Question for you guys/girls what would you go with between the 2 a Beeman underlever .22 or the Umarex Notos?? I know they are different in ones a Bullpup and the other a carbine. Just looking for opinions on which to go with?? Thanks

basically new ended up with an extra

$30 tyd

Just recently bought a .177 panther hunter compact. My question is, does anyone know the thread size for the moderator? It it bigger than my wildcat but I can’t find it online.

NLA

From what I can tell air is coming out around the front of the valve stem I have yet to dive into a panthera so I'm wondering if if is just a oring or a bent valve I'm leaning towards the valve being bent because it's the front valve stem leaking

Got this one at 29 yards, 21 grain JST 820 fps, pellet entered one ear and exited the other. For some reason camera failed to record. The longest kill shot so far was 45 yards, that one was with a 15.80 JSB at 850. I am disappointed the video did not work. Oh well, at least I am gaining confidence in this pistol. Hope it cools off, want to go squirrel hunting.

I looked at a few schematics on some electronically fired PCPs and noted some potential around increasing the clock sampling rate of the trigger system microswitch. In looking at high speed footage around barrel harmonics I noticed that adjusting the IC from a .1pF to .05pF harmonics were reduced and POI was more consistent around 890-903FPS +- ~7 FPS. Has anyone also attached not only a chronograph but a logic analyzer to electronic firing mechanisms?

A .05pF ia like $00.03 so in scope of tuning I was curious. I think some of these electronic triggers run on an ARM7 or ESP32 platform.

Thanks for consideration of the above!

WTS Weihrauch HW100 Bullpup Carbine .22 cal. Purchased from Airguns of Arizona new by me on 05.29.2023. No adjustments or modifications to hammer spring, regulator or trigger. Shot less than 30 times. Tested a few pellets and shoots JSB 18.1 grain @ 725 fps ish, JSB 15.9 grain @ 740 fps ish and Predator GTO 11.75 grain @ 870 fps ish. Pellets were not weighed, lubed or sorted and barrel not cleaned.

Airguns of Arizona chronograph shows: JSB 18.1 grain @ 725 fps ish.

Item is mint and holds air. I have not done any long term or comprehensive accuracy or shots per fill testing.

Comes with factory box, papers, comes normally with two (2) 14 shot magazines but I am including a total of four (4) 14 shot factory magazines.

($1,589 for air rifle value if purchased new today + $80 for the two additional factory magazines = $1,669 total value).

$1,200 FIRM, PayPal’d and Shipped to lower 48, friends and family. Not looking for any trades. Only selling because I hardly shoot and any shooting I do I can do with my break barrel. Flawless feedback here under Serdac.

Hello,
Just wondering if anyone is using one of these centrifugal filters and how they like it.
Thanks

Today while my contractor is MIA, I figured I'd do some unsupported seated and offhand shooting from my unfinished porch. Using my two most used guns, I went through almost three 500 tins of pellets. I was shooting a few paper targets at 25 yards for zero and the rest at spinners, beer cans and empty tins. I'd push the cans and tin halves to about 45 yards where they'd turn out of view. It was nice to get back to fun plinking. I surprised myself how well I did offhand after a few hundred rounds . The bench crippled me like a batting tee.

As to the thread title, the small Crossman spinner hung up upright. Doubt I could do that again.

Up for sale is my 2018 Huben with a TJ 222 Barrel work done by Kelly at Krazycool airguns
this gun likes to shoot the MP Bullet the best and would probably like the NSA Huben bullet also
it has a 2016 magazine installed and I think that magazine was the best ever done by Huben and
is very accurate in this airgun.

You can see this TJ 222 barrel shooting at 100 yards and it shoots great I hope this link works down below
if not you can PM me with any questions, selling this one because I have another one with a TJ 222 long barrel
scope and rings are not included shipping is free in the USA. The shooting starts about 4:44

Selling for 1,500.00 dollars firm I paid a lot more for this airgun PayPal friends and family is preferred no trades.

Hi! All I'm a new member and I just bought a Benjamin Gunner and I,m now waiting for a scope I ordered. But my question is about the air compressor a friend gave me that is a new /unused New Warrior compressor from about 2020 (i think). anyway I think there's something missing on the air outlet because its a 14 MM fine thread plug with a small hole in it and I can't figure out how to get anything to fit the 14MM or the small hole that I can connect to my hose that goes to my filter and then to the gun. The comp. is blue ( I think the newer model is red). As I face the front of the comp. the air outlet I'm speaking of is on the right. Any help here would be greatly appreciated Thanks Dan

After attending the most recent Pyramyd AIR Cup, my low power precision FT interests have been rekindled.

I dug out my Steyr LG 110 and took a few shots... damn this thing is sweet! *Neat story about this one.


Unfortunately I've got a slow air leak. I did a quick search here on AGN and found a few threads by @Motorhead & @Xbowsniper (RIP Tom). But I'm unable to locate a list of parts, or methods of disassembly. I found an exploded diagram on Steyr's website of the LG 110's successor, the Challenger Hunter. However there is no parts list. https://www.steyr-sport.com/en/downloads-air-rifles/parts-lists-with-exploded-views

Some of their instructional videos look promising, but lack details

I'm gonna hit it with some "snopes" this evening. If the leak is simple I'd like to try to replace the o-ring(s) myself (hopefully it's not the tiny o-ring inside the regulator!) but I don't even know if I can remove the tube while its under pressure!

