 Psi, Altaros 140 BAR. Any knowledge on these questions greatly appreciated.

Bill

Up for sale my LCS Air Arms SK-19 .25. I am the original owner of this and have had a lot of fun with it. I have had no issues with it, and hold air perfectly. The barrel shroud was coated matte black, as I’m not a fan of carbon fiber look. Comes with Donny FL barrel adapter to use a aftermarket, ERGO grip installed, and factory grip. Scope is optional Hawke sidewinder 30SF 4-16x50, Donny Koi is optional
SK-19 $1400
Hawke $400
Koi $100
If all three $1800
No trades at this time. Split shipping within CONTUS. Zelle or PayPal f/f or plus 3%
Message me with any questions or offers

Up for sale is a used SWFA 3-15x42mm FFP scope. Scope itself is in good condition with a bit of rash on the turret edges from being moved in and out of the safe. The optic tracks perfectly and has no issues. It will come with Butler Creek caps and the throw lever that screws into the magnification ring.

Price is $380 and face to face pickup is preferred. I'm located around the Charlotte area and am open to meeting halfway. Shipping will be at buyer's expense. I prefer to deal in Zelle or Paypal.

I have decided to sell my .22 caliber Diana Bandit. I bought it new with the idea to build a custom carbine. Buck Rail had all of the components I wanted to make the transformation so soon after receiving the pistol, I bought the kit to build the carbine. What’s cool about it is that there was no modifications to the pistol other than taking off the original stock and sights, then bolting on the new kit parts. Really simple but made this thing more fun to shoot. After shooting it, I saw that the power curve did not lend itself to accuracy over a string of shots. So I added and Altaros regulator. That made things more consistent and the gun is deadly accurate at 25yds for 20 shots. It is exceptionally light weight (just under 4lbs.) and the perfect close quarters pesting tool you could ask for. It comes as pictured with all of the original components as well as the completed carbine kit. Here’s a list of the cost involved with building this:

Diana Bandit .22 $ 199.00
Buck Rail Lower $ 32.00
Buck Rail Side Folder $ 54.00
Minimalist Butt Stock $ 50.00
Front Rail Handguard $ 20.00
Dovetail to Pic Rail $ 10.00
Reflex Sight $ 32.00
Altaros Regulator $ 99.00
Carm Magazines (2) $ 40.00
Total Build Cost $536.00
Build price does not include original shipping costs on any of these items…
Full disclosure... There is a gouge and a couple of scratches from attempting to remove the moderator base. That is the only blemish.

I’ll let the entire package go for $350.00 shipped CONUS. Drop me a note if you have any questions.

Spent about 3 hours at the dairy farm yesterday. (Sorry! It's 70 and overcast here.) There are two areas I shoot. One is the feed pile where the birds, mostly Starlings now, Eat and poop. At that site I had about 10 dead Starlings and 1 collared dove. The other location was a farmer owned pole and wire that was at the entrance to the barns where there was feed in the trouhgs for the cows to eat.
My Alpha Wolf is DOA so I went to my back up rifles. I used my Daystate Pulsar with a Heli board at power level 4. Chrono says with the .22 Hades ut about 612 FPS. That rifle has a 9 round magazine. I went through 8 magazines and probably missed maybe 25 shots. This is 25yd shooting. At the power level I dropped from 230 bar to 200 bar. The pulsar is close to antique status, but it always hits where you aim it. Even after a long rest period between uses (maybe weeks). You do the math but there won't be as many Starlings breeding next Spring. The farmer reminded me that I shoot em and he takes care of the 'crime scene'. Also got a nice text that thanked me for helping control a costly problem for the farm. Farmeres should be a 'protected species' and we air gunners should help them any way we can.

This is an orchard and garden that I watch over for a friend.

I shot at (and missed) two rabbits while these guys (twins) were roaming around between me and the rabbits at about 50 yards. The rabbits were at about 80 yards. The ATN sets it's zero based upon what the LRF tells it. It reports that info on screen and in the video. The building behind the fawn is about 30 yards past him. I didn't trust the ATN and aimed high expecting the drop would be calculated wrong... nope. Gotta love JSB 15.89 in 20 cal at 28 fpe. Flat like a laser.

Their momma didn't care for the noise but she just kept back a bit, she didn't leave.

I know this has been discussed before, but kinda shocked that adding just a 20cc plenum to my .25 caliber RAW HM1000x gave me 1011 fps with 34 grain JSB's (77 fpe) using OEM spring.
The set-point has always been set at about 150 bar, but w/o the additional plenum ... same set-up maxed out at 930 fps.

The additional plenum had been on another lesser caliber gun, but felt it belonged on the higher powered gun.

Going to lower regulator set-point to about 140 bar with the idea of getting the gun to max out at around 940 fps. Trying to tune to about 910 fps for efficiency/low ES, knowing the gun can generally shoot 1 MOA at said velocity.

So I step outside at the edge of the evening as the air cools a bit to put a few rounds down range. I'm shooting at this Birchwood casey swinging spoons target at 25 yds. I usually shoot for group but I'm bit low on energy these days and I'm gonna be out of light soon. Anyhows. Things r going as expected "7 for 7" when the scopes windage cap fell off the scope. So I put it back on and snugged it up. And I'm thinking, " I wonder if that is going to change my POI". Lo and behold my next shot was a miss. Just to be sure I took another shot. miss. I had to adjust my windage 6-8 clicks to get poi back on target. The scope is a Hawke AMX 2-7 X 32. Do you think that would be the case with all scopes. Just changing the tension on a scope cap.

Selling a RAW hamster I recently aquired. I have a few already and do not need this one.

$175 shipped obo

Call/ text: (NINE16) 5three1-2349

Or email

camsprecisionairguns(@)gmail.com