This is a "Spooky" 17 Caliber Carbon Fiber moderator. The internals are gyroid printed PETG.
This moderator performs best at muzzle energies between 15 and 40 foot pounds.

$45.00 to your door.

Specs:
Length: 100mm (~4 in)
Diameter: 24mm (~1 in)
Weight: 1.15 oz (33 grams)
1/2 x 20 UNF stainless helicoil




Audio was recorded of the bare rifle and the rifle with the moderator.
Here is that sound sample repeated three times.

The microphone is about ten feet further from the bullet trap than it is from the rifle muzzle. The sound of the pellet striking the trap is much louder than the rifle.

Analysis in "Audacity" shows that the net reduction is 11 decibels. That is a net reduction in detectable range of about 350%.

This chart explains that claim:

SOLD PENDING FUNDS. I have an Airmaks Krait X .25 for sale or trade in excellent condition. It has been upgraded to a Huma Reg, no creep, looking for a bench rest rifle, Panthera, Dynamic, Raw hmx, other quality rifles as well.
Any additional pics available upon request.

Just as stated above, this is a custom cerakoted prophet performance 2
It is set up to shoot .217 knock outs at 940 right now with the 600mm RBP barrel
What it comes with:
177 LW barrel with probe, shroud and end cap, Ammo for days, the tin with the polymag sticker has 3.5 tins of .177 polymags, 4 tins of .177 knock outs-2 10 grain, 2 13 grain, and partial boxes of NSA 20.2 and 12.5, 2.5 tins of .217s, a carbon fiber bipod, 4-16 element helix with no limit rings, 4 Orion 22 mags and a single shot loader, and two .177 magazines, a 1350 impulse air moderator with cover, tacticam video camera and a brush hog bottle cover.
Asking $1300 for the lot, or best offer
Sorry, no trades at this time.
Posted on AGW as well

If you have any questions or need more please feel free to message me, or text me for faster response
o-5 five six, niner

Selling an Artemis PP750 .22CAL. multi shot. Included 4 magazines(2 factory & 2 Carms), set of wood grips, extra o-rings, LDC adapter, Scope rail extension, Huma Regulator. Asking $250 shipped. Accept PayPal friends and family or USPS m.o.

Bought it from a member on here. Shot it twice and i just don't have any time for it anymore. Comes with the UTG scope that is on there. Small crack on side but nothing that effects performance.

Up for sale are some miscellaneous air gun parts. All prices are for the item only. Shipping will be additional and I will combine shipping on items if feasible.

2 x complete Rat Works aluminum HW100 cylinder 340mm OAL, like new condition $185 $170 each 1 sold to blackdiesel

1 x Rat Works aluminum cylinder for HW100, 340 OAL, no end pieces, just the tube, like new condition $125

1 x 600mm .177 HW100 threaded barrel $145 SOLD TO DrPutz

1 x 410mm .22 HW100 threaded barrel $115

1 x FX bottle valve $40 (I have been told by various members that these will not work on the newer FX rifles. I can provide more pictures if interested.)

1 x Weihrauch .22 single shot loader for HW100 $40

1 x Altaros .15L aluminum cylinder for AA or CZ S200 rifle and variants, never used $70

1 x cylinder end removal tool with two pins for AA or CZ S200 rifle and variants $20

1 x Rowan Engineering Air Arms TX200 Cocking Lever Grip, silver $30 SOLD

1 x Custom Air Seals gas ram for Gamo Accu, new never used $60

1 x Weihrauch HW100 synthetic black stock $225

1 x ARH Air Arms TX200, never used, cocking shoe $30 Sold to SilverStreak

Prices listed above are for just the part. Shipping and insurance is additional. Payment will be via USPS money order, Zelle or PayPal. If you elect to pay via goods and services please add the fees too. Continental U.S. only. In case my pricing is way off, I will entertain reasonable offers. Low ball offers will be ignored.

Thanks,

Taso

……Target practice

JTS Airacuda Max shooting 16gr JTS pellets and getting an honest 1/2 inch group at 75 yds.How the heck can they do it?

NLA

I was playing around this weekend and did some thinking...when is the last time I shot an airgun not a GK1.

It's been a bit...I looked at the Panthera a couple weeks ago. De-cased it and wiped it down...thought about shooting it...grabbed a GK1 instead...manically laughed as I emptied a whole magazine into a piece of steel at 50y. Yesterday, wanted to shoot the kyl I have at 35y...grabbed a GK1 that I threw an immersive optics on instead and had way too much fun. Then since the sun was hitting the kyl, pulled out the thermal GK1 and plinked away.

Yeah...this air 'pistol' has ruined other airguns for me...

I know I'm not the only person this PCP has ruined

Hello AGN'ers!

I recently fell into a few oldish Sheridan, 5mm pumpers that needed some work. They are easy enough to work on and fix via the available reseal kits from a few vendors.
However, those kits seem to be expensive (± $30 each) for what is included: a couple of springs, a couple of small gaskets, a flat piece of plastic called a check valve, new poppet and a new air tube pump seal.
I did a search for some of these parts on the McMaster Carr site and was not able to find the parts there, likely because I'm unsure of what exactly they are called/named.
Have any of you tried of found another way to buy a Make yer Own reseal kit for these Sheridan's please? They must be available somewhere, how else do these vendors acquire them to sell?

Mike

Hi all, would like to introduce myself here. A 43yo gun enthusiast here, fortunately living in a very safe and peaceful country in South East Asia (Indonesia) so gun ownership is highly regulated here. Firearm/powder burner mandates 6 months waiting period with 0.32 being the maximum caliber allowed and for airgun .177 being the most common with .22 the max allowed.

