Good buddy who is thinning his herd of shooting gear gave me a couple sets .... When placing the 1.25" 30mm set onto my vintage .25 WAR Flex it became obvious just how special these ring sets are. Being the inserts Float within the top/bottom ( Main ring & cap ) and the kit comes with 4 various MOA off set inserts allowing PLUS or MINUS 10 to 40 MOA angle correction.
It can be in vertical plane ( Elevation ), Horizontal plane ( Windage ) or any combo in an orbital correction pending insert and where & how placed . Genius !!!

For whatever reason the WAR always shot LEFT on a centered scope & some scopes internally went near adjustment limits in correction.
So with these BURRIS XTR's we place the "0" insert in front position and a +20 moa in the rear having ocular being raised from level. Then put a slight CW rotation on rear insert which moves the scopes Objective to the left slightly, Ocular right. Tighten it down reticle level to bore and go and sight back in ... The windage correction while not perfect was very close so left it alone & turret adjusting it in. With 20 moa of elevation of course it was shooting WAY high which was adjusted to the lower 3rd of range on turret. Now we have more vertical we can dial in for long distance work ... winner winner !!

Again the inserts float until Caps are snugged up locking it all down. Really really slick ring sets !!!

It has a built in compressor ?say it gets 60 shots per charge.I think its 18v.

Selling my evol .30
Rifle is a tack driver. Scope and bipod not included.
$2000
I’ll post more pics this weekend.

Price drop $1700
Final drop in price $1600

It's too darn hot to sit in the woods lately.
I put up the 'gone fishing' sign.
It's not much better but sometimes there's a breeze and sometimes a bite brings dinner.
How are you guys beating the heat besides sitting in AC?

Hawke Sidewinder 6-24x56 SF scope. Comes in its original box with all accessories and manuals etc. It does include a large side wheel and lens covers as well as a sunshade. Scope is in Excellent shape and spent most of its life in the box. Open to trading for an ATN Night Scope. Any questions or need more pics just ask.

350.00 shipped. PayPal F&F or you pay the fee. Venmo, or money order (must be received before shipping the scope).

Looking to trade a DJI Mavic air 2
For a Artemis PP750 in .22
PM me for more info.

Price reduced. Selling Air Arms S410 / .22 cal FAC $500 rifle only / $650 including Bushnell 4-12x40 / Banner SFP scope and RWS I think ( high quality) rings. Magazine included and Faster Brand QD coupler (1/8" MBSPP) to fit the fill valve / Plus shipping. Thank you

I need to downsize, so this package is a ridiculous deal for someone! I have for sale a RTI Prophet 2 Performance. It will come with three barrels, a .177 (currently installed). .22 RPB ($400) and a .22 Long Range barrel ($600) - barrel tool also. Includes .22 probe, extra valve and extra regulator, 0db moderator ($100), Kraford and Lypt bench pad and bag rider ($200), four .22 magazines, one .177 magazine, barrel install tool, Huma rail ($130) and soft case. You can add up the total value, but it is a lot. The only marks are on the shroud. Not sure how they got there, but cosmetic only.

I will take $2300 $1800 $1150 for the whole package, shipped to CONUS.

Headbanger has been upgraded with the 910 Airguns titanium valve seat, but otherwise stock. You will get a 22 cal 380mm barrel kit which will include 1 factory FX magazine and the probe. The barrel on the rifle is a 380mm 25 cal barrel and you will get 1 factory magazine and 1 carm magazine. YOU GET BOTH BARRELS

Rifle loves the 22 cal 18 grain pellets at 870-880 FPS and the 25 cal barrel eats up the 25 grain pellets at about the same speed.

Scope, rings, moderator, bipod are not included.

In the pictures you will see 2 different camo stocks, pick which one you want. I like the less flashy stock because it is not as slippery as the "flashy“ stock.

Headbanger hanging out with a few of it's friends out hunting.

The group was shot with the 25 cal barrel at 50 yards ,5 shots .

$1000.00 shipped PayPal F&F Would trade if the right (Non FX) 177 came along.

Tony P.

Good day,

So my impact m3 is leaking air out of the back of the pin probe where the pellet would be inserted. Im assuming it’s the o rings in the power block. Can anyone confirm or deny?

I am looking to mount a scope on my HW35 springer and it is my first springer so I have some questions.
1. Due to the recoil is it necessary to limit the size and weight of the scope I choose? Currently own a Vortex Crossfire 6-18 X 44 on my pcp that I like but I wonder if I should go smaller and lighter on a springer.
2. It looks like the Sportsmatch rings with the retaining pin are the ones I need and I read recommendations for the TO2C and TO4C, the difference being either single or double screw. Do I need to go with double on a springer.
3. I also want a diopter option and I am looking at the Air Venturi Williams diopter and need to know if it will work with the HW35 front sight.
Thanks for any help.

