Selling my Dream Pup .25. 600mm. Great gun, super accurate and no leaks! Has a Aeron 20MOA pic rail for the scope, a pic rail for a bipod and a Fab Defense butt pad with mono pod. Also has aFX barrel band with cheep Amazon bipod and Discovery HD 4-20x50 FFP scope. Gun tuned at 889fps with Hades at 47 shots from a 230bar fill down to reg pressure about 125bar. Also comes with 1mag and eagle vision fill probe.$850 for everything Shipped CONUS, PayPal for payment. Feel free to reach out with any questions. Thanks for looking! Ed...

Moving on to other disciplines. Shoots as new Martin built ,sold by southern air . Shot very little. matches too far away
Been a safe queen since Covid , several sealed tins pellets. Shot only tethered on the bench Scope is not included $ 1600.00 text 520 977-0710

Lightly used 580cc bottle with m3 valve
200 shipped tyd CONUS...paypal f+f

I’m in the market for a pcp rifle. Trying to find out what would be a good start with a pcp. I like the looks of the fx Dreamline series. let me know what you all think?

I have for sale like new condition Donny suppresses and shroud kit for Leshiy 2.
I will take Zelle or PayPal F&F.

All asking prices are also O.B.O.

• Also have a Edgun Leshiy 2 shroud kit $45 shipped.

Pictures

Wondering about the male end of my 0DB that came with BRK Atomic XR. I'm new to the PCP world so please excuse my ignorance. I see all moderators come with a female end. My 110C has a male end. I assume it's removable. If so, how is it removed? I tried unscrewing it, but no go. Couldn't find much with my initial searching. If someone can enlighten me, that'd be really helpful.

Hello
in iran we have great news for benchrest with prophet airgun. but tuners like reza hoseinnejad work hard to get best record with this gun.
here is records for 50 m.











The first, second and third people of the competition shot with the same gun.



248 score is top level for airgun at 50m.


they are bought rti prophet2 it was very bad gun for benchrest .. rti barrel just love some 25gr rd.also regulator of rti was not very good ...so in first match they failed with prophet.

they decide to put fx liner on prophet with 1:24 twist rate 800mm and also they replaced rti regulator with one regulator that made in iran . also they changed many parts of this gun to be perfect.... like hammer spring.. valve seat...pellet probe....
also they shoot one slug that made in iran and it works very very good on fx barrel. (ZRN Slug)



the results after hard working on rti was amazing . now they have iran record 100m-75 yard-50 m.

Congratulations to our friends in Iran .

If you have any questions about this, you can ask

Looking at something on fleabay. Seller has ok ratings, but more concerned about getting hit with outrageous customs/import fees. Anyone here ordered anything from India if so what were the fees like? The online fee calculator is just so confusing to understand.

Hello everyone and thanks for allowing me to join the forum. I’m pretty excited to get going with my first real air rifle. My last one was a pump daisy about 30 years ago . It’s an Impact in .22 (600mm). I am told I will most likely need a heavy slug liner to shoot slugs well, but I want to give the stock rifle a shot with slugs first. Nick at Nielson Specialty Ammo gave me a handful of lighter weight slugs to try (his shop is about 15 mins down the road, so super convenient… plus he and his family are super helpful and all around great people). He gave me some 20.2 grainers in .217 and some 23.0 grainers in .216 and .217. I can’t wait to get a full understanding of tuning this rifle. It seems like it’s very user friendly and versatile. I will gladly accept any tips or tricks you may have for me, or pitfalls to avoid. Thanks again!!

Dumb question, but I was wondering how to post to classifieds. Do I need to wait a certain amount of time or have a certain number of posts? New to using forums, usually just use Facebook. I just need a place to sell an airgun.

Thanks.

Lightly used, like new Huben k1 .25 caliber. Synthetic stock. Less than 300 rounds only from a bench No issues. No reg creep. No leaks. Any questions ask. Video and more pictures available if needed.
$1,300 shipped.

*** I have 3 guns listed. I want to get another rig. When 1 sells, I will remove and keep the other 2. If interested, let me know or it may be gone.

I picked up 4 Sheridans today , that are in various states of disrepair. I need help with one trying to get a general idea year of build, it has no serial #, the other 3 do. The closeups are of the one I'm trying Id. There is 1SS, 1BS, 1 silver C series and 1 C series. All the stocks looked like the 1 before I cleaned them. The silver C works and the one I'm trying to Id

Hi,
I can not stop myself wanting a electronic PCP, i have asked a few questions on Epoch threads as i only really hunt having said that i,m lucky enough to have recently set up my own range on my property from 50-120 yds, I,m interested in both rifles but struggling to decide on which one, Prices are similar and i only shoot slugs at this moment but that could change but as said prob be around 80% hunting/ play shooting and 20% trying to improve my skills target shooting,
I really enjoy long distance shooting again on my own land as i find it challenging play shooting oranges at 200yds plus and could do with some advice which rifle would suit best, i have taken a good few rabbits at this distance too,
any advice good or bad welcome..

