How many of you have converted a co2 gun over to pcp via a safepac? I've had a few 2240s, but I decided to toss one in the 2260 shorty I built. I had the maker cut the end down to 1/2" so it just looks like a fill cap on the end. I get about 14 shots at 525-550 fps with FTTs. It only has a 12" Prod barrel in there, so that's why the velocity is low. It stacks the 5.53mm FTTs at 20 yards so that's all I ask of it. Already smacked 2 starlings this morning with it.



I also had to tap the transfer port with an 8-32 set screw and drill that out to 3/32" to get a stable shot string. Otherwise it was in the 700s for a couple shots and then fell off like a rock.

I do have a discovery valve set I will eventually put in the gun to get more power and shots, but it's so quiet at 10 fpe that I might leave it. The trigger is stiff though, since the spring is a .045" wire and cranked to the max. Cocking is stiff too. That'd be corrected with the Disco valves. Only running such high pressure to get the shot count up.

***SOLD***
Final price; $600/ + Shipping.

Diana 65 rebuilt by David Slade . Bluing is in very good condition, wood has a classic oil finish with a few handling marks, and the original recoil pad is decomposing as most other Diana's do. Shoots to spec and accuracy rivals my FWB-300SU..
Comes with factory sights and will be shipped in a hard case and cardboard box.
Accepting uspmo or personal check/ships when money clears the bank.
$650/+ shipping. No trades, price is firm.

Used Ninja 77 c.i., 4500 psi fill station. tank in excellent condition with new, unregulated Ninja EZ valve $250 $225 shipped

no trades… did i mention no trades?

So I’m gonna start my own testing in 25 cal, shooting slugs at 900+ FPS.

The reason I ask is because I’ve watched a fair bit of the RMAC videos and the North Eastern Airgun Comp. From what I can tell, the guys shooting bench test competitions are still shooting with the factory shroud.

I would suspect that in a competition where sound doesn’t matter; why are they all using the factory impact shroud over the tensioner?

I have both so gonna try them out both to see what I find.

Feedback is welcome.

.

Selling my .22 HW100KT. It's in dang near perfect shape. No modifications of any kind. Walnut thumbhole stock w/no dents that I can find. All metal is perfect. No leaks.
Comes with two factory 14rnd mags, 2 piece factory fill probe, smaller fill probe from Huma, tools to disassemble the air cylinder and the owners manual.
It is very accurate with JSB & FX 15.89 pellets @ about 870 fps.
$857 shipped anywhere in the U.S.

Question for you guys. I recently sold a gun on here to another member. He reached out and said the gun won't hold air and blows back out the fill valve. I only filled it twice while I had it but it worked fine. He even told me it showed up full of air. He wanted his money back and is sending it back to me because he doesn't want a "project". I sent him his money.
My son is sort of chewing me out saying it was sent in working order and there isn't a warranty on used guns here. He might be inclined not to refund the money. I sort of feel the same way but went ahead with the refund. What say you??

Thanks, Scott

I have $750 from a gun sale that I am probably devoting for a new springer. I have a 3x12x44 UTG scope already. I need the airgun to be high quality without any tinkering needed on my part. Does the HW 30 fit that bill? Should I go ahead and have AOA put a vortex spring in it so internal problems should be reduced? Any benefit with more power or smoothness in recoil with the Vortex spring in a HW 30? Debating between HW 30 Urban Pro at $589.99 or the HW 30 Deluxe for $373.99. Is the Urban Pro that much more quieter than a HW 30? The Urban Pro 4X scope is of little use to me so the HW 30 Deluxe scores points there as I can use my UTG scope. Last, if I go PCP, what is the most accurate say to 50 yards, no tinkering PCP that I can get for my budget that will work well with a hand pump.

Selling my red prophet .177 compact. It’s a great shooter and quiet. Currently shooting zan 13gr slugs. Has some wear marks. Comes with everything pictured plus a nice hard case. Not looking to separate. $1100 shipped to the lower $48

Up for sale is a Daystate MK4 22 cal this gun has been highly modified by Allen Zanley and is in perfect condition
there's not a mark on it like new , the gun has a AZ shrouded barrel and has a AZ hand selected barrel this has
been lots of work done to it the crown and lead and polished by AZ the block riser was done by AZ also .
the gun has been tuned by Motor Head and is a pleasure to shoot , Scope rings an scope wheel are not included .

Asking 1,500.00 dollars shipped to you , there was 1,400 dollars just in extra work done to this gun .
Can do PayPal G&S or FF if your good with that also can do Zelle and Venmo , if more pics are needed please ask .

For sale: Air Arms .177 S500 XS FAC Carbine with walnut stock and Aeron FT chassis.

Gun with walnut stock purchased in 2023 from Pyramydair. Chassis and its accessories purchased from Utah Airguns.