Any assistance locating the leak and/or o-rings are appreciated.

-Michael

Good gun, accurate and easy to operate
comes with 2 mags and the original bag of spare O-rings

I have the shroud-LDC adapter on this gun that you don't get from factory.

Shipped in original box for 200 bucks to your door.

Selling my barely shot Weihrauch HW 98 in .22 cal.

I bought this gun new from Krale a couple months ago and have put *maybe* 30 pellets through it. I’ve never owned a more accurate and pleasurable springer. It’s so accurate it almost takes the fun out of plinking… almost. I’m only selling it because my collection has gotten out of hand, and the newest guns need to go first.

**MAJOR DISCLAIMER—PLEASE READ: this gun was advertised on Krale as having the traditional HW 98 stock with the black stippling. It was a gorgeous design that clinched the deal for me over all the other amazing offerings from Weihrauch. However, when it arrived, it had instead the new stock, without the black paint. I was very disappointed, and in a fit of rage and inspiration I painted it myself to match the original design. Now I’m sure some of you are screaming: “You fool!!! What have you done?!?!” But in my defense, it came out looking really good (see pictures) and, after having spoken to a few people who have ordered the same gun recently from various retailers, they are ALL advertising the original stock and then sending the newer, less attractive stock. So it might be hard to find the black stippled versions otherwise. Either way, it goes without saying that the gun shoots just the same—which is to say excellently.

$500 plus shipping in CONUS. Zelle preferred. The only trade I’m interested in is a .22 or .25 Sumatra carbine.

Comes with original box and manual. ***Scope and mount not included.

Thanks.

It’s been a really long time since I’ve shot FT…but sat down in no coat wftf position and shot this N50 card at 27y. It’s not terrible for a 12fpe gun. Missed a few wind holds, but would probably still make a 244 or 245 on the wrabf 25m card. I did walk around like a 100 year old man for 10 minutes or so afterward.

anyone own one ?? How many hours can be expected from one? Is the coalescing filter on it enough by itself for producing dry air ?

Mr. @DeadEyeNC Hepler and wife are always a force to be reckoned with. Shown here at the Pyramyd AIR cup 2023 where Philip took 2nd place in the HFT division.


Philip uses a Daystate Redwolf and shoots for the Daystate Wolfpack.

Hey guys. I got this bad boy used maybe 2 years ago. It just sprung a leak "inside" somewhere.

What would someone do in this situation? Do I contact FX and send it to them? or do random FX dealers fix guns? It came from Talon Tunes originaly.

Where do I send it?

Thanks

The XTi-50’s have landed! And they look niiiiiice. Spotted at the Pyramyd AIR cup 2023. AGN member @coldfield on the right.

Dug out some targets, set some up in the garage, some family came over, and we did this to the targets

All prices include shipping within CONUS. I only take PayPal F&F or Venmo. Items will be shipped via USPS priority mail.


___Leshiy Classic Accessories___

Rustem Extra Airtube - $175 SOLD
Double your shot count! Works great, never had a leak. They don’t make these anymore and this one came directly from Russia. You won’t see another one for sale any time soon.



Huma .22 Pellet Dispenser - $50 Sold

Huma .25 Pellet Dispenser - $50 Sold


DonnyFL Extended moderator insert + Tube extension - $50
Quiet down your Leshiy with this longer baffle insert and tube extension.


All prices include shipping within CONUS. I only take PayPal F&F or Venmo. Items will be shipped via USPS priority mail. I usually get things shipped same day or next day.

More pictures available on request.

So I was watching Ted’s video on the Panthera Hunter. Being new to this hobbie/ sport, i am not really sure who he is, but seems to be a player when it comes to FX and what not. So during the video he talks about how FX told him the hunter is not a slug shooter. I was looking at the specs on the FX sight and noticed what they were advertising-

My point being, why are they advertising it as a slug potential shooter when according to Ted, they supposedly clearly told him it isn’t that type of gun. And to be dead honest, Ted found that the potential for slugs really only made sense at 900fps.
Hopefully FX is not over advertising their product. I wouldn’t want to have much to do with them if this is the case, but hey, what do I know or understand being new. Thoughts?

My new uragan 2 700mm in caliber .22 has arrived. It came with a thicker bottle and without the bottom protector. Has anyone seen this? Has anything else changed?

Have 4 rifles im looking to sell.
Kral Big Horn .30 with custom made 1/2-20 adapter and all stock parts - $350 - SOLD

Air Venturi Avenger .177 with single shot tray and one mag, Donny FL adapter - $250

Benjamin Kratos .22 with 4 mags and an adjustable hammer spring and adjuster installed. - $450 SOLD

Benjamin Marauder .177 w/ Lothar Walther barrel. Very little use. Has notch cut for tuning. $475

Athlon Argos BTR MIL 6-24x50 scope $250 SOLD

Shipping from Cincy OH