I received a new rifle yesterday and want to sight it in out to fifty yards as that’s my self imposed limit, and pretty much the farthest my hunting area would allow because of trees and vegetation.
My desire is to zero the rifle so I just have come ups where all my distance variations from reticle center would be below the horizontal of the reticle. I don’t dial when pesting because I could to easily forget to dial (short attention span). I LRF my prey and then use come up dope.
The caliber is .30 at 848fps, 44.75 JSB Exact.
Appreciate any help on what’s the best way of going about that task.

$1,675 Shipped
For sale is a FX Impact M3 .22 700mm sniper model. It’s an early 2022 model with an unbranded power block. Comes with gun, case, magazine, and fill probe. Like-new condition. Not interested in trades.
Thanks for looking - Rich

Are L/W slug barrels available for the HM 1000x if so what twist rate and how much Pain$!! Cheers Malcolm Black Powder . In au.

Just got a used crown mark 2 30 cal with 600 mms barrel. Wanting to shoot hybrids 44.5 in it at close to 900 fps that I can get. I read that 160 bar is max pressure. Is that true? I also read that Earnest Roe tuned the crown to 170 bar. What do you recommend.....Thanks...

So my goal for today was to make a video detailing how I make a TX200 guide out of acetal on a mini lathe. I spent the better part of the afternoon making this video only to discover during editing that all of my source material for the second half had no audio. Why you ask? Because I am dumb and forgot to charge my wireless mic. Now you may ask, "But Jon, why wouldn't you check your work as you went so you could catch things like this?" Well my answer to you would be the same as before. Because I am a dumb dumb.

Anyway, this is basically how I go about making the actual guide portion of the guide. If you would like I can upload the audio-less second half but OH MY GOSH is 15 minutes of video without audio hard to watch. I tried adding audio over it but that was way too much work trying to remember why my hands were doing this and that and honestly trying to make lathe noises by mouth is not easy and I started getting dizzy from the constant screeching. Lessons were learned.

Any who, here is my beginner guide. If you are not a beginner or notice something I can/should do differently, I am more than open to critiques here. Honestly I would appreciate them because I have zero formal training and am basically winging it.


Sorry for the poor audio by the way. It was my first attempt at any sort of real video and definitely need to work on how I record the audio especially when dealing with background noise. Live and learn!

As a final thought, I likely would have done this guide as a single piece in the future. I was mostly experimenting with re-using the factory base on my own guide and the only way to learn new things is to try new things. I will see how this setup holds up with time and go from there.

Here is a screanshot from my audio-less video that shows the completed main guide:



A top hat was also made and added after this but I don't really have any good pictures of it.

The barrel that came with Delta Wolf is 1:20" twist rate. Its slightly chocked. Apparently very well finished. Doesn't shoot 18.13 grain or 25 grain jsb redesigned at any fps accurately.

For someone I have also tried installing this barrel on a free floating barrel gun but no good accuracy.

As a last attempt I going to make the barrel a bit more choked.

When I push a pellet through the barrel, there appears no issues in barrel rather the barrel is Apparently excellent but without accuracy .

It will take time as my machinist is busy. But I shall develop more choke in it and then test it.

I have some hope that it will perform.

Please comment.

Bhaur

goldfish

Selling FX IMPACT M3 700MM .22 call

Comes with Tensioned barrel kit + factory shroud ( fx moderator some dents on it ) and fx slug liner included

no scope no bipod no extended rail just the gun as came from the factory


NO leak stays charged forever

shoot H&N 27gr slugs 989 fps 1 hole 50 yards


I'm in Houston Texas and prefer local pickup. You can test the gun before you buy


price 1500 shipped

Video on YouTube

Fx dynamic 30cal 500mm. Bottle upfront, K&l buffer tube adapter, AR stock, 3 mags. Stock rail n parts, $1450 shipped UPS with signature confirmation. Paypal F/F or you add fees........... No bottle clamp or Scope!!!!!

I'm brand new to learning about PCPs. It's overwhelming. Can anyone recommend a good semi auto PCP for coyote hunting? Thanks!

A problem popped up today. After about 40 shots the cocking lever became really stiff. I found the shuttle screw in the front of the cocking lever had backed out. Tightened that up and all was well.

But before I found that, I tried to remove the barrel to see what was up with the shuttle/lever. I cannot get the barrel out. It seems like the ratchet won’t completely release. I’ve tried several times. It won’t come out. I tried to remove the ratchet thumb screw but I can’t that out. I hate to put a pliers on it and force it and scarring it up.

Has anyone ran into this? Any ideas?

Brian