Fitted with Aeron FT chassis for use in Field Target. Never used with walnut stock. Walnut stock not oiled.

Air fill switched from T-bar to foster using BEST Fittings conversion kit.

Gun is in excellent condition other than a minor rub mark on the chassis cheek rest (see picture) and scope rail marks on the dovetail of the S500 (see picture).

Extremely accurate. Very consistent muzzle FPS (see shot string graph).


Performs very well in Field Target; has won Hunter PCP at our club. Selling only because I can shoot offhand slightly better with my Daystate Pulsar. The S500 prefers FX 10.3s.

Sale includes the S500 with walnut stock and Aeron chassis. Also:

• Aeron picatinny scope rail (scope and rings not included)
• Aeron chassis weights
• Rowan engineering adjustable trigger blade (not installed)
• Original T-bar filler
• Donny FL shroud adapter to use ½x20 UNF accessories. This adapter is installed on gun; picture is of the OEM muzzle end shroud plug (moderator not included)
• Huma-Air AA500 valve removal tool (not used)
• Spare o-rings
• Original manual

Original cost of everything was $2,150 ($2,350 including taxes and shipping).

Price: $1,200 delivered to continental US. Will ship the gun in the original packaging.

You can pay with Zelle or PayPal F&F.

Relevant links:

https://www.pyramydair.com/product/air-arms-s500-xs-fac-carbine-walnut?m=5628#11430

https://utahairguns.com/product/aeron-cz-ft-chassis-only-air-arms-s4xx-5xx-ft/

https://aeron.cz/air-arms-s4xx-5xx-ft-stock/





---
---
---
---
---
---
---
Set up for FT. Scope, rings, and moderator not included

Fx panthera 25cal 700mm barrel comes with a

Kraford and lypt front rail
Donnyfl Yokozuna suppressor
Saber tactical bag rider
Huma front bottle adapter
700cc bottle
Huma pin probe
Huma regulator
3 fx magazines
1 single shot tray
Carbon fiber barrel sleeve
Original Amp regulator
Tungsten hammer
Original hammer
Heavy hammer
1 box of altaros queen 60gr
Original fx Hardcase

Excellent gun with minor scratches shoots altaros 60gr queens at 900 fps for 108fpe can consistently get sub moa groups even in Heavy wind at 100yds and will also get Excellent accuracy out to 200 300 and even 400yds!

$1900 shipped Feel free to text with any questions or inquiries my number is 419-349-8376 the last 2 pictures are the last 5 shot groups I shot with this gun in the wind at 100yds

Fx impact m3 25cal comes with
800mm tensioned superior heavy liner
Slug power kit with pin probe
Saber tactical bag rider
Saber tactical arca/pic rail
Saber tactical bottle clamp
Air marksman backbone rail
700cc bottle
2 25 shot magazines
Angled fill probe adapter
1 box of altaros 50gr smooths

This gun shoots the 50gr altaros at 886 fps for pristine accuracy from 50yds all the way out to 300 and 400 yds! As well as consistent sub moa groups at 100yds even in lots of wind. Very impressive gun setup tuned to perfection. Also a few minor scratches. $1600 plus free shipping feel free to text with any questions or inquiries my number is 419-349-8376
Also check my previous threads for more info on how incredible this gun with those slugs are in the wind an out to long distance

Optional items are a

Arken sh4 gen 2 4-16x44 ffp moa extra $200

donny fl sumo $125

more altaros 50gr smooths available $23 each

Very nice rolling hard case very tough and fully waterproof $100

Also an ajolite uuq bipod very sturdy one hand operation $60

For sale is a BSA Superstar underlever in .22 cal. The rifle is in overall good shape with a some rust freckling on the finish of the barrel, cocking lever, and less so but slightly on the compression tube. The scope railing shows marring. The stock is in good condition as well with only a few scratches and dings, but no large dents, cracks, or chips. The rifle functions perfectly and shoots very hard.

This was a European imported example and exhibits an "F" inside of a pentagon marking indicating produces less than 7.5 joules of muzzle energy (or 5.5 foot pounds). Asking $350 shipped.

Very nice condition Chinese BAM B40 clone of the Air Arms TX200 for sale. In .177 cal. This rifle is in excellent condition with near perfect bluing except for a few light scratches on the barrel and rubbing on the scope mount grooves. The stock is in equally great shape with no noticeable scratches or dents. Functions perfectly and shoots well. Asking $300 shipped.

.

Hi! I'm currently working on a paper chronograph called SpeedShot for all those airgunners out there who don't own a chronograph (like me) or who don't want to drag out the chrony to the range every time.

That being said, I need some willing participants to give feedback on my paper chronograph targets. I've done all the nerdy math to figure out exactly where the pellet should strike given a muzzle velocity.

Essentially, the end user would zero their rifle/pistol at a range of their choosing, move to 50% of the distance, then continue shooting. The target will then tell you how fast your pellet is moving based on where it hits at the shorter range.