Decent glass. Illuminated. Looks like Primary Arms replaced it with a newer model. Scratch on the right side of the tube. Also has a blemish on the underside, but that was there when it was new. They're not shown, but the bikini scope cover and microfiber cloth are included. Selling because I bought something a bit lighter. Sold as is.

$130 $120 $110 $100 shipped to the CONUS. PayPal only.

I have sold several rifles lately where buyers elected not to take the optics.

I have several sets of like new Sports Match vertically adjustable 30mm extra high mounts left over for sale.

$35 per pair shipped CONUS via PayPal.

Being a new member has its downfall. One not being able to communicate with members through PM. There were 2 Element Titan scopes in the classified section for a good price (imo) that I missed out on not being able to reply.

how many cu. ft. is this equal to?
is there a conversion chart of some sort? im guessing 18 cu. ft?
thx.

I have purchased the new FX Hunter Compact in .30, my dilemma is trying to find the idea balance for the gun, with its 395mm barrel. My goal is to shoot JSB Exacts 44.75 grain at around 880fps, whilst not causing turbulence to destabilize the pellet & waste air. Which way is best to achieve this speed? Would it be with a higher reg pressure & lower hammer tension, or low reg & high hammer? This is made easier in the Impact as you can use the front valve adjuster to balance the gun, but obviously not on the Panthera?

I heard from Leo Gonzales today (e-mail) about day one of the WFTF Championships in South Africa. He mentioned just a few folks. In springer, Cameron Kerndt shot a 44! That's an amazing score. Well done. Also in springer, both Leo and Ken Huges shot a 36. Paul Cray in PCP shot a 36 as well. Lauren Pearsons shot a 40 in PCP. All these folks are from the US. Scores are out of a possible 50.

I looked on the WFTF web site and no scores are posted yet. If anyone else has any other information, please post it to this thread.

Good luck to all the shooters tomorrow.

Looks like there’s the $300-500 segment, the $700-$1k which are kinda the same but better branding. So what’s a next level solid non-china compressor?

Before you say ec-3000 I just returned mine due to a few different issues and won’t be getting another before I am not fond of the design of all the tubing sitting so close together

So I got a Pelletgauge in .22 a few weeks back and tried to size some pellets. I got a little frustrated with the process and have a question for those with more experience.

When you go to put a pellet in do you go from small to large or large to small?

Also - do you choose the size based on the smallest hole the pellet freely goes through? Reason I ask this is it seems many pellets fit right through one size and when you go down one the pellet 'almost' goes right through freely and will go through easily with just a little wiggle. I'm not sure which one of those two sizes is the right one to choose. Is it based on the actual diameter of the head, or just that the pellet isn't 100% concentric and needs to get past a bump.

Appreciate input from those who size regularly.

Thank you.

Both Sidewinders, the .30 Cal and the .25 Cal have not presented any problem at all.

I have not used them a lot. I have been shooting the Wolverine HP and the Red Wolf, both in .22 Cal, the must.

Each time I take the Sidewinders and make a shot, the really first one hits exactly where I aim at. No matter if it is the first shot after refilling the rifle.

My other PCP's may hit a little bit different on the first two or three shots after refilling.

Now I can say that I do not have any other rifle that match the reliability on accuracy of the two Sidewinders. For hunting purposes, this is an important info.

So I have 3 REX .357s for sale:

1st up is a little carbine that started as a pistol, has now a 14.5" barrel and a rifle tank, will come with the Pistol tank and 10" barrel

500 Bucks plus shipping,.....could leave the scope on too



Next up is an other Mini Carbine with 14.5" barrel,

This gun will come with an extra rifle shroud,
4 Airbolts and a very effective Neil Clauge LDC,........No scope

700 bucks plus shipping





Last one has a 20" barrel

AR forehand, AR open sights and 6 Airbolts


700 bucks plus shipping




I also have one extra tank for 100 bucks ,.......stock grips and stock buttstocks will come with the guns too.

Up for sale is a good condition FX Maverick. Used not as often as I would like, and wife blew the engine in her car so its on the chopping block. Will include many extra projectiles including slugs and pellets in many different weights. Scope can be included for an extra 150, pump included for 200. bipod included. Rifle is 1400.

View attachment silencieux-poweri5.jpg

I am now on my 4th Notos - Two for me and two for family members. I noticed that on one of them the moderator will rotate fairly easily but only very slightly in both directions with a firm stop at each end of the travel. Maybe a total of about 3 degrees? What could be causing that?

I haven't shot it yet but it doesn't seem to be loose as far as bore alignment goes, just that strange circular movement.

All the others did not show any movement of the moderator. So far they all like CPHPs and H&N FTTs, outshooting several of my airguns that I paid a LOT more $$ for.