I have some tough rats and predatory lizards constantly roaming my farm at night and I just bought an FX M3 to handle my pests problem (just an excuse really). It’s a 700mm sniper spec with plenum and power block dumbed down to .177 with dual port and tensioned barrel. Very keen to learn into detail about tuning the riffle and I purposedly chose an M3 because I am a tinkerer by nature. Hope I can learn and contribute something here!!

Cheers!!

Uwiik

This was the base model about 8 years ago when I bought it. Doesn't talk with your phone, comes with a battery. I used 3 or 4 times a year to check on speeds to use for my Chairgun Pro ap. It works but is sensitive to the right amount of light. Selling because my brother just gave me a Garmin Xero for my Bday. $50.00 including shipping CONUSA PayPal F&F only.

Can anyone please tell me if there is a company or a custom builder who would be willing to make a big bore in caliber .72 or .95. I know all about AEA but I am looking for something American made.

Got my new stoeger xm1 bullshark aka snowpeak p35 the other day. First thing I noticed was this gun is very very inconsistent

Checked the hammer (factory oil was very sticky) cleaned off the factory oil still very inconsistent.
So I decided to take the whole thing apart which is very easy to do just a single bleed screw.
I found the regulator was cover with silicone grease. Cleaned those off the reg and lowered the regulator setting a bit.
This is what I am getting after. Had to lower the hammer spring as well to hit that 900fps magic number with JSB 18.13gr.

8 shots group at 25 yards

My rifle is an FX Impact M3 700mm sniper spec with plenum, power block, tensioned barrel and dual port dumbed down to .177 caliber. I am pretty much limited to .177 here in my country, so I naturally want to shoot the heaviest slug in .177 for maximum damage when hunting for pests in my farm.

I have had good success in tuning for NSA .178/15gr slugs, easily adjust between 900-1050 fps, reg at 100 bar, macro 13, micro 3.5, valve 3.5-4 lines, very efficient air use, nice one dime grouping at 25 yards. However, for the life of me I can’t get good velocity with the heavier NSA .178/20.5gr slugs. The absolute max velocity I could get was 850 fps and I had to max out everything to get it with reg at 135 bar, macro 16, micro 5 and valve fully maxed out, even a slight reduction on setting would drop it drastically to lame 600-700 fps and it consumes air like a leaking balloon…

What can I do? I am targetting 925 ish fps. I asked the shop and he suggested changing hammer to tungsten and spring too but I am not convinced because as far as I know much heavier tungsten wants 170 bar on reg and there is no way I need 170 bar just to launch a puny .177 / 20.5 grain slug to a proper velocity… Currently I am far far away from maxed out shooting 15gr at proper velocity, there is no way I need to upgrade to tungsten just for 5gr heavier slugs?? Maybe I just missed something??

Please advise and thank you very much in advance!!

I just received my new @Airgun-Revisions .177 P-Rod FT. Words couldn’t describe how cool this thing is. I have my Bushnell Match Pro on for now. I need to 3D print a nautilus wheel and pointer and then it’s off to the range to work on my distances.

What distance do you start your zero point at?

I have couple air guns I wanna sell I have pbba 45. 750 shipped
I have airforce condor 400$ its the SS shipped
I have will piatt 45 light hunter sale for 525$ shipped

Looking to move my M3.
Come with 2 magazines
IA moderator
ST bag rider
Digital guage
K&L adjustable cheek riser
ST Arca rail
Barrel tuner
CF liner
And the Fx hard case
tuned to shoot pellets

$1700 shipped in the lower 48.
NO trades at this time
PP +3.5%, PP F&F, Venmo , usps cashier check-shipped upon clearing.

brand new rifle has barrle needs crowned and threaded went from 24 inch barrle to 18 inch makeing it a carbean air tube has been shortened 7 inchs comes with mag and and factory ldc holds air good

This came on a Cricket Mini Carbine that I traded for that did not have a shroud on it - see pictures below. I put a shroud and a Donny FL on it and have no use for this.
The adapter screwed on to the end of the barrel where the new shroud does now. $60.00 including shipping PayPal F&F only.

1600 shipped Possible trades quality bigger bore .30 up.
Like new mk 2 impact .35 800 mm with 2 ,18 round mags,Saber Tactical rail,UtG bipod ,And original padded hard case.

Has anyone used this compressor?
Each time I fill cylinder (200 bar), when I try to remove the cylinder (un screw) it damages the threads of cylinder as it hold it under pressure. Am I using it wrong? Or do I need a relief valve or something installed?

If I unscrew the black knob, it drains air from the cylinder.



The cylinder I use comes from Hammerli AP40. Picture attached.



There is no valve between the cylinder and this compressor. I have a coupling between the compressor filter holder and an adapter. The coupling then connects to an adapter that connects to the cylinder. Picture of the coupling attached.


Picture of the adapter. The cylinder fits to this.

r

Have been looking at a few different rifles for NRL22 shooting and shooting in general. I have a few I have been looking at and watching some rifles, the Epic Two the Karma Red Panda. But the thought of an American made rifle is intriguing to say the least. That and being as I already have an original Rapid Mkii as well as a Dawson Rapid I figure I could grow the family.

This has me thinking about a 22 rifle to shoot slugs for both hunting and match shooting. That leads me to the first question...will the Hm1000x shoot slugs accurately enough to hold 1 MOA at 100 yards? If you can't hold close to this using it for a match is a waste of time.

The other question are to those that have the MPA chassis. How well do you like it, and how well does it fit the gun?

Last one...when shooting actual NRL22 matches, how do you find the rifle fitting in some of the barricades used?

Thanks guys