For example, I zero my gun in at 50yd. I would then fire at 25yd and compare the paper chronograph speed to the actual chronograph.

Is anyone willing to help me validate my model? Thank you! There is a PDF file attached that can be printed on any standard household printer.



View attachment ZeroAt100_ShootAt50.0.pdf

We hunt pigeons at an industrial dairy farm on a weekly basis. The owner just put new fiberglass roofs on his barns. We have been using P-rods mostly and detuned them to shoot .22 pellets at 10.8 foot pounds or 585 FPS using 14.3 CPHPs. If we miss a bird we still put holes through the roof inside 40 yards. If we slow the 22s even further they become increasingly more unstable which produces more fliers. So I am wondering if going to a .177 pellet, will this have less chance of putting holes in the roof when the foot pounds of energy is lower?

Hypothetically, if a .22 and .177 BOTH had the same foot pounds of energy, would the smaller caliber, concentrating that same energy into a smaller area, have more chance to penetrate a fiberglass roof? I would think spreading the "same" energy into a wider area (larger caliber and POI footprint) might have less chance of penetration?

I am not that experienced using .177s. I had a Crosman Challenger for a brief while and it was pretty much a 10M gun which loved 8 grain wad cutters but shoot those WCs outdoors and the slightest wind would blow them all over the place. Even though we shoot inside barns, they have fans blowing so there is air movement. Are .177 round nose, shot at slower velocities, stable in a some wind?

Is there a general lowest speed range where .177s are accurate? Using the search function here it seems its similar to 22s in that 177s prefer 880-920 FPS too? I've found that when dropping below 700 FPS in .22s they start to lose accuracy and have more fliers.

Back to the title, I guess I am looking for suggestions to find a pellet caliber, weight and speed that won't poke holes in the fiberglass roofing and will still have enough energy to humanely drop a pigeon at 40 yards. Ideally I would love to find some scrap pieces of the same roofing to shoot at to find out what speed or energy level I need to stay below, but sadly I don't.

4 hours of airgun madness condensed into 13 minutes!

ZAN Projectiles just debuted some fun, edgy, and playful artwork. To celebrate, ZAN would like to thank the AGN community by giving away 3 hooded sweatshirts over the next 3 weeks!



The 2nd giveaway begins now and ends May 10th, at 10pm CST. A single winner will be selected with a random number generator the following day.

To ENTER - Simply reply to this thread below with the word "IN".

Good luck everyone!!! May you have the "Eye of the Tiger" like Zan the man himself


ATTENTION PARTICIPANTS:
This is a private giveaway that is open to residents where ever ZAN ships. Multiple entries within the same week by the same contestant will result in disqualification. Prizes must be claimed within 10 days of the event’s end.

*** Please do NOT subscribe to notifications from this topic or you will receive an email alert every time someone submits a guess! ***

This breathing tank comes with a s410 but not sure if it works with the s410 or not or should I buy a new air tank

Howdy all.

I've just bought a vertebrate pest control business, and am looking to get into shooting smaller pests such as rabbits, pigeons, rats etc.

I've got an array of firearms, but no decent air rifle. I'm looking for advice on what rifle (pcp) would best handle aussie conditions, and will be suitable to take down rats through to foxes. Been looking at the FX Impact M3 and Maverick, but mixed reviews have me cautious on dropping $3k+
I like the bullpup design for its compactness while not compromising on barrel length. Looking for probably a 600mm or 700mm barrel.

Does anyone have any suggestions? I'm in south australia, if that helps at all.

19 yards in the hostas next to the foundation.

21.5 JTS Semi dome. Theses pellets shoot @ 860fps out of my AA s500.

Hit the little guy between the eye and ear and out the same spot on the other side.

The JTS performed nicely in the wind at 25 and 50 yards. Next time I order, I will get a bunch.

This may be a dumb question so forgive me. Let's just say I have a .30 cal rig setup with a moderator specifically bought with and for the .30 cal. Months later I decide I don't need that much power and get a.177 barrell. I use the same moderator but noticed groups are speratic where they were tight with the .30. I take the moderator off and groups tighten up.

The question is, if a moderator is rated for a caliber bigger than the current setup will it make a difference?

I have my opinion, but it's just that. Anyone have empirical data either way?

SOLD TO Pneumatic. THANKS

Just recently resealed by Firewalker here on the forum, holds air forever now.. Black Arts barrel band and brand new Laminate stock.. this gun is very accurate with Hades and FX 25.39 gr pellets.. will shoot 1 inch or under at 62 yds with either pellet when I do my part. Nothing has been done to gun other then barrel band and reseal.. junked the original plastic stock. Only marks are from screws/original barrel band can be seen in pics, easily covered with marker. Scope/ rings not included.
Only selling because just bought a Walnut S510 Extra in .25
385.00 sh. lower 48..